Honeywell MLI-DR64H/D1 Digital Output Module | Replacement, Equivalent & Selection Guide
The Honeywell MLI-DR64H/D1 is a 64-channel digital output (DO) module designed for use in Honeywell’s Modular Logic Interface (MLI) series within distributed control system (DCS) architectures. It provides reliable, high-density discrete output control for industrial automation environments requiring precise field device switching.
Technical Specifications
- Part Number: MLI-DR64H/D1
- Manufacturer: Honeywell Process Solutions
- Series: MLI (Modular Logic Interface)
- Module Type: Digital Output (DO)
- Channel Count: 64 channels
- Output Type: Discrete / Digital
- Form Factor: DIN-rail / rack-mount module
- Communication: Compatible with Honeywell DCS backplane bus
- Operating Temperature: 0°C to 60°C (typical industrial range)
- Weight: Approx. 500 g
- Compliance: CE, UL (verify with official datasheet)
Note: Always verify specifications against the official Honeywell datasheet before system integration.
Compatible Replacement & Equivalent Models
When the MLI-DR64H/D1 is discontinued, unavailable, or requires a cost-effective alternative, the following models may serve as functional equivalents or drop-in replacements (subject to engineering validation):
- Honeywell MLI-DR32H/D1 – 32-channel DO variant; same MLI series, reduced channel density
- Honeywell 900DO-0001 – ControlEdge RTU digital output module; compatible in hybrid migration projects
- Honeywell CC-TDOB01 – C300 series digital output module for Experion PKS; functional equivalent in upgraded DCS environments
- Yokogawa ADV151-P00 – 32-ch DO module; cross-brand alternative for multi-vendor DCS projects
- ABB DI810 / DO810 – System 800xA discrete I/O; suitable for cross-platform migration
⚠ Important: Replacement compatibility must be validated by a qualified control systems engineer. Channel count, voltage rating, backplane interface, and firmware version must all match your system requirements.
Why Choose the Original MLI-DR64H/D1
- Native DCS Integration: Designed specifically for Honeywell MLI architecture — zero compatibility risk
- High Channel Density: 64 DO channels per module reduces cabinet footprint and wiring complexity
- Proven Reliability: Field-tested in petrochemical, power generation, and manufacturing environments
- OEM Support: Full Honeywell technical support, firmware updates, and spare parts availability
- Regulatory Compliance: Meets industrial safety and EMC standards required for critical process control
Typical Applications
- Oil & gas upstream/downstream process control
- Chemical and petrochemical plant automation
- Power generation and utilities (boiler, turbine control)
- Pulp & paper and water treatment facilities
- Pharmaceutical manufacturing (batch process control)
- Discrete output control for solenoid valves, motor starters, and relay switching
System Compatibility
- DCS Platform: Honeywell TotalPlant Solution (TPS) / TDC 3000 / Experion PKS (via MLI gateway)
- Series: MLI (Modular Logic Interface) backplane
- Controller Compatibility: Honeywell Logic Manager, HPM (High-Performance Process Manager)
- Software: Honeywell Control Builder, Universal Station (US), GUS
- I/O Bus: MLI local control network (LCN) compatible
Selection Guide
Use this guide to select the correct digital output module for your application:
- Step 1 – Channel Count: Confirm required DO channel count (32 vs. 64). Choose MLI-DR64H/D1 for high-density applications.
- Step 2 – Voltage & Load: Verify output voltage (24 VDC / 120 VAC) and maximum load current per channel.
- Step 3 – DCS Platform: Confirm your DCS is Honeywell TPS/TDC 3000 or Experion with MLI backplane support.
- Step 4 – Redundancy: Determine if redundant DO module configuration is required for SIL-rated loops.
- Step 5 – Firmware: Match firmware revision to your existing MLI system version to avoid compatibility issues.
- Step 6 – Certifications: For hazardous area installations, verify ATEX/IECEx ratings if applicable.
Quality Assurance & Sourcing
- ✅ Genuine OEM parts sourced from authorized Honeywell distributors and certified surplus channels
- ✅ Functional testing performed prior to shipment on all refurbished units
- ✅ Anti-counterfeit verification — serial number and label authentication on every unit
- ✅ Warranty: 12-month replacement warranty on all stocked units
- ✅ Packaging: ESD-safe anti-static packaging with moisture barrier for safe international shipping
How to Order
- Confirm part number: MLI-DR64H/D1
- Specify quantity and required delivery timeline
- Provide your DCS system model and firmware version for compatibility verification
- Contact us via email or phone for a formal quotation
- Orders ship within 3–7 business days (expedited options available)
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Can MLI-DR64H/D1 be used as a direct replacement for MLI-DR32H/D1?
A: No. The 64-channel variant has different backplane slot requirements. A 1:2 slot mapping or system reconfiguration is required.
Q: Is this module compatible with Experion PKS R500+?
A: MLI modules are legacy TPS/TDC 3000 components. Experion PKS integration requires an MLI Link Controller gateway. Consult Honeywell engineering for migration paths.
Q: What is the lead time for new OEM units?
A: New OEM units may have 8–16 week lead times. Konmask.com maintains certified surplus stock for immediate dispatch.
Q: Do you provide a test report with the module?
A: Yes. A functional test report is available upon request for all refurbished units.
Q: Can I return a module if it’s not compatible?
A: Yes, within 30 days of receipt, subject to our returns policy. Contact support before returning.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






