Genuine BENTLY NEVADA JNJ5300-08-03-000-060-10-00-00-03 Position Sensor | 3300 Series – Verified Source
The BENTLY NEVADA JNJ5300-08-03-000-060-10-00-00-03 is a precision eddy-current position sensor within the industry-standard 3300 Series platform — a product line that has defined vibration and position monitoring in rotating machinery for decades. Due to its critical role in turbine protection, compressor monitoring, and high-value rotating equipment, this model is among the most counterfeited and misrepresented industrial sensors on the global market. Counterfeit or refurbished units sold as new pose serious risks: undetected shaft displacement, false trip signals, and catastrophic machinery failure. Sourcing from unverified channels is a risk no plant engineer or procurement manager can afford.
At Konmask, every BENTLY NEVADA unit we supply undergoes a documented verification workflow before it leaves our facility. We source exclusively through authorized distribution channels and maintain full traceability from manufacturer to end customer. Our listings carry genuine, verified, and authentic as operational commitments — not marketing language. Each shipment is accompanied by documentation that lets you confirm authenticity independently, giving your engineering and QA teams the confidence they need before installation.
Technical Specifications
- Manufacturer: BENTLY NEVADA (Baker Hughes)
- Part Number: JNJ5300-08-03-000-060-10-00-00-03
- Series: 3300 XL / JNJ5300
- Sensor Type: Eddy-Current Non-Contact Position Sensor
- Probe Diameter: 8 mm
- Cable Length: 3 m (integral cable)
- Linear Range: 0–60 mil (0–1.524 mm)
- Sensitivity: 200 mV/mil (7.87 V/mm) nominal
- Operating Temperature: −35°C to +177°C (probe); −35°C to +66°C (extension cable)
- Supply Voltage: −24 VDC (via Proximitor/Seismic Monitor)
- Output Signal: DC voltage proportional to gap distance
- Target Material Compatibility: AISI 4140 steel (standard); other ferromagnetic alloys per application
- Ingress Protection: IP67 (probe assembly)
- Connector Type: Integral coaxial, compatible with 3300 XL extension cables
- Agency Approvals: CE, ATEX, IECEx (zone-specific configurations)
- Weight: Approx. 150 g
Specifications verified against BENTLY NEVADA official documentation (3300 XL 8 mm Proximity Transducer System, GEA-19140D).
Our 4-Step Quality Verification Process
- Step 1 — Source Traceability Audit: Every unit is traced to its original manufacturer lot. We verify purchase records, packing lists, and country-of-origin declarations against BENTLY NEVADA’s authorized distribution network before acceptance into our inventory.
- Step 2 — Physical Authenticity Inspection: Our QC technicians perform a detailed visual and dimensional inspection: label printing quality, holographic markings, connector finish, cable jacket material, and probe tip geometry — all cross-referenced against genuine reference samples.
- Step 3 — Functional Bench Test: Each sensor is bench-tested using a calibrated gap simulation rig. Output voltage linearity, sensitivity (mV/mil), and zero-gap response are measured and logged. Units that deviate beyond ±2% of nominal specification are rejected.
- Step 4 — Documentation Package Assembly: Passing units are packaged with a Certificate of Conformance (COC), functional test report, packing list, and COO Declaration. High-value orders may also include photographic evidence of the unit tested.
Key Features & Benefits
- Non-Contact Measurement: Eddy-current technology eliminates mechanical wear, delivering continuous position feedback with zero contact force on the target shaft — critical for high-speed rotating machinery per API 670 5th Edition requirements.
- High Linearity Output: ±1% linearity across the full 60 mil range ensures accurate shaft position data for axial displacement and differential expansion monitoring.
- Wide Temperature Tolerance: Probe-rated to +177°C, enabling deployment in hot-section turbine environments without signal degradation.
- Direct System Compatibility: Plug-and-play integration with BENTLY NEVADA 3300 XL Proximitor monitors, eliminating recalibration overhead during replacement.
- Robust IP67 Sealing: Probe assembly withstands oil mist, coolant splash, and high-humidity environments common in compressor and turbine halls.
- Full Documentation Traceability: Supplied with COC and test report, supporting IEC 61511 functional safety documentation requirements for SIL-rated protection loops.
Typical Applications
- Gas Turbines: Axial thrust position monitoring on GE, Siemens, and Solar turbine frames to detect rotor-to-stator contact risk.
- Steam Turbines: Differential expansion measurement on HP/LP turbine shafts in power generation plants.
- Centrifugal Compressors: Radial shaft position monitoring in oil & gas processing trains (API 670 compliant installations).
- Reciprocating Compressors: Rider band wear and piston rod drop monitoring in petrochemical facilities.
- Pumps & Fans: Thrust bearing wear detection on large BFW pumps and induced-draft fans in power plants.
- Test Rigs & OEM Assembly: High-precision gap measurement in rotating machinery test cells and OEM factory acceptance testing.
Compatible System Components
- BENTLY NEVADA 3300 XL Extension Cable (3 m, 5 m, 9 m options)
- BENTLY NEVADA 3300 XL Proximitor Seismic Monitor (330180 series)
- BENTLY NEVADA 3500/42M Proximitor/Seismic Monitor Module
- BENTLY NEVADA 3500/40M Proximitor/Seismic Monitor Module
- BENTLY NEVADA TK-3 Calibration Fixture (for field verification)
- Standard RG-58 coaxial interconnect cabling (50 Ω)
Global Sourcing & Shipping Capabilities
- Primary Service Regions: Mainland China, Southeast Asia (Singapore, Malaysia, Thailand, Vietnam), Middle East (UAE, Saudi Arabia, Qatar), Europe (Germany, Netherlands, UK), and North America.
- Packaging Standard: Anti-static foam insert, moisture-barrier bag, rigid outer carton with shock-absorbing liner. Probe tip protected by factory end cap.
- Export Documentation: Commercial invoice, packing list, COO Declaration, and COC included as standard. FORM E / EUR.1 available on request for applicable trade corridors.
- Logistics: DHL Express, FedEx International Priority, and sea freight consolidation available. Typical air freight transit: 3–7 business days to most destinations.
- Lead Time: In-stock units ship within 1–2 business days of order confirmation. Ex-stock availability confirmed at inquiry stage.
Certifications & Compliance Statement
- CE Marking (EMC Directive 2014/30/EU)
- ATEX Directive 2014/34/EU (zone-specific configurations)
- IECEx Certification (IEC 60079 series)
- RoHS Compliant (Directive 2011/65/EU)
- API 670 5th Edition Compatible (Machinery Protection Systems)
Konmask Quality Commitment: All BENTLY NEVADA products supplied by Konmask are sourced through verified channels and accompanied by a Certificate of Conformance. We do not knowingly supply counterfeit, refurbished-as-new, or specification-deviant product. Any unit that fails post-delivery inspection will be replaced or refunded under our authenticity guarantee policy. We stand behind every shipment with full documentation transparency.
How to Order
- Step 1 — Submit Inquiry: Contact us via the product page, email support@konmask.com, or WhatsApp/WeChat with your part number, required quantity, and destination country. We respond within 24 hours on business days.
- Step 2 — Receive Quotation & Stock Confirmation: We confirm availability, lead time, unit price, and shipping options. A proforma invoice is issued upon agreement.
- Step 3 — Order Confirmation & Shipment: Payment confirmed → unit inspected and documented → shipped with full documentation package. Tracking number provided same day as dispatch.
Sample Policy: Single-unit samples available for qualified buyers. Test reports and COC can be shared prior to order for high-value or repeat procurement decisions. Contact us to arrange.
Authenticity & Trust FAQ
-
Q: How can I verify the unit I receive is genuine BENTLY NEVADA?
A: Every unit ships with a Certificate of Conformance and functional test report. The COC includes our company details, the part number, serial/lot reference, and test results. You may also request pre-shipment photos of the physical unit, label, and packaging. BENTLY NEVADA authorized service centers can perform independent verification if required. -
Q: What is your warranty policy on this product?
A: We offer a 12-month warranty against manufacturing defects from the date of shipment. If a unit is found to be non-genuine or fails to meet published specifications upon receipt, we will replace it or issue a full refund — no dispute required. Our authenticity guarantee is unconditional. -
Q: Can you provide a test report before I place an order?
A: Yes. For qualified buyers and repeat procurement decisions, we can share a sample test report format and, where available, the specific test data for the batch in stock. Contact support@konmask.com with your inquiry and we will respond within 24 hours.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
