HONEYWELL 2MLC-E152 Extension Cable | Replacement, Equivalent & Selection Guide
The HONEYWELL 2MLC-E152 is a factory-specified Extension Cable designed for use within Honeywell’s TDC 3000 Distributed Control System (DCS) platform. Engineered to maintain signal integrity across module interconnections, this cable is a critical infrastructure component for process automation environments in oil & gas, chemical, power generation, and refining industries.
At Konmask.com, we supply both genuine OEM units and verified equivalent alternatives — helping procurement engineers source the right cable with confidence, speed, and traceability.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2MLC-E152 |
| Manufacturer | Honeywell Process Solutions |
| Product Type | Extension Cable |
| Platform | TDC 3000 / TotalPlant Solution (TPS) |
| Cable Length | 152 cm (approx. 5 ft) |
| Connector Type | OEM-specified multi-pin connector |
| Application | Module-to-module / backplane extension |
| Operating Temperature | 0°C to +60°C |
| Weight | 190 g |
| Condition Available | New / Refurbished / Tested |
Note: Full datasheet available upon request. Contact support@konmask.com for OEM documentation.
Compatible Replacement & Equivalent Models
When the OEM 2MLC-E152 is unavailable or cost-prohibitive, the following alternatives may be evaluated based on system configuration and connector compatibility:
| Model | Manufacturer | Type | Compatibility Notes |
|---|---|---|---|
| 2MLC-E076 | Honeywell | Extension Cable (shorter) | Same series, 76 cm length variant |
| 2MLC-E305 | Honeywell | Extension Cable (longer) | Same series, 305 cm length variant |
| 51109426-175 | Honeywell | Cable Assembly | TPS platform compatible; verify connector pinout |
| Custom OEM Cable | Third-party | Fabricated equivalent | Must match impedance, shielding, and connector spec |
⚠ Engineering Note: Always verify connector pinout, cable shielding specification, and signal type before substituting. Konmask engineers can assist with compatibility verification — contact us before ordering.
Why Choose the Original Model
- OEM-Certified Fit: Designed and tested specifically for TDC 3000 / TPS backplane architecture — zero integration risk.
- Signal Integrity Guaranteed: Factory-shielded construction prevents EMI interference in high-noise industrial environments.
- Plug-and-Play Replacement: No re-termination, no field modification — direct swap with existing infrastructure.
- Traceability: Full OEM part number traceability for audit, maintenance records, and regulatory compliance.
- Warranty Support: Eligible for Honeywell service and warranty coverage when sourced through authorized channels.
Typical Applications
- TDC 3000 / TPS controller module interconnection
- I/O module extension within DCS cabinets
- Backplane-to-backplane signal routing in process control panels
- Spare parts inventory for critical process automation systems
- Maintenance replacement during scheduled plant turnarounds
- Oil & gas upstream/downstream control systems
- Chemical plant DCS infrastructure upgrades
- Power generation distributed control networks
System Compatibility
| Platform | Compatibility |
|---|---|
| Honeywell TDC 3000 | ✅ Native OEM fit |
| Honeywell TPS (TotalPlant Solution) | ✅ Compatible (verify revision) |
| Honeywell Experion PKS | ⚠ Verify connector compatibility |
| Third-party DCS (ABB, Emerson, Yokogawa) | ❌ Not directly compatible |
Selection Guide
Use the following criteria to select the correct extension cable for your application:
- Step 1 — Confirm Platform: Verify your DCS is TDC 3000 or TPS. Check the existing cable label for the part number prefix 2MLC-E.
- Step 2 — Measure Required Length: 2MLC-E152 = 152 cm. If your cabinet requires a different reach, consider 2MLC-E076 (76 cm) or 2MLC-E305 (305 cm).
- Step 3 — Verify Connector Type: Confirm the connector matches the target module’s backplane interface. Request pinout diagram from Konmask if needed.
- Step 4 — Assess Condition Requirement: For critical loops, specify New OEM. For non-critical or backup systems, Refurbished/Tested units offer cost savings.
- Step 5 — Submit RFQ: Provide part number, quantity, required delivery, and condition preference to support@konmask.com.
Quality Assurance & Sourcing
- All units sourced from verified industrial surplus, OEM channels, or authorized distributors.
- Pre-shipment inspection: visual check, connector integrity, and continuity test.
- Serialized packaging with condition label (New / Refurbished / Tested-As-Is).
- Anti-static packaging for ESD-sensitive components.
- Certificate of conformance available upon request.
- Export compliance: ECCN classification and customs documentation provided for international orders.
How to Order
- Click Add to Cart or submit an RFQ via the contact form below.
- Specify: Part Number 2MLC-E152, Quantity, Required Condition, and Delivery Timeline.
- Our team will confirm availability, lead time, and pricing within 1 business day.
- Payment accepted: T/T (Wire Transfer), PayPal, and major credit cards.
- Shipping: DHL / FedEx / UPS worldwide. Export documentation included.
Replacement & Compatibility FAQ
Q: Can I use a shorter cable (2MLC-E076) in place of the 2MLC-E152?
A: Only if the physical distance between modules allows. The connector interface is identical, but insufficient cable length will prevent proper routing and may stress connectors.
Q: Is the 2MLC-E152 compatible with Experion PKS?
A: Not directly. Experion PKS uses a different backplane architecture. Contact our engineers to verify before ordering.
Q: Do you supply refurbished units?
A: Yes. All refurbished units are tested for continuity and connector integrity. Condition is clearly labeled on packaging and invoice.
Q: Can you fabricate a custom-length equivalent?
A: We can source or refer fabrication for custom cable assemblies. Provide your connector spec and required length for a quote.
Q: What is the lead time for new OEM stock?
A: Typically 3–10 business days depending on availability. Urgent requirements can be escalated — contact us directly.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
