GE DS200TCCAG1AHB Analog I/O Board | Replacement, Equivalent & Selection Guide
The GE DS200TCCAG1AHB is a high-precision Analog I/O Board designed for use in General Electric Mark V Turbine Control Systems. This board handles critical analog signal conditioning, input/output interfacing, and real-time process data acquisition in gas turbine, steam turbine, and combined-cycle power generation applications. Whether you are sourcing an original unit, evaluating a compatible replacement, or selecting an equivalent model for a system upgrade, this guide provides the technical detail you need.
Technical Specifications
- Part Number: DS200TCCAG1AHB
- Manufacturer: General Electric (GE)
- Series: DS200 / Mark V Turbine Control
- Board Type: Analog I/O Board
- Function: Analog signal input/output conditioning and interfacing
- Signal Types: 4–20 mA, 0–10 V DC analog inputs and outputs
- Form Factor: PCB module, rack-mountable
- Weight: Approx. 980 g
- Operating Environment: Industrial — suitable for power plant control room environments
- Compatibility: GE Mark V Speedtronic Turbine Control System
- Condition Available: New, Refurbished, Tested & Repaired
Compatible Replacement & Equivalent Models
When the DS200TCCAG1AHB is unavailable or discontinued, the following models may serve as functional replacements or equivalents depending on your system configuration. Always verify firmware revision and slot compatibility before substitution.
- DS200TCCAG1A — Base revision; functionally equivalent in most Mark V configurations
- DS200TCCAG1BHB — Revised hardware variant; confirm I/O channel mapping before swap
- DS200TCCAG2AHB — Next-generation revision with enhanced signal isolation
- DS200TCQAG1AHB — Alternative analog I/O board used in parallel Mark V slots
- IS200TCCAH1A — Mark VIe series equivalent for system migration projects
- DS3800HAIA — Legacy analog input board used in Mark IV; not a direct drop-in, requires engineering review
Note: Replacement compatibility depends on system revision, firmware version, and application. Contact Konmask technical support for a verified cross-reference.
Why Choose the Original Model
- Exact OEM Fit: DS200TCCAG1AHB is the factory-specified board for your Mark V system — no re-engineering required
- Proven Reliability: Validated in thousands of hours of turbine control operation worldwide
- Minimal Downtime Risk: Direct swap with no firmware reconfiguration in matched-revision systems
- Traceability: Original GE part numbers ensure full audit trail for regulated power generation facilities
- Warranty & Support: Sourced units from Konmask.com include inspection reports and optional warranty coverage
Typical Applications
- Gas turbine control panels (GE Frame 5, Frame 6, Frame 7, Frame 9)
- Steam turbine Speedtronic Mark V control systems
- Combined-cycle power plant DCS integration
- Compressor station automation and monitoring
- Industrial process control requiring high-accuracy analog I/O
- Retrofit and life-extension projects for aging Mark V installations
System Compatibility
- Primary System: GE Speedtronic Mark V Turbine Control
-
Compatible Racks: Mark V ,
, controller racks - Communication Bus: Mark V internal I/O bus
- Migration Path: Compatible with Mark VIe migration kits via IS200-series adapter boards
- Not Compatible With: Mark IV (DS3800 series) without hardware adaptation; Mark VI without engineering review
Selection Guide
Use the following criteria to select the correct analog I/O board for your application:
- Step 1 — Confirm System Generation: Identify whether your turbine control is Mark IV, Mark V, or Mark VIe. DS200TCCAG1AHB is Mark V only.
- Step 2 — Verify Slot Position: Check the rack slot designation in your Mark V system drawing. TCCA boards occupy specific I/O slots.
- Step 3 — Check Hardware Revision: Match the suffix (G1AHB, G1BHB, G2AHB) to your existing board revision to ensure firmware compatibility.
- Step 4 — Assess Signal Requirements: Confirm the number of analog input/output channels required matches the board’s I/O count.
- Step 5 — Evaluate Condition: For critical turbine applications, specify tested & refurbished or new surplus condition. Konmask provides full test reports on request.
Quality Assurance & Sourcing
- All DS200TCCAG1AHB units sourced by Konmask.com undergo visual inspection, functional bench testing, and cleaning prior to shipment
- Units are stored in ESD-safe packaging in climate-controlled warehouses
- Traceability documentation available upon request (test reports, photos, serial number records)
- Sourced from verified industrial surplus, OEM overstock, and decommissioned plant inventories
- Export compliance reviewed for all international shipments
How to Order
- Online: Add to cart directly on this page — stock is updated in real time
- Email RFQ: Send part number, quantity, and required condition to support@konmask.com
- Phone/WhatsApp: +0086 19859288691 — technical sales team available Mon–Sat, 9:00–18:00 CST
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
- Payment: T/T bank transfer, PayPal, credit card, and trade assurance accepted
- Shipping: DHL, FedEx, UPS express worldwide; sea freight available for bulk orders
Replacement & Compatibility FAQ
Q: Can DS200TCCAG1AHB replace DS200TCCAG1A directly?
A: In most Mark V systems, yes — the HB suffix denotes a hardware build variant. Verify the PCB revision matches your system’s expected board before powering up.
Q: Is this board compatible with Mark VIe systems?
A: Not directly. Mark VIe uses the IS200 series. However, migration adapter kits exist — contact us for engineering guidance.
Q: Do you provide a warranty on refurbished units?
A: Yes. Konmask offers a 90-day tested warranty on refurbished boards, with optional extended coverage. Full test reports are included.
Q: Can I send my faulty board for repair?
A: Yes. We offer board-level repair services. Contact support@konmask.com with your board condition and fault description for a repair quote.
Q: What is the lead time for new surplus units?
A: New surplus DS200TCCAG1AHB units typically ship within 1–3 business days when in stock. Sourced units require 5–15 business days.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


