HIRSCHMANN RPS80EEC Power Supply | Replacement, Equivalent & Selection Guide
The HIRSCHMANN RPS80EEC is an industrial-grade redundant power supply unit designed for use in Hirschmann managed switches and network infrastructure systems. This page provides full technical specifications, compatible replacement models, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
| Manufacturer | HIRSCHMANN (Belden) |
| Part Number | RPS80EEC |
| Type | Redundant Power Supply Module |
| Output Power | 80 W |
| Input Voltage | AC 100–240 V, 50/60 Hz |
| Output Voltage | DC 48 V |
| Operating Temperature | 0 °C to +60 °C |
| Protection Class | IP20 |
| Mounting | Plug-in module (chassis-dependent) |
| Weight | Approx. 1,500 g |
| Compliance | CE, UL, EEC |
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the RPS80EEC. Always verify electrical and mechanical compatibility before substitution:
- HIRSCHMANN RPS30EEC – Lower-wattage variant; suitable for lighter-load applications
- HIRSCHMANN RPS80 – Non-EEC variant; verify regulatory compliance for your region
- HIRSCHMANN MICE-RPS80EEC – MICE-series compatible redundant PSU; confirm chassis fit
- Phoenix Contact QUINT-PS/1AC/24DC/20 – Third-party DIN-rail PSU; requires output voltage adaptation
- PULS QS20.241 – Industrial PSU alternative; verify connector and form factor compatibility
Note: Konmask.com recommends using OEM parts wherever possible. Contact our team for cross-reference verification before ordering a substitute.
Why Choose the Original Model
- Guaranteed compatibility with Hirschmann MICE, RS, and MACH series switches
- Hot-swap redundancy – zero-downtime power replacement in live systems
- EEC-certified for European Energy Efficiency Compliance
- Factory-tested to Hirschmann’s industrial reliability standards
- Long service life with full OEM warranty and traceability
Typical Applications
- Industrial Ethernet switch redundant power backup (MICE, RS20/30 series)
- Factory automation network infrastructure
- Process control and SCADA communication networks
- Railway and transportation network nodes
- Harsh-environment LAN backbone power redundancy
System Compatibility
The RPS80EEC is designed for use with the following Hirschmann product families:
- MICE series managed switches (MS20, MS30, MS4128)
- RS series (RS20, RS30, RS40)
- MACH series (MACH1000, MACH4000)
- PowerMICE series
Always confirm chassis slot availability and firmware version compatibility before installation. Refer to the Hirschmann RPS80EEC datasheet or contact Konmask for pre-sales technical support.
Selection Guide
Use the following criteria to determine whether the RPS80EEC is the right choice for your system:
- Power budget: Total switch load must not exceed 80 W per PSU slot
- Redundancy requirement: Required for N+1 or dual-feed configurations
- Input supply: Confirm AC mains availability (100–240 V); DC-input variants exist separately
- Regulatory region: EEC suffix indicates European Energy Efficiency compliance — required for EU deployments
- Chassis slots: Verify your switch chassis has an available RPS slot before ordering
Quality Assurance & Sourcing
Konmask.com sources the HIRSCHMANN RPS80EEC through verified industrial distribution channels. Every unit is:
- Inspected for physical integrity and label authenticity upon receipt
- Stored in ESD-safe, climate-controlled warehousing
- Shipped with original manufacturer packaging where available
- Traceable to batch/lot documentation upon request
We supply both new OEM stock and factory-refurbished units (clearly labeled). Certificates of conformity and test reports are available for qualified B2B buyers.
How to Order
- Online: Add to cart directly from this page
- Email RFQ: [email protected] — include quantity, delivery location, and required lead time
- Phone/WhatsApp: +0086 19859288691
- Bulk / project orders: Request a formal quotation with volume pricing
- Lead time: Typically 3–7 business days for in-stock items; contact us for urgent requirements
Replacement & Compatibility FAQ
Q: Can I use the RPS80EEC in a non-Hirschmann switch?
A: No. The RPS80EEC uses a proprietary connector and form factor specific to Hirschmann chassis. It is not a universal PSU.
Q: What is the difference between RPS80EEC and RPS80?
A: The EEC suffix denotes compliance with European Energy Efficiency regulations. For EU installations, the EEC variant is required.
Q: Is the RPS80EEC hot-swappable?
A: Yes, when installed in a compatible dual-PSU chassis, the RPS80EEC supports hot-swap replacement without powering down the switch.
Q: Do you supply refurbished units?
A: Yes. Refurbished units are clearly identified in the product listing and come with a Konmask quality inspection report.
Q: Can Konmask verify compatibility with my specific switch model?
A: Yes. Send your switch model number and current firmware version to [email protected] and our technical team will confirm compatibility.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
