HIRSCHMANN MM2-2FLM4 Media Module | Replacement, Equivalent & Selection Guide
The HIRSCHMANN MM2-2FLM4 is a fiber-optic media module designed for use with HIRSCHMANN’s MICE and RS series managed industrial Ethernet switches. It provides two 100 Mbps multimode fiber ports (SC duplex) for extending network reach in electrically noisy industrial environments. This page covers technical specifications, compatible replacements, equivalent models, and a structured selection guide to help engineers and procurement teams make the right sourcing decision.
Technical Specifications
- Part Number: MM2-2FLM4
- Manufacturer: HIRSCHMANN (Belden)
- Module Type: Fiber-Optic Media Module
- Fiber Type: Multimode (MM)
- Ports: 2 × 100BASE-FX (SC duplex connector)
- Data Rate: 100 Mbps Fast Ethernet
- Wavelength: 1300 nm
- Max. Transmission Distance: Up to 4 km (multimode fiber)
- Compatible Switch Series: MICE, RS20, RS30, RS40
- Operating Temperature: -40 °C to +70 °C
- Weight: Approx. 1,300 g (packaged)
- Standards: IEEE 802.3u, EN 50155
- Housing: DIN-rail compatible plug-in module
Compatible Replacement & Equivalent Models
The following models are functionally equivalent or drop-in compatible with the MM2-2FLM4 in most HIRSCHMANN switch deployments. Always verify slot compatibility and firmware version before substitution.
- HIRSCHMANN MM2-2FLM4-EEC – Extended temperature variant (-40 °C to +70 °C), same fiber spec
- HIRSCHMANN MM2-2FXM4 – Alternative SC-duplex multimode module, 100BASE-FX
- HIRSCHMANN MM2-2FLM4-PN – PROFINET-optimized variant for PN-enabled MICE switches
- HIRSCHMANN MM4-2FLM4 – 4-port version for higher-density fiber uplink requirements
- Third-party 100BASE-FX SC MM modules – Compatible with MICE/RS series if HIRSCHMANN OEM coding is not enforced by firmware
Note: Konmask.com recommends verifying module compatibility with your specific switch firmware version. Contact our technical team for pre-purchase compatibility confirmation.
Why Choose the Original Model
- Guaranteed Compatibility: Factory-coded for seamless plug-and-play with HIRSCHMANN MICE and RS series switches — no firmware workarounds required.
- Industrial-Grade Reliability: Rated for harsh environments including wide temperature ranges, vibration, and EMI-heavy installations.
- Long-Term Support: Original modules are supported by HIRSCHMANN’s firmware update cycle and technical documentation.
- Warranty Coverage: Genuine modules maintain the switch’s warranty and are accepted by HIRSCHMANN service centers.
- Traceability: Full manufacturing traceability for regulated industries (rail, energy, process automation).
Typical Applications
- Railway and rolling stock Ethernet backbone extensions
- Substation automation and power distribution networks (IEC 61850)
- Oil & gas SCADA and DCS fiber uplinks
- Factory automation and machine-to-machine (M2M) fiber segments
- Traffic management and intelligent transportation systems (ITS)
- Water treatment and utility control networks
System Compatibility
The MM2-2FLM4 is designed for use in the following HIRSCHMANN switch platforms:
- MICE Switch Series – MS20, MS30, MS4128 (verify slot type)
- RS Series – RS20, RS30, RS40 (media module slot required)
- PowerMICE Series – PM20, PM30 (confirm module bay availability)
Not compatible with HIRSCHMANN EAGLE, DRAGON, or GECKO series. Not compatible with GigaBit (1000BASE) uplink slots.
Selection Guide
Use the following criteria to determine whether the MM2-2FLM4 is the right module for your application:
- Fiber type needed: Multimode (MM) → MM2-2FLM4 ✓ | Single-mode (SM) → consider MM2-2FLS4 or MM2-2FLS15
- Distance requirement: ≤ 4 km → MM2-2FLM4 ✓ | > 4 km → single-mode variant required
- Port count: 2 ports → MM2-2FLM4 ✓ | 4 ports → MM4-2FLM4
- Speed requirement: 100 Mbps → MM2-2FLM4 ✓ | 1 Gbps → Gigabit media module required
- Temperature range: Standard industrial → MM2-2FLM4 ✓ | Extended/rail → MM2-2FLM4-EEC
- Protocol: Standard Ethernet → MM2-2FLM4 ✓ | PROFINET → MM2-2FLM4-PN
Quality Assurance & Sourcing
- Genuine OEM Stock: Konmask.com sources MM2-2FLM4 modules directly from authorized HIRSCHMANN distributors and verified industrial surplus channels.
- Pre-shipment Testing: All modules are inspected and function-tested prior to dispatch.
- Anti-Counterfeit Verification: Serial number and label authenticity checked against HIRSCHMANN’s product database where applicable.
- Packaging: ESD-safe packaging with original or equivalent protective materials.
- Documentation: Datasheet, declaration of conformity, and test report available upon request.
How to Order
- Step 1: Confirm your switch model and available media module slot type.
- Step 2: Select quantity and add to cart, or contact us for bulk/project pricing.
- Step 3: Provide your PO number or project reference for B2B invoicing.
- Step 4: Receive order confirmation with lead time and tracking information.
For urgent requirements or large-volume procurement, email support@konmask.com or call +0086 19859288691 for a dedicated quote within 24 hours.
Replacement & Compatibility FAQ
Q: Can I use a third-party 100BASE-FX SC module instead of the MM2-2FLM4?
A: In some cases yes, but HIRSCHMANN switches may enforce OEM module coding via firmware. We recommend testing in a non-production environment first or contacting us for a pre-validated compatible alternative.
Q: Is the MM2-2FLM4 compatible with HIRSCHMANN EAGLE One routers?
A: No. The MM2-2FLM4 is a plug-in media module for MICE/RS series switches only and is not compatible with EAGLE series routers.
Q: What fiber cable type does the MM2-2FLM4 require?
A: 62.5/125 µm or 50/125 µm multimode fiber with SC connectors. Maximum distance is 4 km on 62.5/125 µm fiber.
Q: Can I mix MM2-2FLM4 and MM2-2FLS4 (single-mode) modules in the same switch?
A: Yes, MICE and RS series switches support mixed media module configurations across different slots.
Q: Do you offer a warranty on MM2-2FLM4 modules?
A: Yes. Konmask.com provides a 12-month warranty on all genuine modules and a 90-day warranty on tested surplus units. Terms available on request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
