Industrial Burner Safety Solution – Honeywell C7061A1012 | C7061 Series
Where This Product Is Used
The Honeywell C7061A1012 UV Flame Detector is engineered for demanding industrial combustion environments where reliable flame supervision is non-negotiable. Typical deployment sites include:
- Industrial boilers – power generation plants, district heating systems, and process steam boilers requiring continuous flame monitoring
- Process furnaces & kilns – petrochemical, cement, and glass manufacturing where burner failure causes costly downtime
- Thermal oxidizers & incinerators – waste-gas combustion systems mandating fail-safe flame detection per NFPA 86
- Gas turbine combustors – auxiliary burner supervision in combined-cycle power plants
- Marine & offshore burner systems – shipboard boilers and offshore platform heaters operating under IEC/ATEX-rated conditions
- Commercial HVAC heating systems – large-scale air-handling units with direct-fired burners
Technical Specifications
- Model / SKU: C7061A1012
- Series: C7061
- Brand: Honeywell
- Detector Type: Ultraviolet (UV) Flame Detector
- Spectral Response: UV range (185–260 nm), insensitive to visible light and infrared radiation
- Supply Voltage: 120 / 240 VAC, 50/60 Hz (compatible with Honeywell R4140 / R7140 relay modules)
- Output Signal: Flame relay contact (normally open / normally closed)
- Response Time: ≤ 1 second flame-on; ≤ 2 seconds flame-out (typical)
- Ambient Temperature: –40°C to +60°C (–40°F to +140°F)
- Ingress Protection: IP65 (dust-tight, water jet resistant)
- Mounting: Standard 1-inch NPT threaded fitting; compatible with Honeywell sight-pipe assemblies
- Weight: 1,620 g (with housing)
- Approvals: UL Listed, CE Marked, FM Approved
Why Engineers Specify This Model
- UV-only detection eliminates false trips from hot refractory glow, sunlight, or arc welding — critical in high-ambient-radiation environments
- Self-checking capability (when paired with R7140 amplifier) provides continuous internal diagnostics without interrupting burner operation
- Broad fuel compatibility — detects UV emissions from natural gas, propane, fuel oil, hydrogen, and coal-derived syngas flames
- Long service life — Geiger-Müller tube design rated for >10,000 hours MTBF in continuous duty
- Drop-in replacement for legacy C7027, C7035, and C7044 detectors on existing Honeywell burner management systems
- Compact form factor simplifies retrofit into tight burner-front panels without re-piping sight tubes
Complete System Bill of Materials
For a fully functional Honeywell UV flame supervision loop, engineers typically specify:
- C7061A1012 — UV Flame Detector (this unit)
- R7140L1009 or R4140M1013 — Flame Amplifier / Relay Module
- Q179 or Q624 — Sight Pipe Assembly (stainless, with purge fitting)
- ST7800A1039 — Keyboard Display Module (for R7800-series BMS integration)
- Y8610U — UV Scanner Mounting Flange Kit
- RM7800L1087 — Burner Management System Controller (for complete BMS solution)
Compliance & Industry Standards
- NFPA 86 – Standard for Ovens and Furnaces (flame supervision requirements)
- EN 298 – Automatic gas burner control systems for gas burners and gas burning appliances
- IEC 60730-2-5 – Automatic electrical controls for household and similar use
- UL 372 – Primary Safety Controls for Gas- and Oil-Fired Appliances
- FM 7610 – Approval Standard for Ultraviolet Flame Detectors
- ATEX / IECEx – Consult factory for zone-rated variants
Quality Assurance & Sourcing
Every Honeywell C7061A1012 unit shipped from Konmask.com undergoes the following verification process:
- Visual inspection against Honeywell OEM packaging and label authentication codes
- Date-code and lot traceability recorded at intake
- Functional continuity check on UV tube and connector pins prior to dispatch
- Shipped in original anti-static packaging with full datasheet documentation
Konmask.com sources exclusively from authorized Honeywell distributors and verified surplus channels with documented chain of custody. We do not sell counterfeit, refurbished-as-new, or unmarked parts.
How to Source This Part
- In-stock orders: Add to cart and check out — most orders ship within 1–2 business days from our Hong Kong warehouse
- Bulk / project orders: Contact support@konmask.com for volume pricing and lead-time confirmation
- Urgent requirements: Call or WhatsApp +0086 19859288691 for same-day quotation
- OEM / integrator accounts: Request a net-terms application for recurring procurement
Application-Specific FAQ
Q: Can the C7061A1012 be used without a Honeywell relay amplifier?
A: No. The C7061A1012 is a passive UV sensor that requires a compatible Honeywell flame amplifier (e.g., R7140, R4140) to provide power and process the output signal. It cannot drive a load directly.
Q: What is the maximum sight-tube length for reliable detection?
A: Honeywell recommends a maximum sight-tube length of 24 inches (610 mm) for standard applications. Longer tubes require purge air to prevent UV attenuation from combustion deposits.
Q: Is the C7061A1012 suitable for oil-fired burners?
A: Yes. The UV tube responds to the UV spectrum emitted by both gas and oil flames. Ensure the sight tube is kept clean, as oil mist deposits can attenuate UV transmission over time.
Q: How does UV detection differ from infrared (IR) detection in this application?
A: UV detectors respond only to the ultraviolet radiation produced by active combustion, making them immune to false signals from hot refractory surfaces or ambient IR sources — a key advantage in high-temperature furnace environments.
Q: What is the replacement interval for the C7061A1012?
A: Honeywell recommends annual inspection and replacement every 3–5 years under continuous duty, or per the site’s preventive maintenance schedule. The Geiger-Müller tube degrades over time and should be tested with a calibrated UV source.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691




