Combustible Gas Detection Solution – Bently Nevada 350800-01-180-00 | 3500 Series Machinery Protection System
The Bently Nevada 350800-01-180-00 is a precision gas sensor engineered for continuous combustible and hazardous gas detection in critical rotating machinery environments. As part of the renowned 3500 Series Machinery Protection System, this sensor integrates seamlessly into plant-wide safety and condition monitoring architectures — delivering real-time gas presence data that protects personnel, assets, and uptime.
Where This Product Is Used
This sensor is specified by process engineers and reliability teams across the most demanding industrial environments:
- Oil & Gas Upstream: Wellhead platforms, compressor stations, and gas gathering facilities where hydrocarbon leak detection is safety-critical.
- LNG & Petrochemical Plants: Turbine enclosures, heat exchanger bays, and pump rooms requiring continuous methane/LEL monitoring.
- Power Generation: Gas turbine packages and combined-cycle plants where hydrogen or natural gas leaks must be detected before ignition thresholds are reached.
- Offshore Platforms: ATEX/IECEx-rated zones where certified gas detection is mandated by classification societies (DNV, ABS, Lloyd’s).
- Chemical Processing: Reactor buildings and solvent storage areas with volatile organic compound (VOC) exposure risk.
- Pipeline Compression Stations: Integrated with SCADA and ESD systems for automated shutdown on gas detection events.
Technical Specifications
| Part Number | 350800-01-180-00 |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Series | 3500 Machinery Protection System |
| Product Type | Gas Sensor / Combustible Gas Detector |
| Detection Principle | Catalytic bead (pellistor) / Electrochemical (confirm with datasheet) |
| Measurement Range | 0–100% LEL (Lower Explosive Limit) |
| Cable Length | 180 ft (54.9 m) — encoded in part number suffix |
| Output Signal | 4–20 mA analog / digital protocol (3500 rack compatible) |
| Operating Temperature | -40°C to +85°C (typical; verify with OEM datasheet) |
| Ingress Protection | IP66 / IP67 (weatherproof enclosure) |
| Weight | 300 g (approx.) |
| Condition | New / Surplus New / Refurbished (specify on inquiry) |
Why Engineers Specify This Model
- Native 3500 System Integration: Plug-and-play compatibility with Bently Nevada 3500/62 Gas Monitor modules — no signal conditioning adapters required.
- 180 ft Cable Reach: The -180-00 suffix designates a 180-foot sensor cable, enabling remote sensor placement away from the rack in hazardous area installations.
- Proven Field Reliability: Deployed globally in thousands of turbomachinery installations; recognized by OEM packagers as the reference standard for gas detection in 3500 architectures.
- Simplified Compliance: Supports site compliance with IEC 60079, NFPA 72, and API RP 505 gas detection standards when installed per OEM guidelines.
- Reduced Downtime Risk: Early-warning gas detection prevents unplanned shutdowns, fire events, and regulatory incidents — protecting both assets and personnel.
Complete System Bill of Materials
The 350800-01-180-00 is typically deployed as part of a complete 3500 gas monitoring loop. Common companion components include:
- 3500/62 Gas Monitor Module — rack-mounted signal processing card
- 3500/05 Power Supply — system power for the 3500 rack
- 3500/20 Rack Interface Module (RIM) — communication gateway to DCS/SCADA
- 3500/92 Communication Gateway — Modbus/OPC-UA data output
- 350800-01-180-00 Sensor Cable Assembly — this unit
- Junction Box / Barrier Assembly — IS barrier for Zone 1/2 installations
Contact us with your full system configuration for a complete BOM quotation.
Compliance & Industry Standards
- IEC 60079-0 / IEC 60079-1 — Explosive Atmospheres Equipment
- ATEX Directive 2014/34/EU (where applicable)
- IECEx Certification Scheme
- API RP 505 — Recommended Practice for Installing Combustible Gas Detection Instruments
- NFPA 72 — National Fire Alarm and Signaling Code
- ISO 9001:2015 — Quality Management (Bently Nevada manufacturing)
Quality Assurance & Sourcing
At Konmask.com, every Bently Nevada component undergoes a structured verification process before shipment:
- Documentation Review: OEM part number, date codes, and labeling verified against Bently Nevada/Baker Hughes published specifications.
- Physical Inspection: Housing integrity, connector condition, cable jacket, and seal inspection performed by trained technicians.
- Functional Pre-Check: Where test equipment permits, sensor response and output signal are validated prior to dispatch.
- Traceability Record: Each unit ships with a condition report and sourcing traceability document available on request.
We source from authorized distributors, OEM surplus channels, and certified industrial resellers — never from unverified grey-market sources.
How to Source This Part
- Submit an RFQ: Email support@konmask.com with your required quantity, delivery timeline, and destination country.
- Receive a Quotation: We respond within 1 business day with pricing, lead time, and available condition grades.
- Confirm & Pay: Secure payment via T/T bank transfer, PayPal, or trade assurance platforms.
- Ship & Track: DHL / FedEx / UPS express worldwide; EXW, FOB, CIF Incoterms available.
Application-Specific FAQ
Q: Is the 350800-01-180-00 compatible with older 3500 rack generations?
A: Yes. The 3500 Series maintains backward compatibility across rack generations. Confirm firmware version of your 3500/62 module with your site engineer.
Q: Can this sensor be used in Zone 1 hazardous areas?
A: The 3500 gas sensor system is designed for hazardous area use. Verify the specific ATEX/IECEx certificate applicable to your installation zone with the OEM datasheet.
Q: What does the “-180-00” suffix mean?
A: The suffix encodes the sensor cable length — 180 feet (approximately 54.9 meters). This allows the sensor head to be located remotely from the 3500 rack in the field.
Q: Do you supply calibration gas or accessories?
A: We can source companion accessories including calibration gas kits, mounting hardware, and junction boxes. Include your requirements in your RFQ.
Q: What is the lead time for this part?
A: Typical lead time is 3–10 business days depending on stock availability. Expedited options available — contact us for urgent requirements.
Q: Can you provide a certificate of conformance?
A: Yes. A condition report and sourcing traceability document are available upon request for every unit shipped.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691





