Industrial Temperature Control Solution – ICS TRIPLEX T8800 | Digital Thermostat Series
The ICS TRIPLEX T8800 Digital Thermostat is a precision industrial temperature controller engineered for demanding process environments. Designed for applications where accurate, reliable thermal regulation is mission-critical, the T8800 delivers consistent performance across oil & gas, power generation, HVAC, and advanced manufacturing facilities.
Where This Product Is Used
The T8800 is specified by engineers across a wide range of industrial sectors:
- Oil & Gas Processing: Pipeline heat tracing, wellhead temperature monitoring, and separator vessel control where precise setpoint management prevents hydrate formation and ensures flow assurance.
- Power Generation: Turbine lube oil temperature regulation, generator cooling systems, and auxiliary equipment thermal management in both gas and steam turbine plants.
- HVAC & Building Automation: Central plant chiller/boiler control loops, air handling unit discharge temperature regulation, and clean-room environmental monitoring.
- Chemical & Petrochemical Plants: Reactor jacket temperature control, heat exchanger bypass regulation, and distillation column overhead temperature management.
- Pulp, Paper & Food Processing: Dryer section temperature profiling, pasteurization loop control, and CIP (Clean-In-Place) thermal cycle management.
- Water & Wastewater Treatment: Digester heating control, sludge drying temperature regulation, and UV disinfection system thermal monitoring.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | T8800 |
| Manufacturer | ICS TRIPLEX |
| Product Type | Digital Thermostat / Temperature Controller |
| Control Mode | On/Off, PID (model-dependent) |
| Input Type | Thermocouple / RTD (PT100) |
| Output Type | Relay / Analog (4–20 mA) |
| Display | Digital LED / LCD |
| Power Supply | 85–265 VAC / 24 VDC (model-dependent) |
| Enclosure Rating | IP54 / DIN Rail Mount |
| Operating Temperature | -10°C to +55°C |
| Weight | Approx. 660 g |
| Compliance | CE, UL (verify with datasheet) |
Note: Always verify specifications against the official ICS TRIPLEX T8800 datasheet before final system design.
Why Engineers Specify This Model
- Proven Reliability: ICS TRIPLEX’s safety-system heritage translates into robust, fault-tolerant thermostat designs trusted in SIL-rated environments.
- Flexible Input Compatibility: Accepts both thermocouple and RTD inputs, reducing the need for signal conditioning hardware in mixed-sensor installations.
- DIN Rail Form Factor: Standardized mounting simplifies panel integration and reduces installation time in control cabinets.
- Wide Power Supply Range: Operates across broad AC/DC voltage ranges, making it suitable for both legacy and modern power distribution architectures.
- Intuitive Configuration: Front-panel programming with clear digital display minimizes commissioning time and reduces operator error during setpoint adjustment.
- Long Service Life: Industrial-grade components rated for continuous duty in harsh ambient conditions, reducing lifecycle maintenance costs.
Complete System Bill of Materials
For a complete temperature control loop using the T8800, engineers typically specify the following complementary components:
- Temperature Sensor: PT100 RTD or Type K/J Thermocouple (field-mount, appropriate process connection)
- Signal Cable: Shielded thermocouple extension wire or PT100 3-wire cable
- Power Supply: 24 VDC DIN rail PSU (if DC-powered variant selected)
- Output Device: SSR (Solid State Relay) or contactor for heater switching
- DIN Rail & Terminal Blocks: 35 mm DIN rail, appropriate terminal block pitch
- Enclosure: IP65 steel or GRP control panel with cable glands
- Fusing: Appropriately rated MCB or fuse for heater circuit protection
Contact support@konmask.com for complete BOM assistance and cross-referencing.
Compliance & Industry Standards
- CE Marking: Compliant with EU Low Voltage Directive and EMC Directive (verify with current datasheet).
- UL Listing: UL recognition for applicable North American markets (confirm model suffix).
- IEC 61511 / IEC 61508: ICS TRIPLEX products are designed with functional safety principles; confirm SIL rating for safety-instrumented system applications.
- RoHS: Compliant with EU Restriction of Hazardous Substances Directive.
- ATEX / IECEx: Consult factory for hazardous area variants if required for Zone 1/2 installations.
Quality Assurance & Sourcing
At Konmask.com, every ICS TRIPLEX T8800 unit is:
- Sourced from authorized distributors or verified surplus channels with full traceability documentation.
- Inspected for physical integrity, label authenticity, and packaging condition prior to dispatch.
- Shipped with original manufacturer documentation where available.
- Backed by our quality guarantee — if the part does not match the specification, we resolve it.
We specialize in supporting engineers who need hard-to-find industrial automation components with short lead times and competitive pricing.
How to Source This Part
- Add to Cart directly from this page for standard stock orders.
- Request a Quote for volume orders, project BOM pricing, or expedited delivery.
- Email Us: support@konmask.com with your PO number, required quantity, and delivery timeline.
- Call / WhatsApp: +0086 19859288691 for urgent procurement support.
- Provide your full part number including any suffix codes to ensure exact variant match.
Application-Specific FAQ
Q: Can the T8800 be used in a SIL 2 safety loop?
A: ICS TRIPLEX designs products with functional safety in mind. Consult the official SIL certificate and ICS TRIPLEX’s safety manual for the T8800 before specifying in a SIL-rated loop.
Q: What sensor types are compatible with the T8800?
A: The T8800 typically accepts PT100 RTD and thermocouple inputs (Type K/J). Confirm the exact input configuration from the model suffix on your order documentation.
Q: Is the T8800 suitable for outdoor installations?
A: The base unit is rated for panel/DIN rail mounting. For outdoor or wash-down environments, install within an appropriately rated IP65/IP66 enclosure.
Q: Can I replace a legacy T8800 with a newer ICS TRIPLEX model?
A: Functional equivalents may exist in the current ICS TRIPLEX portfolio. Contact us for a cross-reference and compatibility assessment before substituting in a live system.
Q: What is the lead time for the T8800?
A: Lead time depends on current stock levels. Contact us at support@konmask.com or +0086 19859288691 for real-time availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
