ABB C1900/0263/0260A C1900/0263 Control Board | Replacement, Equivalent & Selection Guide
The ABB C1900/0263/0260A (also referenced as C1900/0263) is a dedicated control board designed for ABB industrial automation and drive systems. This page provides a comprehensive selection guide covering technical specifications, compatible replacement models, application scenarios, and sourcing assurance — helping engineers and procurement teams make confident, spec-accurate decisions.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABB |
| Part Number | C1900/0263/0260A |
| Cross Reference | C1900/0263 |
| Module Type | Control Board / PCB Assembly |
| Weight | 450 g (approx.) |
| Condition | New / Refurbished / Tested Available |
| Origin | ABB OEM |
| Warranty | 12 Months |
Note: For full electrical ratings (voltage, current, I/O count), please contact our technical team or refer to the ABB product datasheet.
Compatible Replacement & Equivalent Models
When the original C1900/0263/0260A is unavailable or discontinued, the following models may serve as functional equivalents depending on your system configuration. Always verify firmware and hardware revision compatibility before substitution.
- C1900/0263 — Direct cross-reference; same functional designation, different revision suffix
- ABB SDCS-CON-2 — Common DCS control board used in ABB DCS 400/600 series; verify I/O mapping
- ABB SDCS-CON-4 — Enhanced version with extended diagnostics; backward-compatible in many configurations
- ABB RMIO-11C / RMIO-02C — Control boards used in ACS800 series; applicable if system platform matches
- Third-party compatible boards — Available upon request; must pass functional test protocol before shipment
⚠ Important: Replacement suitability depends on drive series, firmware version, and I/O configuration. Contact Konmask technical support for a verified compatibility check before ordering a substitute.
Why Choose the Original Model
- OEM Precision: Designed and validated by ABB for exact fit, form, and function within the target system
- Firmware Integrity: Pre-loaded with ABB-certified firmware; no re-flashing or parameter migration required
- Reduced Commissioning Risk: Eliminates compatibility unknowns associated with third-party or cross-series substitutes
- Long-Term Support: ABB spare parts ecosystem ensures availability of documentation, calibration tools, and technical support
- Warranty Coverage: OEM parts maintain system warranty validity; aftermarket substitutes may void existing service agreements
Typical Applications
- ABB DC drive systems (DCS 400 / DCS 600 series) requiring control board replacement or upgrade
- Industrial motor control centers (MCC) in manufacturing, mining, and process industries
- Paper & pulp, steel, and cement plant automation systems using ABB drive platforms
- Retrofit and modernization projects replacing legacy ABB control hardware
- Preventive maintenance stock for critical production lines with ABB drive infrastructure
System Compatibility
The C1900/0263/0260A control board is primarily associated with ABB’s industrial drive and automation platforms. Confirmed or likely compatible systems include:
- ABB DCS 400 / DCS 600 DC Drive Series
- ABB Advant Controller platforms (where applicable)
- ABB industrial automation panels using C1900-series PCB assemblies
For systems not listed above, provide your drive nameplate data and existing board part number to our team for a compatibility assessment.
Selection Guide
Use the following decision framework to select the correct control board for your application:
- Step 1 — Identify your drive series: Confirm the ABB drive model (e.g., DCS 400, DCS 600, ACS800) from the nameplate
- Step 2 — Match the part number: Use C1900/0263/0260A if it matches your existing board label exactly
- Step 3 — Check hardware revision: Confirm PCB revision suffix (e.g., /0260A) matches your system’s requirement
- Step 4 — Evaluate alternatives: If the original is unavailable, share your system specs with Konmask for a verified equivalent recommendation
- Step 5 — Confirm firmware: For refurbished units, verify firmware version compatibility with your drive controller
Quality Assurance & Sourcing
- Source Traceability: All units sourced from authorized ABB distributors or verified industrial surplus channels
- Incoming Inspection: Visual inspection, functional power-on test, and parameter verification performed on every unit
- Anti-Counterfeit Measures: Component markings, PCB silkscreen, and serial numbers verified against ABB reference standards
- Packaging: ESD-safe anti-static packaging with moisture barrier; suitable for international air and sea freight
- Warranty: 12-month warranty covering manufacturing defects and functional failure under normal operating conditions
How to Order
- Online: Add to cart directly on this page — stock availability confirmed at checkout
- Email RFQ: Send part number, quantity, and required delivery date to [email protected]
- Phone / WhatsApp: +0086 19859288691 — available for urgent procurement and technical pre-sales consultation
- Lead Time: In-stock units ship within 1–3 business days; sourced units typically 5–15 business days
- Payment: T/T (bank transfer), PayPal, and trade assurance options available
- Export: DDP / DAP / EXW terms available; export documentation (CO, packing list, commercial invoice) provided
Replacement & Compatibility FAQ
Q: Can C1900/0263 be used as a direct replacement for C1900/0263/0260A?
A: In most cases yes — the base part number is identical. The suffix /0260A denotes a hardware revision. Confirm the revision is compatible with your drive firmware before installation.
Q: Is a refurbished unit safe for production use?
A: Yes, provided it has passed full functional testing. All Konmask refurbished units undergo power-on test, I/O verification, and burn-in before shipment.
Q: Do you provide a test report or certificate of conformance?
A: Yes. A functional test report and certificate of conformance are available upon request for all units.
Q: What if the part number I need is not in stock?
A: Contact us with your full system details. We maintain an extensive sourcing network for obsolete and hard-to-find ABB components.
Q: Can I return the board if it is not compatible?
A: Yes, within 30 days of receipt, subject to our return policy. Units must be unused and in original packaging.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691




