Lenze EPM-H515 HMI Touch Screen Panel | Replacement, Equivalent & Selection Guide
The Lenze EPM-H515 is a high-performance Human-Machine Interface (HMI) touch screen panel designed for industrial automation systems. As an authorized distributor and sourcing specialist, Konmask.com provides genuine Lenze EPM-H515 units alongside verified compatible replacements and equivalent models to keep your production line running.
Technical Specifications
- Part Number / SKU: EPM-H515
- Brand: Lenze
- Series: EPM-H (Lenze HMI Panel Series)
- Display Type: TFT Color Touch Screen
- Screen Size: 5.7″ (nominal, verify datasheet)
- Resolution: 320 × 240 (QVGA) – confirm with official Lenze datasheet
- Interface: RS-232 / RS-485 / Ethernet (model-dependent)
- Operating Voltage: 24 V DC
- Operating Temperature: 0 °C to +50 °C
- Protection Rating: IP65 (front panel)
- Weight: approx. 2,300 g (with mounting hardware)
- Certifications: CE, UL (verify current listing)
Note: Always cross-reference with the official Lenze EPM-H515 datasheet before installation. Specifications subject to revision by manufacturer.
Compatible Replacement & Equivalent Models
If the Lenze EPM-H515 is discontinued, on extended lead time, or outside budget, the following models are commonly evaluated as functional equivalents. Compatibility must be verified against your specific application requirements.
- Lenze EPM-H510 – Smaller 4.3″ variant in the same EPM-H series; same 24 V DC supply, reduced screen real estate.
- Lenze EPM-H520 – Larger 7″ upgrade path; pin-compatible power connector, expanded I/O options.
- Siemens SIMATIC HMI KTP600 Basic – 5.7″ TFT, 24 V DC, PROFINET/MPI; widely used as a cross-brand replacement in mixed-vendor panels.
- Weintek MT6050i – 5″ TFT, 24 V DC, RS-232/RS-485/Ethernet; cost-effective alternative with broad PLC driver support.
- Schneider Electric HMISTO511 – 3.5″ compact option for space-constrained retrofits; evaluate I/O mapping carefully.
- Pro-face GP4301TW – 5.7″ TFT, 24 V DC; strong multi-protocol support for legacy Lenze drive integration.
⚠ Disclaimer: Third-party replacements require engineering validation. Konmask.com recommends consulting your system integrator before substitution.
Why Choose the Original Lenze EPM-H515
- ✅ Native integration with Lenze i700, i550, and 8400 drive series via Lenze EASY Starter
- ✅ Pre-validated parameter sets — zero re-engineering for existing Lenze projects
- ✅ Lenze firmware update path ensures long-term cybersecurity compliance
- ✅ Genuine spare parts availability through authorized distribution channels
- ✅ Reduced commissioning time vs. cross-brand alternatives
Typical Applications
- Machine tool operator panels and CNC status displays
- Conveyor and material handling control stations
- Packaging line HMI interfaces
- HVAC and building automation local control panels
- Pump and compressor monitoring stations
- Retrofit upgrades for legacy Lenze drive systems
System Compatibility
The Lenze EPM-H515 is designed to operate within the Lenze automation ecosystem and has been tested with the following platforms:
- Lenze i700 Servo Inverter Series
- Lenze i550 Protec Frequency Inverter
- Lenze 8400 StateLine / TopLine / HighLine
- Lenze L-force Controller (via Ethernet/IP or CANopen)
- Third-party PLCs via Modbus RTU / Modbus TCP (application-dependent)
Selection Guide
Use the table below to determine whether the EPM-H515 or an alternative best fits your project:
| Requirement | Recommended Model |
|---|---|
| Direct Lenze drive integration, 5.7″ screen | Lenze EPM-H515 ✅ |
| Budget retrofit, multi-brand PLC support | Weintek MT6050i |
| Siemens TIA Portal environment | Siemens KTP600 Basic |
| Larger display upgrade, same Lenze ecosystem | Lenze EPM-H520 |
| Space-constrained panel, compact form factor | Schneider HMISTO511 |
| Legacy protocol support (DF1, Modbus, etc.) | Pro-face GP4301TW |
Quality Assurance & Sourcing
- All units sourced through verified supply chains with full traceability
- Pre-shipment inspection: visual, functional, and label verification
- Anti-counterfeit checks: hologram, serial number, and packaging integrity
- Warranty: 12 months from shipment date (subject to terms)
- Certificates of conformity available upon request
How to Order
- Confirm your exact part number: EPM-H515 (check nameplate on existing unit)
- Specify quantity and required delivery timeline
- Request a formal quotation via support@konmask.com or call +0086 19859288691
- Provide shipping address and preferred Incoterms (EXW / FOB / CIF)
- Payment: T/T, PayPal, or credit card (contact us for terms)
Replacement & Compatibility FAQ
Q: Is the Lenze EPM-H515 still in production?
A: Production status changes over time. Contact us for current availability and lead times.
Q: Can I use a Weintek or Pro-face panel to replace the EPM-H515?
A: Yes, with engineering effort. You will need to recreate the HMI project in the target platform’s software and remap all PLC tags. Konmask.com can advise on compatibility.
Q: Do you supply refurbished EPM-H515 units?
A: We supply both new and professionally refurbished units. Refurbished units are clearly labeled and carry a separate warranty. Please specify your preference when requesting a quote.
Q: What is the lead time for a new Lenze EPM-H515?
A: Lead times vary by stock availability. In-stock units ship within 3–5 business days. Contact us for current stock status.
Q: Can Konmask.com provide the EPM-H515 datasheet?
A: Yes. Email support@konmask.com with your request and we will provide the official Lenze documentation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
