GE IS200GGXIG1AED Control PCB Board | Replacement, Equivalent & Selection Guide
The GE IS200GGXIG1AED is a Control PCB Board designed for use in GE Mark VI turbine control systems. This board plays a critical role in signal processing and I/O management within gas and steam turbine automation architectures. Konmask.com supplies both original GE units and verified compatible equivalents to support your maintenance and upgrade requirements.
Technical Specifications
- Part Number: IS200GGXIG1AED
- Manufacturer: GE (General Electric)
- Series: Mark VI Turbine Control System
- Board Type: Control PCB Board
- Form Factor: VME / Rack-mount PCB
- Application: Gas turbine, steam turbine, generator control
- Weight: 890 g (approx.)
- Condition Available: New, Refurbished, Tested
Compatible Replacement & Equivalent Models
When the original IS200GGXIG1AED is unavailable or cost-prohibitive, the following models may serve as functional equivalents depending on your system revision and firmware version. Always verify compatibility with your system integrator before substitution.
- IS200GGXIG1AAA – Earlier revision; functionally equivalent in most Mark VI configurations
- IS200GGXIG1ABB – Mid-series revision with minor firmware differences
- IS200GGXIG1ACC – Intermediate revision; confirm I/O mapping before use
- IS200GGXIG1ABA – Compatible in select Mark VI panel configurations
- IS200GGXIG1ACA – Verify rack slot and backplane compatibility
Note: Revision suffixes (e.g., AED vs. AAA) may indicate hardware or firmware differences. Contact Konmask technical support to confirm cross-compatibility for your specific system build.
Why Choose the Original IS200GGXIG1AED
- ✅ Factory-validated for GE Mark VI turbine control panels
- ✅ Guaranteed firmware and hardware revision match
- ✅ Minimizes risk of I/O mapping errors or communication faults
- ✅ Supported by GE Speedtronic service documentation
- ✅ Preferred for critical turbine protection and trip logic circuits
Typical Applications
- Gas turbine control panels (Frame 5, Frame 6, Frame 7, Frame 9)
- Steam turbine governor and protection systems
- Combined-cycle power plant automation
- Compressor station control upgrades
- Industrial generator set management
- Retrofit and modernization of legacy Speedtronic Mark V to Mark VI migrations
System Compatibility
- Control Platform: GE Mark VI Turbine Control System
- Panel Types: VCMI, VTUR, VPRO, VSVO rack configurations
- Communication: IONet Ethernet-based I/O network
- Software: Compatible with GE ToolboxST configuration environment
- Backplane: Standard Mark VI VME backplane
Selection Guide
Use the following criteria to select the correct board for your application:
- Step 1 – Identify your Mark VI panel type (VCMI / VTUR / VPRO / VSVO)
- Step 2 – Confirm the revision suffix on your existing board label (e.g., AED)
- Step 3 – Check ToolboxST configuration for assigned I/O module slot and signal list
- Step 4 – Verify firmware version compatibility if substituting with an alternate revision
- Step 5 – Contact Konmask with your panel serial number for a confirmed match
If you are unsure which revision is required, provide your turbine frame type and panel serial number to support@konmask.com for a free pre-sales compatibility check.
Quality Assurance & Sourcing
- All units are inspected and tested prior to shipment
- Sourced from authorized distributors, OEM surplus, and certified refurbishers
- Each board ships with a test report and 12-month warranty (new units)
- Refurbished units include full functional test documentation
- Anti-static packaging with humidity indicator cards for safe transit
- Traceable lot documentation available on request
How to Order
- Add IS200GGXIG1AED to cart and proceed to checkout, or
- Email support@konmask.com with your PO or RFQ, or
- Call / WhatsApp: +0086 19859288691 for urgent requirements
- Specify required condition: New / Refurbished / Exchange
- Provide delivery address for accurate freight quotation
Bulk orders and long-term supply agreements are welcome. Lead time for in-stock units: 1–3 business days. Ex-stock shipment via DHL / FedEx / UPS.
Replacement & Compatibility FAQ
Q: Can IS200GGXIG1AAA replace IS200GGXIG1AED?
A: In many Mark VI configurations, yes — but firmware revision differences may require a ToolboxST reconfiguration. Confirm with your controls engineer before installation.
Q: Is this board compatible with Mark V systems?
A: No. The IS200GGXIG1AED is designed exclusively for the Mark VI platform. Mark V uses a different backplane and I/O architecture.
Q: Do you offer exchange / repair services?
A: Yes. Send your faulty board to us for evaluation. We offer repair-and-return or advance exchange programs. Contact us for details.
Q: What is the lead time for a new unit?
A: In-stock units ship within 1–3 business days. For out-of-stock items, typical lead time is 2–4 weeks depending on sourcing.
Q: Can I get a certificate of conformance (CoC)?
A: Yes. CoC and test reports are available upon request for all new and refurbished units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
