SIEMENS 6EP1336-2BA10 – Regulated 24VDC/10A Power Supply | SITOP Modular Platform
Engineering Background
The SIEMENS SITOP power supply family has been the backbone of industrial control cabinets worldwide for decades. Engineered to IEC/EN 61131-2 and UL 508 standards, SITOP units deliver stable, low-ripple DC power to PLCs, field devices, and safety circuits in the most demanding environments. The 6EP1336-2BA10 is the 10 A flagship of the SITOP Modular series, combining wide-range AC input with precision output regulation and comprehensive diagnostic features.
Product Positioning
Designed for procurement engineers who require a drop-in, specification-compliant replacement or new-build power supply for SIMATIC S7, S5, and third-party PLC panels. The 6EP1336-2BA10 eliminates derating concerns in high-ambient installations and provides the headroom needed for inrush-heavy actuator loads.
Complete Technical Specifications
| Parameter | Value |
|---|---|
| Siemens Order Number | 6EP1336-2BA10 |
| Product Family | SITOP Modular |
| Input Voltage (AC) | 120 – 230 V AC (wide-range), 50/60 Hz |
| Input Voltage (DC) | 110 – 300 V DC |
| Output Voltage | 24 V DC (adjustable 22.8 – 26.4 V) |
| Output Current (rated) | 10 A |
| Output Power | 240 W |
| Efficiency | ≥ 91 % (at full load, 230 V AC) |
| Ripple & Noise | < 50 mVpp |
| Hold-up Time | ≥ 20 ms (at 230 V AC, full load) |
| Overload / Short-circuit | Electronic current limiting + auto-restart |
| Overvoltage Protection | Crowbar circuit, ≤ 30 V DC |
| Parallel Operation | Yes (redundancy & power boost) |
| Signaling Output | Relay contact (DC OK), floating, 24 V / 1 A |
| Mounting | 35 mm DIN rail (EN 60715) |
| Dimensions (W × H × D) | 80 × 125 × 120 mm |
| Weight | approx. 2,300 g |
| Ambient Temperature (operation) | -25 °C … +70 °C |
| Ambient Temperature (storage) | -40 °C … +85 °C |
| Relative Humidity | 5 – 95 % (non-condensing) |
| Protection Class | IP20 |
| Certifications | CE, UL 508, cULus, GL, ATEX Zone 2 |
| MTBF | > 500,000 h (at 40 °C, full load) |
Proven Application Environments
- SIMATIC S7-300 / S7-400 / S7-1500 panels – primary 24 V DC bus supply for CPU, I/O racks, and HMI
- Process automation (DCS cabinets) – stable reference voltage for transmitters, positioners, and HART devices
- Machine tool & robotics – servo drive logic supply with high hold-up time for safe deceleration
- Building automation (BMS) – DDC controller and field bus gateway power
- Railway & transportation – wide DC input range supports 110 V DC battery-backed systems
- Hazardous area Zone 2 – ATEX-certified for use in Ex e / Ex n enclosures
Engineering Advantages
- Wide-range input – single SKU covers 120 V and 230 V AC grids globally; no tap switching required
- High efficiency ≥ 91 % – reduces heat dissipation, extends cabinet thermal margin, lowers energy cost
- Parallel-capable architecture – connect two units for N+1 redundancy or 20 A boost without external OR-ing diodes
- Floating relay DC OK contact – direct integration with PLC digital input for predictive maintenance alerting
- Electronic overload protection – eliminates nuisance fuse replacements; auto-restarts after fault clearance
- ATEX Zone 2 approval – single approved unit for both standard and light hazardous-area installations
- Compact 80 mm width – maximises DIN rail density in space-constrained enclosures
System Architecture & Signal Flow
AC mains (120–230 V) → EMC input filter → PFC stage → isolated DC/DC converter → output filter → 24 V DC bus. The internal microcontroller continuously monitors output voltage and current; on overload detection it activates constant-current limiting and simultaneously de-energises the DC OK relay, signalling the host PLC within < 5 ms. Output voltage is adjustable via front-panel potentiometer (22.8–26.4 V) to compensate for long cable runs. For redundant topologies, two 6EP1336-2BA10 units are connected in parallel; the lower-impedance unit automatically assumes the larger share of load current, with passive current balancing ensuring < 10 % imbalance.
Sourcing & Quality Verification
- All units sourced from authorised Siemens distribution channels or verified surplus with full traceability documentation
- Each unit inspected against Siemens factory test criteria: output voltage accuracy (±1 %), ripple, DC OK relay function, and thermal performance
- Firmware version and hardware revision recorded at goods-in; supplied with original Siemens packaging and datasheet
- Certificate of Conformity (CoC) and test report available on request
- Anti-counterfeit verification: holographic label, PCB date code, and Siemens MLFB label cross-checked
Procurement Process
- Confirm quantity & lead time – contact support@konmask.com or call +0086 19859288691 for real-time stock status
- Request quotation – provide project name, delivery address, and required delivery date; quotation issued within 4 business hours
- Place order – via Konmask.com checkout (credit card, T/T, PayPal) or purchase order for approved accounts
- Inspection & dispatch – units tested, packed with ESD protection, and shipped within 1–3 business days
- Documentation – commercial invoice, packing list, CoC, and datasheet included; HS Code 8504.40 for customs clearance
Technical FAQ
Q: Can the 6EP1336-2BA10 replace the older 6EP1336-1SH01?
A: Yes. The 2BA10 is the direct successor with identical output ratings and DIN rail footprint; terminal positions are compatible.
Q: Is derating required above 60 °C ambient?
A: The unit is rated to 70 °C at full 10 A load. No derating is required within the specified range; above 70 °C, reduce load by 2.5 % per °C.
Q: Can I use this unit on a 48 V DC input bus?
A: No. The DC input range is 110–300 V DC. For 48 V DC input applications, specify the 6EP1336-3BA10 variant.
Q: How do I wire the DC OK relay for PLC monitoring?
A: Terminals 11 (NO) and 12 (COM) provide a floating normally-open contact. Connect to a 24 V DI channel; the contact closes when output voltage is within ±5 % of set point.
Q: What is the warranty period?
A: Konmask provides a 12-month warranty covering manufacturing defects. Siemens factory warranty terms apply to new-in-box units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691




