Genuine BENTLY NEVADA 135137-01 Position I/O Module | 3500 Series – Verified Source
The Bently Nevada 135137-01 Position I/O Module is a mission-critical component within the 3500 Series Machinery Protection System — one of the most widely deployed vibration and position monitoring platforms in rotating machinery applications worldwide. This module serves as the primary interface for proximity probe inputs, enabling real-time shaft position measurement in turbines, compressors, pumps, and generators. Given its role in protecting high-value rotating assets, the 135137-01 is in constant demand across power generation, oil & gas, and petrochemical industries — and its scarcity in the secondary market has made it a prime target for counterfeit and substandard substitutes that can cause catastrophic machinery failures.
At Konmask, every 135137-01 unit we supply is sourced exclusively through verified industrial channels and subjected to our rigorous 4-step authentication and quality verification process before shipment. We do not deal in grey-market, refurbished-without-disclosure, or unverified stock. Our commitment to supplying only genuine, authentic, and verified Bently Nevada hardware means you receive a module that performs to OEM specification — protecting your machinery and your operations. Each unit is accompanied by full traceability documentation upon request.
Technical Specifications
| Part Number | 135137-01 |
| Brand / OEM | Bently Nevada (Baker Hughes) |
| Series | 3500 Machinery Protection System |
| Module Type | Position I/O Module |
| Input Channels | 4 channels (proximity probe inputs) |
| Measurement Type | Radial position, axial position (thrust) |
| Input Signal | -24 VDC proximity probe (Bently Nevada standard) |
| Output | 4–20 mA analog output per channel; relay outputs via rack backplane |
| Power Supply | Supplied via 3500 rack backplane (±24 VDC) |
| Communication | 3500 rack backplane bus; Modbus RTU / TCP optional via gateway |
| Alarm Setpoints | Alert and Danger setpoints, configurable via System 1 / Rack Configuration Software |
| Operating Temperature | 0°C to +65°C (32°F to 149°F) |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% non-condensing |
| Dimensions | Standard 3500 series single-slot module form factor |
| Weight | Approx. 400 g |
| Certifications | CE, SIL 1 (system-level), FM/CSA (system-level) |
| RoHS Compliance | Yes |
Specifications verified against Bently Nevada official documentation — 3500/42M Position Monitor Manual (Part No. 129768-01).
Our 4-Step Quality Verification Process
Every 135137-01 unit supplied by Konmask passes through the following verification stages before it reaches you:
- Step 1 — Physical Authenticity Inspection: Each module is visually inspected against known-genuine reference units. We verify OEM label integrity, PCB markings, connector pin condition, housing finish, and firmware revision stickers. Counterfeit units are identified and rejected at this stage.
- Step 2 — Functional Bench Test: The module is powered up in a 3500-series rack test environment. All four input channels are exercised with calibrated proximity probe simulators. Analog output accuracy (4–20 mA), alarm relay actuation, and backplane communication are verified against OEM specifications.
- Step 3 — Documentation & Traceability Check: We verify the unit’s serial number against available OEM traceability records. A Certificate of Conformance (COC), Country of Origin (COO) Declaration, and test report are prepared and available upon request. Packing list and photographic evidence of the unit pre-shipment are provided as standard.
- Step 4 — Packaging & ESD Protection: Verified units are cleaned, placed in anti-static ESD bags, and packed in rigid foam-lined export cartons. Each shipment includes a tamper-evident seal and a Konmask inspection label with QC date and inspector ID.
Key Features & Benefits
- Genuine OEM Hardware: 100% authentic Bently Nevada 135137-01 — not a clone, not a substitute. Direct drop-in replacement for existing 3500 rack installations without reconfiguration.
- 4-Channel Position Monitoring: Simultaneously monitors radial and axial shaft position across four independent channels, enabling comprehensive machinery health assessment per API 670 (5th Edition) recommendations.
- High-Resolution Measurement: Supports proximity probe inputs with measurement resolution suitable for detecting shaft displacement changes as small as 1 µm, meeting the sensitivity requirements of ISO 7919 for rotating shaft vibration monitoring.
- Seamless 3500 Rack Integration: Plug-and-play compatibility with all standard 3500 series rack configurations. Configurable via Bently Nevada System 1 software and Rack Configuration Software (RCS) without hardware modification.
- Dual-Setpoint Alarm Architecture: Independent Alert and Danger setpoints per channel with latching/non-latching relay outputs, supporting safety instrumented system (SIS) integration in compliance with IEC 61511 functional safety requirements.
- Proven Field Reliability: The 3500 series platform has accumulated millions of operating hours in critical rotating machinery applications globally. The 135137-01 module is a field-proven component with a documented track record in power generation and hydrocarbon processing environments.
Typical Applications
- Steam & Gas Turbines: Axial thrust position monitoring and radial shaft position measurement on turbine rotors in power generation plants, ensuring early detection of bearing wear and rotor displacement.
- Centrifugal Compressors: Shaft position monitoring in multi-stage centrifugal compressors in LNG, refinery, and gas processing facilities, protecting against surge-induced rotor contact.
- Boiler Feed Pumps: Radial and axial position monitoring on high-speed boiler feed pumps in thermal power stations, integrated with turbine protection systems.
- Hydro Turbines & Generators: Shaft position monitoring on large hydro-generator sets, providing continuous rotor eccentricity and thrust bearing condition data.
- Reciprocating Compressors: Rod drop and crosshead position monitoring in reciprocating compressors in upstream oil & gas applications.
- Industrial Fans & Blowers: Position monitoring on large induced-draft and forced-draft fans in cement, steel, and chemical processing plants where unplanned downtime carries significant production cost.
Compatible System Components
- Bently Nevada 3500/05 Rack Interface Module
- Bently Nevada 3500/15 Power Supply Module
- Bently Nevada 3500/20 Rack Configuration Module
- Bently Nevada 3300 XL / 3300 5mm Proximity Transducer Systems
- Bently Nevada 330100 / 330130 / 330180 Proximity Probes
- Bently Nevada 3500/92 Communication Gateway Module (Modbus/PROFIBUS)
- Bently Nevada System 1 Evolution Software (monitoring & diagnostics)
- Bently Nevada TDXnet / Rack Configuration Software (RCS)
Global Sourcing & Shipping Capabilities
Konmask supplies the 135137-01 to industrial customers across Asia-Pacific, the Middle East, Europe, and the Americas. Our primary service regions include China, India, South Korea, Japan, Singapore, UAE, Saudi Arabia, Germany, the Netherlands, the United States, and Brazil.
- Packaging Standard: Anti-static ESD bag + rigid foam-lined export carton + tamper-evident seal. All packaging meets ISTA 2A transit testing standards for fragile electronic equipment.
- Lead Time: In-stock units ship within 3–5 business days. For sourced units, typical lead time is 7–15 business days depending on origin and destination.
- Logistics: DHL Express, FedEx International Priority, and UPS Worldwide Express available. Sea freight and air freight consolidation available for bulk orders. All shipments include full commercial invoice, packing list, COO declaration, and COC documentation for customs clearance.
- Export Compliance: All shipments comply with applicable export control regulations. HS Code classification and export documentation provided as standard.
Certifications & Compliance Statement
- CE Marking (EMC Directive 2014/30/EU; Low Voltage Directive 2014/35/EU) — system-level
- SIL 1 Capable — as part of 3500 series system (IEC 61508 / IEC 61511)
- FM Approved / CSA Certified — system-level, Class I Division 2 (with appropriate rack configuration)
- RoHS Compliant (Directive 2011/65/EU)
- API 670 (5th Edition) — Machinery Protection Systems standard compliance
- ISO 9001:2015 — Konmask quality management system certification
Konmask Quality Commitment: We supply only genuine, verified Bently Nevada hardware. Every unit we ship has passed our 4-step inspection process. We provide full documentation transparency — COC, test reports, COO declarations, and pre-shipment photos are available for every order. If a unit does not perform to OEM specification upon receipt, we will replace it or provide a full refund. Our reputation is built on the authenticity and reliability of every component we supply.
How to Order
- Submit Your Inquiry: Contact us via the product page, email [email protected], or WhatsApp/WeChat at +0086 19859288691 with your required quantity, delivery destination, and any documentation requirements (COC, test report, COO).
- Receive Quotation & Confirmation: We respond within 24 hours with a formal quotation including unit price, lead time, shipping options, and available documentation. Stock photos and pre-shipment inspection reports can be provided before payment.
- Order Confirmation & Shipment: Upon order confirmation and payment, your unit undergoes final QC inspection, is packed to export standard, and ships with full documentation. Tracking information is provided within 24 hours of dispatch. Sample units and test reports are available for qualified buyers — contact us to discuss your requirements.
Authenticity & Trust FAQ
- Q: How can I verify that the 135137-01 I receive from Konmask is genuine Bently Nevada hardware?
- A: Every unit we supply is physically inspected and functionally tested before shipment. We provide pre-shipment photos showing the OEM label, serial number, and physical condition of the specific unit you will receive. Upon request, we can provide a Certificate of Conformance (COC) and a functional test report. You can also verify the serial number with Bently Nevada / Baker Hughes technical support after receipt.
- Q: What is your warranty and return policy for this module?
- A: We offer a 12-month warranty against defects in materials and workmanship from the date of shipment. If the module fails to perform to OEM specification under normal operating conditions within the warranty period, we will provide a replacement unit or full refund at our cost, including return shipping. Warranty claims require photographic evidence and a brief description of the failure mode.
- Q: Can you provide a test report or Certificate of Conformance before I place an order?
- A: Yes. For qualified buyers, we can provide a sample test report and COC template prior to order placement. For confirmed orders, a unit-specific test report, COC, and COO declaration are prepared as part of our standard 4-step verification process and included with shipment documentation. Contact us at [email protected] to request pre-order documentation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
