GE IC600BF910 / IC600FP910K / IC600BF910K Output Module | Replacement, Equivalent & Selection Guide
The GE IC600BF910 (also known as IC600FP910K and IC600BF910K) is a discrete output module designed for the GE Series Six PLC platform. Engineered for industrial automation environments, this module delivers reliable digital output control for machinery, process lines, and plant-wide control systems. Whether you are sourcing an original unit, seeking a compatible replacement, or evaluating equivalent alternatives, this guide provides the technical detail and selection criteria you need.
Technical Specifications
- Part Numbers: IC600BF910 / IC600FP910K / IC600BF910K
- Manufacturer: General Electric (GE Automation / GE Fanuc)
- Module Type: Discrete Output Module
- Platform: GE Series Six PLC
- Output Type: Relay / Solid-State (verify with your system documentation)
- Weight: 860 g
- Housing: Standard Series Six rack-mount form factor
- Operating Environment: Industrial — suitable for panel and rack installation
- Compliance: Designed to GE Fanuc Series Six system standards
Note: Full electrical specifications (voltage range, current rating, isolation class) should be confirmed against the GE Series Six hardware reference manual for your specific revision.
Compatible Replacement & Equivalent Models
The following part numbers are functionally equivalent or directly interchangeable with the IC600BF910 in most Series Six configurations:
- IC600BF910 — Base part number (standard revision)
- IC600FP910K — Field-programmable variant; same output functionality
- IC600BF910K — Revised suffix; electrically equivalent to IC600BF910
When sourcing a replacement, confirm the rack slot type, backplane connector revision, and firmware compatibility with your Series Six CPU before installation. Contact support@konmask.com if you need cross-reference assistance.
Why Choose the Original Model
- Guaranteed Compatibility: Drop-in fit for existing GE Series Six racks — no re-engineering required.
- Proven Reliability: GE Fanuc Series Six modules are field-tested across decades of industrial deployment.
- Reduced Downtime Risk: Using the OEM part eliminates firmware mismatch and connector incompatibility risks common with generic substitutes.
- Traceability: Original modules carry manufacturer traceability, supporting ISO and audit requirements.
- Long-Term Spares Strategy: Stocking original modules protects aging Series Six installations against obsolescence-driven downtime.
Typical Applications
- Discrete output control for motors, solenoids, and actuators in manufacturing lines
- Process plant automation — chemical, petrochemical, and utilities
- Material handling and conveyor control systems
- Packaging machinery and assembly line automation
- Water and wastewater treatment plant control panels
- Legacy plant modernization projects retaining Series Six infrastructure
System Compatibility
- PLC Platform: GE Series Six (Series 6) PLC system
- Rack Compatibility: Standard GE Series Six I/O racks
- CPU Compatibility: Compatible with Series Six CPU modules (verify firmware revision)
- Programming Software: Logicmaster 6 (LM6) and compatible Series Six programming environments
- Not Compatible With: GE Series 90-30, Series 90-70, PACSystems RX3i/RX7i (different backplane and I/O bus architecture)
Selection Guide
Use the following criteria to confirm this module is the correct choice for your application:
- Step 1 — Verify Platform: Confirm your PLC is a GE Series Six system. Check the rack label and CPU module markings.
- Step 2 — Check Slot Type: Confirm the target rack slot accepts a BF/FP-series output module.
- Step 3 — Output Requirements: Match the output type (relay vs. solid-state), voltage range, and current rating to your field device requirements.
- Step 4 — Part Number Suffix: IC600BF910, IC600BF910K, and IC600FP910K are interchangeable in most applications — confirm with your system integrator if unsure.
- Step 5 — Quantity & Spares: For critical systems, consider ordering one spare unit per active module to support rapid swap-out during unplanned downtime.
Not sure which variant you need? Email support@konmask.com with your rack model and current module label — we will confirm compatibility before you order.
Quality Assurance & Sourcing
- Source: Konmask.com sources GE Series Six modules from verified industrial surplus and authorized distribution channels.
- Inspection: Each unit undergoes visual and functional pre-shipment inspection.
- Condition: Units are clearly described as new, refurbished, or tested-surplus — no misrepresentation.
- Packaging: Anti-static packaging with secure outer carton for international shipping.
- Documentation: Certificate of conformance and test records available on request.
How to Order
- Click Add to Cart or Buy Now on this page.
- For bulk orders (5+ units), contact us directly for volume pricing: support@konmask.com
- For urgent requirements, call or WhatsApp: +0086 19859288691
- Lead time and stock availability confirmed within 1 business day of inquiry.
- International shipping available — DHL, FedEx, UPS, and sea freight options.
Replacement & Compatibility FAQ
Q: Is IC600FP910K a direct replacement for IC600BF910?
A: Yes. In the vast majority of Series Six installations, IC600FP910K and IC600BF910 are electrically and mechanically interchangeable. Confirm firmware revision compatibility with your system documentation.
Q: Can I use this module in a GE Series 90-30 rack?
A: No. The Series Six backplane and I/O bus are not compatible with Series 90-30, 90-70, or PACSystems hardware. This module is exclusively for GE Series Six racks.
Q: What is the difference between IC600BF910 and IC600BF910K?
A: The “K” suffix typically denotes a revised or updated production run. Functionally, both are output modules for the same platform and are interchangeable in standard applications.
Q: Do you provide a warranty?
A: Yes. Konmask.com provides a limited warranty on all shipped units. Contact support for warranty terms applicable to your order.
Q: Can you source other GE Series Six modules?
A: Yes. We stock a range of GE Series Six I/O, CPU, and power supply modules. Contact us with your full BOM for availability and pricing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
