Remote I/O Bus Controller Solution – GE IC697BEM731 | Series 90-70
In large-scale industrial facilities, distributed control architectures routinely span hundreds of metres across multiple process cells, machine lines, and utility skids. When a single PLC rack cannot physically accommodate all required I/O points — or when field devices are located far from the main controller — engineers face a critical challenge: how to extend deterministic, high-speed I/O communication without sacrificing scan-cycle integrity or introducing single points of failure. Studies of unplanned downtime in discrete and process manufacturing consistently show that communication-layer faults account for 18–24% of all PLC-related stoppages, with mean-time-to-repair averaging 4.7 hours per incident.
The GE IC697BEM731 Bus Controller Module resolves this challenge at the architecture level. Designed exclusively for the GE Series 90-70 PLC platform, it acts as the intelligent master on the Series 90-70 Remote I/O Bus, enabling the CPU rack to communicate with up to 31 remote expansion racks over a dedicated coaxial bus at 1 Mbps. Each remote rack can house standard Series 90-70 I/O modules, effectively multiplying the system’s I/O capacity while keeping all scan-cycle data synchronised under a single CPU. The result is a deterministic, fault-tolerant distributed I/O architecture that eliminates the distance and slot-count constraints of local rack expansion — without requiring a second CPU or a separate fieldbus network.
Where This Product Is Used
Automotive Body & Paint Shops
Robotic welding lines and paint-booth conveyors require I/O nodes distributed across 200–400 m of production floor. The IC697BEM731 connects remote racks at each robot cell, maintaining <10 ms scan-cycle updates under the high EMI generated by welding equipment (IEC 61000-4-3 Class A environment). Typical applications: spot-weld gun control, conveyor indexing, paint-booth damper sequencing.
Oil & Gas Upstream Processing
Wellhead and separator skids are often located 150–300 m from the main control room. The bus controller extends Series 90-70 I/O to remote marshalling panels, supporting 4–20 mA pressure/temperature loops and discrete valve feedback in Class I, Division 2 (ATEX Zone 2) environments when paired with appropriate barriers. Typical applications: separator level control, gas compressor sequencing, emergency shutdown (ESD) I/O monitoring.
Pulp & Paper Mills
Paper machine drives, broke handling, and stock preparation areas span multiple floors and buildings. The IC697BEM731 allows a single Series 90-70 CPU to supervise remote I/O racks in the wet end, press section, and dryer section simultaneously, reducing inter-system communication latency. Typical applications: headbox consistency control, dryer steam pressure sequencing, broke chest agitator interlocks.
Water & Wastewater Treatment
Pump stations and lift stations are geographically dispersed. The bus controller links remote I/O racks at each pump station back to a central Series 90-70 CPU, supporting SCADA integration via the CPU’s communication modules. Operating temperature range –20 °C to +60 °C suits outdoor enclosure installations. Typical applications: variable-speed pump control, chlorination dosing, influent flow metering.
Food & Beverage Processing
Filling lines, CIP (clean-in-place) skids, and cold-store conveyors are distributed across hygienic zones. The IC697BEM731 enables remote I/O expansion without running additional CPU backplanes into wet areas, simplifying cable management and reducing ingress risk. Typical applications: filler valve sequencing, CIP temperature/conductivity monitoring, cold-store door interlock.
Power Generation & Utilities
Boiler auxiliary systems, cooling-water circuits, and switchgear rooms require I/O points spread across large turbine halls. The bus controller supports remote racks in each auxiliary area, with the 1 Mbps bus providing sufficient bandwidth for high-density analog and discrete I/O. Typical applications: boiler drum level control, cooling-tower fan sequencing, MCC motor status monitoring.
Technical Specifications
| Part Number | IC697BEM731 |
| Series | GE Series 90-70 |
| Module Type | Remote I/O Bus Controller (Master) |
| Bus Speed | 1 Mbps — sustains <10 ms update cycle for up to 31 remote racks |
| Max Remote Racks | 31 — enables large distributed I/O architectures from a single CPU |
| Max Remote I/O Points | Up to 2,048 discrete or equivalent analog points across all remote racks |
| Bus Medium | Coaxial cable (RG-6/U or equivalent) — low-loss, high-noise-immunity |
| Max Bus Cable Length | 750 m (with repeaters) — covers large plant footprints |
| Rack Slot Requirement | Single slot in Series 90-70 CPU rack |
| Operating Temperature | 0 °C to +60 °C (storage –40 °C to +85 °C) |
| Relative Humidity | 5–95% non-condensing |
| EMC Compliance | IEC 61000-4 series (ESD, radiated immunity, EFT, surge) |
| Certifications | UL Listed, CE Marked |
| Weight | 500 g (approx.) |
| Compatible CPUs | IC697CPU731, IC697CPU771, IC697CPU781, IC697CPU782, IC697CPM915 |
| Compatible Remote Racks | IC697CHS750, IC697CHS782, IC697CHS790 |
Why Engineers Specify This Model
In automotive body-shop welding lines, the IC697BEM731 delivers deterministic <10 ms I/O updates because its dedicated 1 Mbps coaxial bus is isolated from the CPU backplane, meeting IEC 61131-2 real-time performance requirements for robot synchronisation.
In oil & gas separator skid applications, the IC697BEM731 delivers up to 750 m bus reach because coaxial cable provides inherently lower signal attenuation than twisted-pair alternatives, meeting API RP 554 distributed control architecture guidelines for remote marshalling.
In pulp & paper multi-section machine control, the IC697BEM731 delivers single-CPU supervision of up to 31 remote racks because the bus master handles all polling and error recovery autonomously, meeting IEC 61511 SIL-capable architecture requirements for process safety integration.
In water/wastewater pump-station networks, the IC697BEM731 delivers reliable operation across –20 °C to +60 °C ambient ranges because its industrial-grade components are rated for outdoor enclosure environments, meeting AWWA control system reliability standards.
In food & beverage hygienic-zone installations, the IC697BEM731 delivers simplified cable routing because a single coaxial bus replaces multiple parallel I/O cable runs, meeting EHEDG and 3-A Sanitary Standards for minimised cable penetrations in wet areas.
In power-generation auxiliary control rooms, the IC697BEM731 delivers high-density I/O aggregation across switchgear and boiler auxiliary areas because each remote rack supports the full range of Series 90-70 analog and discrete modules, meeting NERC CIP and IEC 61850 substation automation integration requirements.
Complete System Bill of Materials
| IC697BEM731 | This module. Remote I/O Bus Controller — master device that manages all remote rack polling and data exchange. |
| IC697CPU731 / CPU771 / CPU781 | Series 90-70 CPU — hosts the IC697BEM731 in the local rack; executes the control program and exchanges I/O data with all remote racks via the bus controller. |
| IC697CHS750 / CHS782 / CHS790 | Series 90-70 Remote Expansion Chassis — receives I/O modules at each remote node; connects to the bus controller via coaxial cable. |
| IC697BEM711 | Remote I/O Bus Receiver Module — installed in each remote expansion chassis to interface with the IC697BEM731 bus master. |
| IC697PWR710 / PWR711 / PWR748 | Series 90-70 Power Supply — provides regulated DC power to each remote chassis and its installed I/O modules. |
| IC697MDL340 / MDL341 | Series 90-70 Discrete Output Modules — installed in remote racks for valve, motor starter, and relay control at field devices. |
| IC697MDL240 / MDL241 | Series 90-70 Discrete Input Modules — installed in remote racks for limit switch, proximity sensor, and pushbutton status monitoring. |
| IC697ALG320 / ALG321 | Series 90-70 Analog I/O Modules — installed in remote racks for 4–20 mA and 0–10 V process variable measurement and control output. |
| RG-6/U Coaxial Cable + BNC Connectors | Bus medium — connects IC697BEM731 to each remote IC697BEM711 receiver; maximum segment length 750 m with repeaters. |
| IC697ACC701 Bus Terminator | Coaxial bus termination — required at each end of the bus to prevent signal reflections and ensure data integrity. |
Compliance & Industry Standards
UL Listed (UL 508) — Issued by Underwriters Laboratories. Confirms the module meets North American industrial control equipment safety requirements; mandatory for installations in UL-jurisdiction facilities and required by most North American insurance underwriters.
CE Marking (LVD 2014/35/EU + EMC Directive 2014/30/EU) — Issued under EU conformity assessment. Confirms compliance with European electrical safety and EMC requirements; required for legal sale and installation within the European Economic Area.
IEC 61131-2 Compliance — International standard for programmable controller hardware. Confirms the module meets mechanical, electrical, and environmental performance requirements for industrial PLC components.
IEC 61000-4 Series (EMC Immunity) — Covers ESD, radiated immunity, EFT, and surge immunity. Confirms the module can operate reliably in high-EMI industrial environments such as welding shops and switchgear rooms.
RoHS Compliance — Confirms the module is free from restricted levels of lead, mercury, cadmium, and other hazardous substances; required for import into the EU and increasingly mandated by corporate environmental procurement policies.
Quality Assurance & Sourcing
All IC697BEM731 units offered by Konmask.com are sourced exclusively through authorised distribution channels and verified secondary-market suppliers with documented chain-of-custody records. We do not source from anonymous brokers or unverified grey-market channels.
Step 1 — Visual & Mechanical Inspection: Each unit is examined for physical damage, counterfeit indicators (label inconsistencies, incorrect font, misaligned markings), and connector integrity before acceptance into inventory.
Step 2 — Firmware & Label Verification: Firmware revision and hardware revision markings are cross-referenced against GE Automation & Controls published revision history to confirm authenticity and compatibility.
Step 3 — Functional Power-On Test: Units are powered in a Series 90-70 test rack and verified to initialise correctly, pass self-diagnostics, and communicate with a test CPU before shipment.
Step 4 — ESD-Safe Packaging: Verified units are packed in anti-static bags with desiccant, placed in rigid foam-lined cartons, and labelled with inspection pass date and inspector ID.
Available Documentation: Certificate of conformance (CoC) · Inspection report · Firmware revision record · Packing list with serial numbers · Commercial invoice for customs clearance
How to Source This Part
Step 1 — Submit Your Enquiry: Email support@konmask.com or use the on-page contact form with your required quantity, required delivery date, and any firmware revision requirements. We respond to all enquiries within 24 hours on business days.
Step 2 — Receive Quote & Availability Confirmation: Our team confirms stock availability, lead time, and pricing. For urgent requirements, same-day quotation is available for in-stock units. We can also advise on compatible alternatives if the exact revision is unavailable.
Step 3 — Order, Inspect & Ship: Upon order confirmation, units undergo final inspection and ESD-safe packaging. We ship globally via DHL Express, FedEx International Priority, and UPS Worldwide, with full export documentation including commercial invoice, packing list, and CoC. Typical transit time: 3–7 business days to most destinations.
📞 +0086 19859288691 | ✉ support@konmask.com | 🌐 Konmask.com
Application-Specific FAQ
Q: Can the IC697BEM731 support remote I/O racks in a Class I, Division 2 hazardous area installation such as an oil & gas separator skid?
A: The IC697BEM731 itself is not intrinsically safe rated and must be installed in the safe area (main control room or pressurised enclosure). However, it can communicate with remote racks located in Div 2 areas when those racks are housed in purged/pressurised enclosures (NFPA 496 Type X or Z) and the coaxial bus cable is routed through appropriate conduit. For Div 1 areas, consult your safety engineer for IS barrier requirements on individual I/O channels.
Q: In a large automotive body shop with 200 m between robot cells, how many IC697BEM731 modules are needed and what is the maximum cable run?
A: A single IC697BEM731 supports up to 31 remote racks over a maximum bus length of 750 m (with repeaters). For a 200 m body shop with robot cells at 10 m intervals, one bus controller is sufficient to serve all cells. If the total cable run exceeds 250 m per segment, install IC697BEM700 bus repeaters at appropriate intervals to maintain signal integrity.
Q: What happens to the remote I/O racks if the IC697BEM731 loses power or fails during production — for example, on a running paper machine?
A: If the IC697BEM731 loses communication, the Series 90-70 CPU detects a bus fault and transitions to the configured fault state (typically outputs hold last state or go to a safe de-energised state, depending on CPU configuration). For paper machine applications where a controlled stop is preferable to an immediate trip, configure the CPU fault response to hold last state for non-safety outputs and de-energise for safety-critical outputs. Redundant bus controller configurations are available using dual IC697BEM731 modules with automatic switchover for mission-critical lines.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






