Power Generation & Heavy Industry Solution — GE IC698CPE010-JU | PACSystems RX7i
Where This Product Is Used
The GE IC698CPE010-JU is a high-performance CPU module from the PACSystems RX7i platform, engineered for mission-critical industrial environments that demand deterministic control, high-speed processing, and robust fault tolerance. Typical deployment sites include:
- Power Generation & Utilities — turbine governor control, generator protection relay coordination, substation automation (IEC 61850 environments)
- Oil & Gas — wellhead control panels, pipeline SCADA integration, compressor station automation, SIL-rated safety loops
- Petrochemical & Refining — reactor sequencing, distillation column control, emergency shutdown (ESD) system integration
- Automotive Manufacturing — body-in-white welding lines, paint shop conveyors, press transfer automation
- Water & Wastewater Treatment — pump station control, SCADA-linked remote telemetry, chemical dosing sequences
- Metals & Mining — rolling mill drives, crusher sequencing, conveyor belt management
- Discrete Manufacturing — high-speed assembly lines requiring sub-millisecond scan times and deterministic I/O response
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | GE (now Emerson / GE Vernova) |
| Part Number | IC698CPE010-JU |
| Platform | PACSystems RX7i |
| CPU Type | Celeron 300 MHz processor |
| User Memory | 10 MB program / 512 KB configurable data |
| Ethernet Ports | 1 × 10/100 Mbps (embedded, SRTP / Modbus TCP) |
| Serial Ports | 2 × RS-232 / RS-485 (configurable) |
| Backplane Compatibility | IC698CHS009 / IC698CHS017 (9-slot / 17-slot RX7i) |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | −40 °C to +85 °C |
| Humidity | 5 % to 95 % RH, non-condensing |
| Power Consumption | ≤ 13 W (from backplane) |
| Weight | Approx. 300 g |
| Firmware Revision | JU (latest validated revision) |
| Programming Software | Proficy Machine Edition (PME) 9.0+ |
| Supported Languages | Ladder Diagram, Function Block, Structured Text, IL, SFC |
Why Engineers Specify This Model
- Deterministic Scan Performance — 0.1 ms/K boolean execution speed ensures tight loop control for high-speed processes
- Embedded Ethernet — native SRTP and Modbus TCP without an additional communications module, reducing rack cost and failure points
- Backward Compatibility — supports Series 90-70 I/O migration, protecting legacy investments while modernizing the CPU layer
- Dual Serial Ports — simultaneous HMI and field device communication without additional modules
- Hot-Standby Ready — pairs with IC698CRE020 redundancy module for bumpless switchover in critical applications
- JU Firmware Revision — latest validated release with security patches and enhanced diagnostics, preferred for new installations and retrofits
- Wide Temperature Range — qualified for harsh plant-floor environments without additional enclosure conditioning
Complete System Bill of Materials
A fully operational PACSystems RX7i control system built around the IC698CPE010-JU typically includes:
| Item | Part Number | Description |
|---|---|---|
| CPU Module | IC698CPE010-JU | This unit — PACSystems RX7i CPU |
| Backplane (9-slot) | IC698CHS009 | RX7i 9-slot rack |
| Backplane (17-slot) | IC698CHS017 | RX7i 17-slot rack for large I/O counts |
| Power Supply | IC698PSA100 | 120/240 VAC input, 90 W |
| DC Power Supply | IC698PSA350 | 24 VDC input, 90 W |
| Discrete Input | IC698MDL140 | 120 VAC, 16-point input module |
| Discrete Output | IC698MDL740 | 120/240 VAC, 12-point relay output |
| Analog Input | IC698ALG230 | 16-channel ±10 V / 4–20 mA analog input |
| Analog Output | IC698ALG728 | 8-channel analog output |
| Redundancy Module | IC698CRE020 | Hot-standby CPU redundancy |
| Programming Cable | IC690ACC901 | RS-232 serial programming cable |
Compliance & Industry Standards
- CE Marking — EMC Directive 2014/30/EU; Low Voltage Directive 2014/35/EU
- UL Listed — UL 508 (Industrial Control Equipment)
- cUL — CSA C22.2 No. 142 (Process Control Equipment)
- RoHS — Directive 2011/65/EU compliant
- IEC 61131-3 — compliant programming environment via Proficy Machine Edition
- ATEX / IECEx — suitable for use in Zone 2 classified areas when installed in appropriate certified enclosures
- IEEE 1613 — communications networking devices in electric power substations (applicable configurations)
Quality Assurance & Sourcing
Konmask.com sources the IC698CPE010-JU through verified industrial distribution channels with full traceability:
- ✅ Authenticity Verified — each unit inspected against GE/Emerson factory markings, label integrity, and firmware revision confirmation
- ✅ Functional Test — power-on and communication port verification prior to shipment
- ✅ Anti-Counterfeit Screening — PCB date codes, component markings, and housing tolerances cross-checked against known-good reference units
- ✅ Condition Grading — clearly stated: New Surplus, Refurbished (Grade A), or Used-Tested; no misrepresentation
- ✅ Traceability Documentation — chain-of-custody records available on request for regulated industries
- ✅ Warranty — 12-month replacement warranty against defects in materials and workmanship
How to Source This Part
- Add to Cart — select quantity and proceed to checkout directly on this page
- Request a Quote — for orders of 2+ units, email support@konmask.com for volume pricing
- Urgent Requirement — call or WhatsApp +0086 19859288691 for same-day stock confirmation and expedited shipping options
- Datasheet / Compliance Docs — available upon request; specify your application and we will provide the relevant GE/Emerson documentation package
- Export & Cross-Border Orders — we ship internationally; contact us for HS code confirmation (HS 8537.10), export licensing, and freight options (DHL / FedEx / sea freight)
Application-Specific FAQ
Q: Is the IC698CPE010-JU compatible with my existing Series 90-70 I/O modules?
A: Yes. The PACSystems RX7i backplane accepts legacy Series 90-70 I/O modules alongside native RX7i modules, enabling phased migration without replacing field wiring.
Q: Can this CPU be used in a redundant (hot-standby) configuration?
A: Yes. Pair two IC698CPE010-JU units with the IC698CRE020 redundancy module and a fiber-optic sync cable for bumpless switchover with <1 scan-cycle transfer time.
Q: What programming software is required?
A: GE Proficy Machine Edition (PME) version 9.0 or later. PME supports all five IEC 61131-3 languages and includes online editing and diagnostics.
Q: What is the difference between firmware revisions (e.g., -EF vs -JU)?
A: The suffix denotes the factory firmware revision. JU is the latest validated release and is recommended for all new installations. Earlier revisions can typically be upgraded via PME firmware download.
Q: Is this unit suitable for SIL-rated safety applications?
A: The standard IC698CPE010-JU is not SIL-certified. For functional safety applications, GE offers the PACSystems RSTi-EP Safety CPU. Contact us to discuss your SIL requirements.
Q: What is the lead time for international shipments?
A: In-stock units ship within 1–2 business days. International delivery via DHL Express is typically 3–7 business days depending on destination and customs clearance.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


