Bently Nevada 330130-080-10-05 Extension Cable – 3300 Series Proximity Transducer System
When a critical rotating machine loses its vibration signal chain, the consequences are immediate and severe: undetected shaft displacement, missed early-warning alerts, and potential catastrophic bearing or seal failure. In continuous-process industries — oil & gas, power generation, petrochemical — even minutes of unmonitored operation can translate into millions in unplanned downtime. The extension cable is the often-overlooked but mission-critical link between the eddy-current probe and the proximitor/driver, and a wrong or degraded cable breaks the entire measurement loop.
The Bently Nevada 330130-080-10-05 is a factory-specified extension cable engineered for the 3300 Series Proximity Transducer System — one of the most widely deployed machinery protection platforms in global heavy industry. With an 8-meter (approximately 26-foot) armored cable length and precision-matched impedance characteristics, this part ensures the eddy-current signal is transmitted with zero compromise from probe tip to the 3300 Series proximitor module. It is the OEM-designated interconnect for installations where probe-to-proximitor distances exceed standard probe cable reach, and it is trusted in thousands of turbine, compressor, and pump monitoring installations worldwide.
Technical Specifications
- Part Number: 330130-080-10-05
- Manufacturer: Bently Nevada (Baker Hughes)
- Series: 3300 Series Proximity Transducer System
- Cable Length: 8.0 m (26.2 ft)
- Cable Type: Armored extension cable
- Connector Type: MIL-spec coaxial, compatible with 3300 Series probes and proximitors
- Temperature Range: Suitable for industrial environments per Bently Nevada 3300 Series specifications
- Application: Eddy-current proximity transducer signal extension
- Compatibility: Bently Nevada 3300 Series probes and 3300 XL 8mm / 11mm proximitor drivers
Note: All specifications are based on Bently Nevada published documentation. Do not substitute with non-OEM cables — impedance mismatch will cause measurement errors and void system calibration.
Key Features & Benefits
- OEM-Specified Impedance Match: Maintains the precise electrical characteristics required for accurate eddy-current gap measurement — no signal degradation or calibration offset.
- Armored Construction: Robust mechanical protection against abrasion, vibration, and industrial fluids in harsh plant environments.
- 8-Meter Reach: Bridges the distance between probe mounting locations and remotely installed proximitor enclosures without signal loss.
- Plug-and-Play Compatibility: Factory-terminated connectors ensure correct polarity and shielding continuity — no field termination required.
- System Integrity: Preserves the calibrated performance of the full 3300 Series transducer system, keeping your machinery protection system API 670-compliant.
- Long Service Life: Designed for continuous-duty industrial service with minimal maintenance requirements.
Industry & Equipment Applications
- Oil & Gas: Gas turbines, centrifugal compressors, pipeline pumps, LNG trains
- Power Generation: Steam turbines, hydro generators, gas turbine-generators
- Petrochemical & Refining: Reactor charge pumps, cracked gas compressors, process blowers
- Pulp & Paper / Mining: Large rotating equipment requiring continuous vibration monitoring
- Marine & Offshore: Propulsion turbines and compressor trains on FPSOs and platforms
System Integration & Compatible Parts
The 330130-080-10-05 is designed to work within the complete Bently Nevada 3300 Series signal chain. Typical compatible components include:
- Probes: Bently Nevada 3300 XL 8mm probes (e.g., 330103 series) and 11mm probes (e.g., 330104 series)
- Proximitors/Drivers: Bently Nevada 3300 XL proximitor modules
- Monitoring Systems: Bently Nevada 3500 Series rack-based machinery protection systems
- Interconnect Cables: Matched probe cables from the 330130 family for other length requirements
When replacing or upgrading, always verify the complete cable assembly (probe cable + extension cable) totals the system-specified length to maintain calibration accuracy.
Our Quality Assurance Process
- Source Verification: All Bently Nevada parts are sourced from authorized distributors or verified surplus channels with full traceability documentation.
- Visual & Dimensional Inspection: Each unit is inspected for connector integrity, cable jacket condition, and correct part number labeling before shipment.
- Authenticity Check: Part numbers, date codes, and manufacturer markings are cross-referenced against Bently Nevada documentation.
- Secure Packaging: Anti-static and moisture-resistant packaging to protect connectors and cable during international transit.
- Documentation: Certificate of conformance and packing list provided with every shipment.
How to Order
- Submit an inquiry via the Contact Us form or email support@konmask.com with your required quantity and delivery timeline.
- Our technical team will confirm availability, lead time, and provide a formal quotation within 24 hours.
- Upon PO confirmation, we arrange export documentation, packaging, and your preferred freight method (DHL, FedEx, sea freight, etc.).
- Track your shipment with our provided AWB/tracking number until delivery.
Why Choose Konmask.com?
- Industrial Automation Specialists: We focus exclusively on PLC, DCS, and machinery protection components — not a generalist marketplace.
- Global B2B Supply: Serving engineering teams, MRO buyers, and EPC contractors across 40+ countries.
- Fast Inquiry Response: Dedicated technical sales team responds within 24 hours on business days.
- Competitive Pricing: Direct sourcing relationships enable competitive pricing on both single units and bulk orders.
- Export Expertise: Experienced in international shipping, customs documentation, and compliance for industrial components.
Frequently Asked Questions
- Q: Is the 330130-080-10-05 an OEM Bently Nevada part?
- A: Yes. This is the original Bently Nevada part number for an 8-meter extension cable in the 3300 Series proximity transducer system. We supply OEM parts sourced through verified channels.
- Q: Can I use a different length extension cable with my 3300 Series system?
- A: The total cable assembly length (probe cable + extension cable) must match the system’s calibrated specification. Substituting a different length will shift the proximitor’s output and require recalibration. Always consult your system documentation or contact us for guidance.
- Q: Do you offer expedited shipping for urgent plant shutdowns?
- A: Yes. We support urgent MRO requirements. Contact us directly at support@konmask.com or +0086 19859288691 and specify your required delivery date — we will advise on the fastest available shipping option.
- Q: What documentation is provided with the shipment?
- A: Standard shipments include a packing list and certificate of conformance. Additional documentation (e.g., country of origin certificate) can be arranged upon request.
- Q: Can you supply other cables in the 330130 series?
- A: Yes. We stock or can source multiple variants in the 330130 extension cable family with different lengths. Please contact us with your specific part number requirement.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
{
“@context”: “https://schema.org”,
“@graph”: [
{
“@type”: “Product”,
“name”: “Bently Nevada 330130-080-10-05 Extension Cable”,
“description”: “Bently Nevada 330130-080-10-05 is an 8-meter OEM extension cable for the 3300 Series Proximity Transducer System, used in industrial machinery vibration monitoring applications.”,
“sku”: “330130-080-10-05”,
“mpn”: “330130-080-10-05”,
“brand”: {
“@type”: “Brand”,
“name”: “Bently Nevada”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “Bently Nevada (Baker Hughes)”
},
“category”: “Industrial Automation / Vibration Monitoring / Extension Cable”,
“url”: “https://konmask.com/products/bently-nevada-330130-080-10-05-extension-cable-3300-series”,
“offers”: {
“@type”: “Offer”,
“url”: “https://konmask.com/products/bently-nevada-330130-080-10-05-extension-cable-3300-series”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
},
{
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Is the 330130-080-10-05 an OEM Bently Nevada part?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. This is the original Bently Nevada part number for an 8-meter extension cable in the 3300 Series proximity transducer system, sourced through verified channels.”
}
},
{
“@type”: “Question”,
“name”: “Can I use a different length extension cable with my 3300 Series system?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The total cable assembly length must match the system’s calibrated specification. Substituting a different length will shift the proximitor output and require recalibration.”
}
},
{
“@type”: “Question”,
“name”: “Do you offer expedited shipping for urgent plant shutdowns?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. Contact us at support@konmask.com or +0086 19859288691 with your required delivery date and we will advise on the fastest available shipping option.”
}
},
{
“@type”: “Question”,
“name”: “What documentation is provided with the shipment?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Standard shipments include a packing list and certificate of conformance. Additional documentation can be arranged upon request.”
}
},
{
“@type”: “Question”,
“name”: “Can you supply other cables in the 330130 series?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. We stock or can source multiple variants in the 330130 extension cable family with different lengths. Contact us with your specific part number.”
}
}
]
}
]
}
