GE IS200TSVCH1ACB Servo Terminal Board | Replacement, Equivalent & Selection Guide
The GE IS200TSVCH1ACB is a Servo Terminal Board designed for use in GE’s Mark VI Turbine Control System. It provides the critical interface between the servo amplifier and the turbine’s hydraulic actuators, ensuring precise, reliable control of fuel valves and inlet guide vanes. This page covers full technical specifications, compatible replacement options, equivalent models, and a structured selection guide to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
- Part Number: IS200TSVCH1ACB
- Manufacturer: GE (General Electric)
- Series: Mark VI Turbine Control
- Board Type: Servo Terminal Board
- Function: Servo amplifier interface for hydraulic actuator control
- Mounting: DIN rail / panel mount (Mark VI rack compatible)
- Communication: Integrated with Mark VI I/O bus
- Operating Temperature: 0°C to 60°C
- Power Supply: 28 VDC (via Mark VI backplane)
- Channels: Multiple servo output channels (refer to GE Mark VI documentation for channel count)
- Compliance: CE, UL listed (per GE Mark VI system certification)
- Weight: Approx. 500 g
- Condition Available: New, Refurbished, Tested
Compatible Replacement & Equivalent Models
When the IS200TSVCH1ACB is unavailable or requires substitution, the following models are commonly evaluated as replacements. Always verify firmware revision and hardware revision compatibility before substitution.
- IS200TSVCH1A – Base revision; functionally equivalent in most Mark VI configurations
- IS200TSVCH1ABB – Alternate revision B; check backplane connector pinout compatibility
- IS200TSVCH1ACC – Revision C; may include minor firmware updates
- IS200TSVCH2A – Second-generation variant; confirm I/O mapping before substitution
- IS215TSVCH1A – Mark VIe compatible variant; requires system-level compatibility check
Note: Revision suffixes (A, B, C) may affect firmware compatibility. Consult GE Mark VI system documentation or contact Konmask for pre-sales compatibility verification.
Why Choose the Original Model
- Guaranteed Compatibility: IS200TSVCH1ACB is factory-validated for Mark VI turbine control racks — no re-engineering required.
- Firmware Alignment: Revision ACB matches specific Mark VI firmware builds, reducing commissioning risk.
- OEM Traceability: Original GE part with full documentation and certification trail.
- Reduced Downtime Risk: Plug-and-play replacement minimizes turbine outage duration.
- Long-Term Support: Konmask maintains stock of legacy GE Mark VI boards to support aging fleets.
Typical Applications
- Gas turbine fuel valve servo control (GE Frame 5, 6, 7, 9 series)
- Steam turbine governor valve actuation
- Inlet guide vane (IGV) positioning control
- Combined cycle power plant turbine control upgrades
- Compressor anti-surge valve control
- Industrial turbine retrofit and modernization projects
System Compatibility
| Control System | Compatible | Notes |
|---|---|---|
| GE Mark VI | ✅ Yes | Primary target platform |
| GE Mark VIe | ⚠️ Verify | Use IS215TSVCH1A for native VIe support |
| GE Mark V | ❌ No | Different backplane architecture |
| GE Mark IV | ❌ No | Incompatible I/O bus |
| Third-party DCS | ❌ No | GE proprietary bus; not interoperable |
Selection Guide
Use the following decision flow to select the correct servo terminal board for your application:
- Identify your control system: Confirm Mark VI vs. Mark VIe — these use different board families.
- Check existing revision: Match the revision suffix (ACB) to your current installed board to avoid firmware mismatch.
- Verify slot position: Confirm the board occupies the correct I/O slot in the Mark VI rack (TSVCH boards are typically in the servo I/O section).
- Assess condition requirement: New OEM stock for critical applications; certified refurbished for budget-sensitive maintenance.
- Confirm lead time vs. urgency: Konmask maintains ready stock for emergency turbine outage support — contact us for same-day quotation.
Quality Assurance & Sourcing
- Source: Authorized surplus, OEM-certified channels, and tested refurbished stock
- Testing: All boards undergo functional bench testing prior to shipment
- Packaging: ESD-safe anti-static packaging with foam cushioning
- Documentation: Certificate of conformance and test report available on request
- Warranty: 12-month warranty on all units (terms apply)
- Traceability: Full lot traceability maintained for compliance and audit purposes
How to Order
- Add the IS200TSVCH1ACB to your cart and proceed to checkout, or
- Contact us directly for bulk orders, urgent requirements, or custom sourcing:
📧 support@konmask.com
📞 +0086 19859288691 - Provide your PO number, required quantity, and delivery timeline for a formal quotation.
- We offer DDP, DAP, and EXW shipping terms — specify your preference at inquiry.
Replacement & Compatibility FAQ
Q: Can IS200TSVCH1ACB replace IS200TSVCH1A directly?
A: In most Mark VI configurations, yes. However, verify the firmware revision loaded on your Mark VI controller matches the ACB hardware revision. Contact GE or Konmask for revision compatibility matrices.
Q: Is a refurbished IS200TSVCH1ACB safe for turbine control?
A: Yes, when sourced from a reputable supplier with documented testing. Konmask provides full functional test reports and a 12-month warranty on all refurbished units.
Q: What is the lead time for a new OEM IS200TSVCH1ACB?
A: New OEM units may have 8–16 week lead times. Konmask typically maintains surplus stock for immediate shipment — contact us to confirm current availability.
Q: Can this board be used in a Mark VIe system?
A: The IS200TSVCH1ACB is designed for Mark VI. For Mark VIe, the IS215TSVCH1A is the recommended equivalent. Cross-platform use requires engineering validation.
Q: Do you provide installation support?
A: Konmask provides technical documentation and pre-sales consultation. For on-site commissioning, we can refer certified GE Mark VI service partners.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


