Bently Nevada 330104-08-14-10-02-00 — 8mm Proximity Transducer System | 3300 XL Series
The Bently Nevada 330104-08-14-10-02-00 is a complete proximity transducer system engineered for continuous, non-contact measurement of radial shaft vibration, axial position, and differential expansion in rotating machinery. Designed as part of the industry-standard 3300 XL Series, this system is the preferred choice of rotating equipment engineers worldwide for turbine, compressor, and pump protection applications.
Engineering Background: Bently Nevada, a Baker Hughes company, pioneered eddy-current proximity sensing technology and remains the global benchmark for machinery protection instrumentation. The 3300 XL Series represents decades of field-proven reliability in the most demanding industrial environments — from offshore platforms to petrochemical complexes.
Product Positioning: This kit — comprising an 8mm probe, 14-inch (355mm) extension cable, and compatible driver/oscillator — delivers a calibrated, plug-and-play solution for API 670-compliant vibration monitoring systems. It is the direct replacement and upgrade path for legacy 3300 Series installations.
Complete Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 330104-08-14-10-02-00 |
| Series / Platform | Bently Nevada 3300 XL Proximity Transducer System |
| Probe Tip Diameter | 8 mm |
| Extension Cable Length | 14 inches (355 mm) |
| Driver/Oscillator | Included (3300 XL compatible) |
| Measurement Type | Non-contact eddy-current displacement |
| Output Signal | –24 VDC nominal bias; linear voltage output proportional to gap |
| Scale Factor | 200 mV/mil (7.87 V/mm) nominal |
| Linear Range | 10–90 mil (0.25–2.29 mm) |
| Frequency Response | DC to 10,000 Hz (–3 dB) |
| Supply Voltage | –24 VDC (–20 to –26 VDC) |
| Temperature Range (Probe) | –35°C to +177°C (–31°F to +351°F) |
| Temperature Range (Driver) | –35°C to +85°C (–31°F to +185°F) |
| Connector Type | Integral coaxial, reverse-polarity protected |
| Probe Housing Material | 316 Stainless Steel |
| Target Material Compatibility | Steel, 4140 alloy steel (standard); consult factory for exotic alloys |
| Ingress Protection | IP67 (probe assembly) |
| Compliance | API 670, CE, RoHS |
| Country of Origin | United States |
| Weight (System) | Approx. 80 g |
Proven Application Environments
- Steam & Gas Turbines — Radial shaft vibration and axial thrust position monitoring per API 670
- Centrifugal & Reciprocating Compressors — Continuous orbit and gap measurement for predictive maintenance
- Pumps & Fans — Bearing housing vibration and shaft eccentricity detection
- Gearboxes — High-frequency mesh frequency monitoring up to 10 kHz
- Hydro Turbines — Slow-speed shaft position and runout measurement
- Marine Propulsion Systems — Shaft alignment and vibration in harsh, salt-spray environments
Engineering Advantages
- API 670 Compliant — Meets the most stringent international standard for machinery protection systems, ensuring acceptance by EPC contractors and end-user inspection teams.
- Plug-and-Play Replacement — Direct drop-in for existing 3300 XL installations; no recalibration of the monitoring rack required when replacing like-for-like.
- Extended Temperature Probe — Rated to +177°C probe tip temperature, suitable for hot-section turbine bearing pedestals without additional thermal isolation.
- High Frequency Response — DC to 10 kHz bandwidth captures both low-speed runout and high-frequency gear mesh events in a single sensor.
- Robust Stainless Steel Construction — 316 SS probe body resists corrosion in wet gas, H₂S, and hydrocarbon environments.
- Integral Cable System — Factory-matched probe, extension cable, and driver eliminate field calibration errors caused by mismatched components.
System Architecture & Signal Flow
The 330104-08-14-10-02-00 operates on the classic three-component eddy-current architecture:
- Probe (8mm tip) — Generates a high-frequency electromagnetic field. As the conductive target (shaft) moves within the linear range, eddy currents are induced, altering the probe’s impedance.
- Extension Cable (14 in / 355 mm) — Transmits the RF signal from the probe to the driver with minimal loss. Cable length is factory-matched and must not be field-modified.
- Driver/Oscillator — Demodulates the impedance change into a DC voltage output (–24 VDC bias, ±linear swing). Output feeds directly into Bently Nevada 3500 or 3300 monitoring racks, or any API 670-compliant monitor accepting –24 VDC eddy-current inputs.
Signal path: Probe tip → Extension cable → Driver output → Monitor input card → Alarm/trip relay logic → DCS/PLC
Sourcing & Quality Verification
- All units sourced through authorized industrial distribution channels or directly from verified OEM surplus inventories.
- Each system undergoes incoming inspection: visual examination, connector integrity check, and driver output verification against published scale factor tolerances.
- Serialization and date codes are verified against Bently Nevada manufacturing records where available.
- Packaging integrity (original OEM box preferred; industrial anti-static packaging for surplus units) is maintained throughout storage and shipment.
- Certificate of Conformance (CoC) available upon request for critical applications.
Procurement Process
- Confirm Part Number — Verify 330104-08-14-10-02-00 against your BOM or existing installation tag. Cross-reference probe tip diameter (8mm), cable length (14 in), and driver compatibility.
- Request Quote — Contact support@konmask.com or call +0086 19859288691 for volume pricing, lead time, and CoC availability.
- Place Order — Add to cart and complete checkout. Purchase orders (PO) accepted for qualified accounts — contact us to establish net terms.
- Shipping & Documentation — Standard export packaging; commercial invoice, packing list, and CoC dispatched with shipment. DDP/DAP Incoterms available.
- Incoming Inspection Support — Our technical team can assist with acceptance test procedures (ATP) and installation guidance upon request.
Technical FAQ
Q: Can I use a different cable length with this probe?
A: No. The probe, extension cable, and driver are a factory-calibrated system. Substituting a different cable length will shift the scale factor and linear range, invalidating API 670 compliance. Always replace as a matched set.
Q: Is this compatible with the Bently Nevada 3500 monitoring rack?
A: Yes. The 3300 XL driver output (–24 VDC, 200 mV/mil) is fully compatible with 3500 Series monitor input cards configured for 3300 XL transducers.
Q: What target material is required?
A: Standard calibration is for AISI 4140 alloy steel. For stainless steel, titanium, or other exotic alloys, a material correction factor must be applied. Contact our engineering team for target-specific calibration data.
Q: Can this probe be used in a hazardous area (ATEX/IECEx)?
A: The standard 330104-08-14-10-02-00 is not ATEX/IECEx certified. For hazardous area installations, specify the appropriate Bently Nevada intrinsically safe driver variant. Contact us for the correct part number.
Q: What is the lead time for this part?
A: In-stock units ship within 1–3 business days. For out-of-stock situations, typical lead time is 2–4 weeks. Contact us for real-time availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






