EPRO PR9376/010-011 Proximity Sensor | Replacement, Equivalent & Selection Guide
The EPRO PR9376/010-011 is a high-precision eddy-current proximity sensor designed for non-contact displacement and vibration measurement in rotating machinery protection systems. This page provides full technical specifications, compatible replacement models, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | EPRO (part of Baker Hughes / Bently Nevada ecosystem) |
| Part Number | PR9376/010-011 |
| Type | Eddy-Current Proximity Sensor (Non-contact) |
| Measurement Range | 0 – 2 mm (typical linear range) |
| Sensitivity | 8 mV/µm (nominal) |
| Operating Temperature | -35°C to +120°C |
| Cable Length | 1.0 m (extension cable required for full system) |
| Connector Type | MIL-C-5015 compatible |
| Target Material | Steel / Inconel (ferromagnetic and non-ferromagnetic) |
| Supply Voltage | -24 VDC (via driver/oscillator) |
| Output Signal | Voltage proportional to gap distance |
| Weight | 580 g (with cable) |
| Approvals | CE, ATEX (consult datasheet for zone classification) |
Compatible Replacement & Equivalent Models
The following models are functionally equivalent or drop-in compatible with the EPRO PR9376/010-011. Always verify mechanical dimensions, cable length, and driver compatibility before substitution.
| Brand | Model | Notes |
|---|---|---|
| EPRO | PR9376/010-010 | Same sensor, 0.5 m cable variant — verify cable length requirement |
| EPRO | PR9376/020-011 | Extended range variant (0–4 mm); confirm driver calibration |
| Bently Nevada | 330101-00-06-10-02-00 | 3300 XL 8mm series; functionally equivalent in most turbomachinery applications |
| Bently Nevada | 330103-00-06-10-02-00 | 3300 XL 11mm series; wider gap range |
| Metrix | ST5484E | Compatible with EPRO drivers; confirm sensitivity matching |
| Wilcoxon / Amphenol | PC420 | Alternative eddy-current sensor; verify system driver compatibility |
⚠ Disclaimer: Replacement compatibility must be validated by a qualified engineer. Konmask.com supplies OEM and equivalent parts; consult our team for application-specific guidance.
Why Choose the Original Model
- Factory-calibrated sensitivity — 8 mV/µm matched to EPRO driver/oscillator pairs (e.g., PR9268 series)
- Proven reliability in gas turbines, steam turbines, compressors, and pumps worldwide
- Full API 670 compliance for machinery protection systems
- Seamless integration with EPRO MMS 6000, MMS 3000, and compatible Bently Nevada 3500 racks
- Traceability — OEM documentation, calibration certificates, and material certs available
Typical Applications
- Radial shaft vibration monitoring on rotating machinery
- Axial thrust position measurement on turbines and compressors
- Differential expansion monitoring in steam turbines
- Eccentricity and rotor runout measurement
- Speed and phase reference (keyphasor) applications
- Oil & gas, power generation, petrochemical, and marine industries
System Compatibility
The PR9376/010-011 sensor is designed to operate as part of a complete eddy-current measurement chain. Ensure the following system components are matched:
- Driver/Oscillator: EPRO PR9268/xxx series (specify cable length and range)
- Extension Cable: EPRO PR9376/xxx extension cables (total cable length must match driver calibration)
- Monitoring Rack: EPRO MMS 6000 / MMS 3000, or Bently Nevada 3500 series (with appropriate I/O module)
- Target Gap: Calibrated gap per OEM datasheet (typically 1.0 mm nominal for 0–2 mm range)
Selection Guide
Use the following criteria to confirm the PR9376/010-011 is the correct sensor for your application:
- ✅ Gap range required: 0–2 mm linear range
- ✅ Cable length: 1.0 m sensor cable (total system cable length determined by extension cable)
- ✅ Target material: Steel or Inconel shaft
- ✅ Driver compatibility: EPRO PR9268 series driver
- ✅ Environment: Operating temperature within -35°C to +120°C
- ✅ Certification: CE / ATEX required for hazardous area installations
If your application requires a different cable length, gap range, or connector type, contact our team — we stock multiple PR9376 variants and can advise on the correct suffix.
Quality Assurance & Sourcing
- Source: Authorized distributors, OEM surplus, and certified refurbished stock
- Inspection: All units inspected for physical integrity and connector condition prior to dispatch
- Documentation: Original OEM datasheet, calibration certificate (where available), and packing list included
- Packaging: Anti-static, shock-protected packaging for international freight
- Lead Time: In-stock units ship within 3–5 business days; sourced units 2–4 weeks (contact for current availability)
- Warranty: 12-month warranty against manufacturing defects on OEM units
How to Order
- Confirm part number: EPRO PR9376/010-011
- Specify quantity and required delivery date
- Provide end-use application details (optional but recommended for compatibility check)
- Request a formal quotation via email or phone
- Submit purchase order — we accept T/T, L/C, and major B2B payment terms
📧 Email: [email protected]
📞 Phone/WhatsApp: +0086 19859288691
🌐 Website: https://Konmask.com
Replacement & Compatibility FAQ
Q: Can I use the PR9376/010-011 with a Bently Nevada 3500 rack?
A: Yes, with the appropriate interface module and driver. The output signal (voltage vs. gap) is compatible, but driver calibration must match. Consult our team for system-level verification.
Q: What is the difference between PR9376/010-010 and PR9376/010-011?
A: The last suffix typically denotes cable length or connector variant. The /010-011 has a 1.0 m cable. Verify with the OEM datasheet or contact us for clarification.
Q: Is a Bently Nevada 330101 a direct drop-in replacement?
A: Functionally similar, but mechanical dimensions and connector types differ. A qualified engineer must verify fit, gap, and driver compatibility before substitution in a live system.
Q: Do you supply calibration certificates?
A: Yes, calibration certificates are available for OEM new units. For surplus stock, functional test reports are provided upon request.
Q: Can you source other EPRO PR9376 variants?
A: Yes. We stock and source multiple PR9376 variants. Contact us with your full part number and we will confirm availability and pricing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691





