Distributed I/O Solution – GE IC200PBI001 | VersaMax Remote Series
Where This Product Is Used
The GE IC200PBI001 VersaMax Remote I/O module is deployed wherever engineers need to extend a Profibus DP network to remote field devices without running long home-run wiring back to a central rack. Typical installation environments include:
- Automotive assembly lines — distributed I/O nodes on conveyor and welding cells controlled by a central GE PACSystems or Series 90 PLC
- Oil & gas wellhead and pipeline stations — remote terminal units (RTUs) requiring rugged, DIN-rail-mounted I/O in hazardous-area marshalling cabinets
- Water & wastewater treatment plants — pump station remote I/O linked to SCADA via Profibus DP at up to 12 Mbps
- Food & beverage processing — hygienic-area panels where distributed I/O reduces cabinet footprint and simplifies cable management
- Pharmaceutical batch manufacturing — validated control architectures requiring deterministic fieldbus communication
- Power generation & utilities — substation automation panels integrating legacy GE VersaMax I/O with modern DCS platforms
- Material handling & logistics — sorter and palletizer systems with distributed sensor/actuator nodes across long conveyor runs
Technical Specifications
| Part Number | IC200PBI001 |
| Series | GE VersaMax Remote I/O |
| Communication Protocol | Profibus DP (EN 50170 / IEC 61158) |
| Baud Rate | 9.6 kbps – 12 Mbps (auto-detect) |
| Node Address | 0 – 125 (DIP-switch configurable) |
| Max I/O Modules per Node | Up to 8 VersaMax I/O modules |
| Supply Voltage | 24 VDC (18–30 VDC operating range) |
| Power Consumption | ≤ 3 W (module only) |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | -40 °C to +85 °C |
| Relative Humidity | 5 – 95 % non-condensing |
| Mounting | DIN rail (35 mm) or panel mount |
| Weight | 320 g |
| Dimensions (W × H × D) | Approx. 45 × 130 × 75 mm |
| Diagnostic LEDs | PWR, BUS FAULT, I/O FAULT, RUN |
| Connector Type | 9-pin D-sub (DB9) Profibus connector |
| Vendor | GE (now part of Emerson / Movicon ecosystem) |
Why Engineers Specify This Model
- Proven fieldbus reliability — Profibus DP is a deterministic, noise-immune protocol trusted in millions of industrial installations worldwide; the IC200PBI001 implements it fully per EN 50170.
- Seamless GE VersaMax ecosystem fit — snaps directly onto the VersaMax carrier rail alongside discrete, analog, and specialty I/O modules with no additional gateway hardware.
- Auto baud-rate detection — eliminates manual speed configuration; the module synchronises to the master’s baud rate on power-up, reducing commissioning time.
- Wide supply voltage tolerance — 18–30 VDC input handles real-world panel voltage sag without nuisance faults.
- Comprehensive diagnostics — four onboard LEDs plus Profibus DP diagnostic telegrams allow rapid fault isolation without a laptop on the factory floor.
- Long product lifecycle — GE VersaMax hardware has been in continuous production for over two decades; spare parts and replacements remain readily available through authorised distributors like Konmask.
Complete System Bill of Materials
A typical VersaMax remote I/O node built around the IC200PBI001 requires the following components:
- IC200PBI001 — Profibus DP slave head-end module (this item)
- IC200CHS002 / IC200CHS022 — VersaMax I/O carrier (5-slot or 10-slot)
- IC200MDL640 / IC200MDL740 — 16-point 24 VDC discrete input / output modules
- IC200ALG260 / IC200ALG320 — 4-channel analog input / output modules (4–20 mA or 0–10 V)
- IC200PWR002 — 24 VDC power supply module for the VersaMax carrier
- Profibus DP cable — shielded twisted-pair, IEC 61158 Type A (violet jacket), with DB9 connectors and termination resistors at each end of the segment
- DIN rail & enclosure — 35 mm steel DIN rail, IP54 or better enclosure for field installation
Compliance & Industry Standards
- Profibus DP protocol: EN 50170 / IEC 61158
- EMC emissions & immunity: CE Mark (EN 61000 series)
- Electrical safety: UL 508 (Industrial Control Equipment)
- RoHS compliance: Directive 2011/65/EU
- Vibration & shock: per IEC 60068-2 test methods
- Hazardous location ratings: consult GE datasheet for Class I Div 2 applicability
Quality Assurance & Sourcing
Every IC200PBI001 unit shipped by Konmask.com undergoes the following verification process:
- Visual inspection — PCB, connector pins, label legibility, and housing integrity checked against OEM reference photos
- Functional power-on test — PWR LED confirmation and Profibus DP address DIP-switch verification
- Traceability documentation — serial number, date code, and sourcing chain recorded per order
- Anti-static packaging — shipped in ESD-safe bags with foam cushioning inside double-wall cartons
- 90-day warranty — covers defects in materials and workmanship under normal operating conditions
Konmask sources GE VersaMax modules from authorised distributors, OEM surplus channels, and factory-refurbished stock. Refurbished units are clearly labelled and priced accordingly.
How to Source This Part
- Add to cart on this page and proceed to checkout — we accept T/T bank transfer, PayPal, and major credit cards.
- Request a quote for volume orders (> 5 units) or mixed BOM orders by emailing support@konmask.com with your full BOM list.
- Lead time: in-stock units ship within 1–3 business days from our Fujian warehouse; out-of-stock units typically 7–21 business days depending on sourcing channel.
- Export documentation: commercial invoice, packing list, and certificate of origin available for all international shipments. HS Code 8537.10 applies.
- Call / WhatsApp: +0086 19859288691 for urgent requirements or technical pre-sales questions.
Application-Specific FAQ
Q: Can the IC200PBI001 work with a Siemens S7 PLC as the Profibus DP master?
A: Yes. The IC200PBI001 is a standard Profibus DP slave and is compatible with any DP master that supports the GSD file for this module. The GSD file (GE_0B5E.GSD) is available from GE’s support portal.
Q: How many I/O points can one IC200PBI001 node support?
A: Up to 8 VersaMax I/O modules per carrier, supporting a maximum of 128 discrete I/O points or a mix of discrete and analog channels depending on the modules installed.
Q: Is this module suitable for use in a Class I Division 2 hazardous area?
A: The base IC200PBI001 is rated for general industrial use. For Class I Div 2 applications, consult the GE VersaMax system manual and verify with your local safety authority before installation.
Q: What is the maximum Profibus DP segment length with the IC200PBI001?
A: At 1.5 Mbps, maximum segment length is 200 m; at 93.75 kbps, up to 1,200 m. Use repeaters to extend beyond one segment.
Q: Can I mix new and refurbished IC200PBI001 units in the same system?
A: Yes. Profibus DP is protocol-based; hardware revision differences do not affect interoperability as long as the GSD file version is compatible with your master configuration.
Q: Do you provide a test report or functional verification certificate?
A: Yes, upon request for orders of 3 or more units. Contact support@konmask.com to arrange.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


