EMERSON CE4006P2 KJ3241X1-BA1 12P2506X102 Redundant Serial Interface Card | Replacement, Equivalent & Selection Guide
The EMERSON CE4006P2 (also referenced as KJ3241X1-BA1 / 12P2506X102) is a Redundant Serial Interface Card designed for use within Emerson’s DeltaV Distributed Control System (DCS) platform. This card provides reliable, fault-tolerant serial communication for process automation environments where uptime and data integrity are critical. Konmask.com supplies both genuine OEM units and verified equivalent alternatives to support your maintenance and upgrade needs.
Technical Specifications
- Manufacturer: Emerson Electric / Fisher-Rosemount
- Part Numbers: CE4006P2 | KJ3241X1-BA1 | 12P2506X102
- Module Type: Redundant Serial Interface Card
- Platform: Emerson DeltaV DCS
- Communication Protocol: Serial (RS-232 / RS-485, platform-dependent)
- Redundancy: Yes — supports hot-standby redundant configuration
- Form Factor: DIN-rail / card-cage mountable module
- Weight: Approx. 180 g
- Operating Temperature: 0°C to 60°C (typical DeltaV card spec)
- Power Supply: Supplied via DeltaV carrier/backplane
- Certifications: CE, UL (verify with datasheet for specific revision)
Compatible Replacement & Equivalent Models
When the original CE4006P2 is unavailable or cost-prohibitive, the following models may serve as functional equivalents depending on your system revision and firmware version. Always verify compatibility with your DeltaV system integrator before substitution.
- KJ3241X1-BA1 — OEM alternate part number for the same card
- 12P2506X102 — Emerson internal revision reference
- KJ3241X1-BA2 / BA3 — Later hardware revisions; confirm firmware compatibility
- CE4002S2 / CE4004S2 — Non-redundant serial interface cards (single-channel fallback)
- Third-party DeltaV-compatible serial interface modules from approved vendors (contact Konmask for sourcing)
Note: Cross-referencing part numbers does not guarantee drop-in compatibility. Consult your system documentation or contact our technical team.
Why Choose the Original Model
- Guaranteed DeltaV Compatibility: Factory-validated for seamless integration with Emerson DeltaV controllers and I/O subsystems.
- Redundancy Architecture: Built-in hot-standby support minimizes process downtime during card failure.
- Long Field Life: Designed for continuous 24/7 industrial operation in harsh process environments.
- OEM Firmware Support: Eligible for Emerson firmware updates and technical support lifecycle.
- Traceability: Full OEM serialization and revision history for audit and compliance purposes.
Typical Applications
- Oil & gas upstream/downstream DCS communication networks
- Chemical and petrochemical plant process control systems
- Power generation and utilities automation
- Pharmaceutical manufacturing (FDA-regulated environments)
- Pulp, paper, and water treatment facilities
- Any DeltaV-based system requiring redundant serial device integration
System Compatibility
- DCS Platform: Emerson DeltaV (S-series, M-series controllers)
- DeltaV Versions: Compatible with DeltaV v10.x through v14.x (verify for v15+)
- Carrier/Backplane: Standard DeltaV 8-slot and 12-slot carriers
- Serial Devices: HART multiplexers, Modbus RTU devices, third-party analyzers, and legacy field instruments
- Not Compatible With: Non-DeltaV Emerson platforms (e.g., Ovation, ROC) without engineering review
Selection Guide
Use the following criteria to determine whether the CE4006P2 is the right card for your application:
- Do you require redundancy? → Yes: CE4006P2 (redundant). No: Consider CE4002S2 (single).
- How many serial ports are needed? → CE4006P2 supports up to 6 serial ports per card.
- What is your DeltaV version? → Confirm card revision matches your controller firmware baseline.
- Is this a replacement or new installation? → For replacement: match exact part number and hardware revision. For new: consult Emerson BOM or contact Konmask.
- Budget vs. OEM: → Konmask offers tested surplus and refurbished units at competitive pricing with warranty.
Quality Assurance & Sourcing
- All units sourced through verified industrial automation supply channels
- Pre-shipment functional inspection and visual QC performed
- OEM units include original Emerson labeling and serialization
- Refurbished units cleaned, tested, and re-certified to OEM specification
- Anti-static packaging with humidity indicators for safe transit
- 90-day warranty on all units; extended warranty available on request
How to Order
- Online: Add to cart directly from this page — stock availability shown in real time
- Email RFQ: [email protected] — include part number, quantity, and required delivery date
- Phone/WhatsApp: +0086 19859288691 — available for urgent sourcing inquiries
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
- Payment: T/T, PayPal, credit card, and trade terms available for qualified buyers
Replacement & Compatibility FAQ
Q: Can KJ3241X1-BA1 replace CE4006P2 directly?
A: Yes — KJ3241X1-BA1 is an alternate OEM part number for the same card. They are functionally identical.
Q: Is 12P2506X102 the same as CE4006P2?
A: 12P2506X102 is an Emerson internal reference/revision code associated with this card family. Confirm with your system documentation before ordering.
Q: Can I use a non-redundant card as a temporary replacement?
A: Functionally possible in some configurations, but redundancy will be lost. Not recommended for critical process loops.
Q: Do you offer testing before shipment?
A: Yes. All units undergo pre-shipment functional checks. Test reports available on request for refurbished units.
Q: What warranty do you provide?
A: Standard 90-day warranty. Extended 12-month warranty available — contact us for terms.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
