SIEMENS 6ES7960-1AA04-0XA0 — Synchronization Submodule for Fiber-Optic Patch Cable | SIMATIC S7-400H Redundancy Platform
Engineering Background
The SIMATIC S7-400H is Siemens’ flagship high-availability PLC platform, engineered for process-critical applications where unplanned downtime is operationally or financially unacceptable. The H-system architecture achieves fault tolerance through a dual-CPU configuration in which two identical CPUs operate in hot-standby synchronization. The integrity of this synchronization link is entirely dependent on the sync submodule — the hardware interface that couples the two CPUs via fiber-optic patch cable.
Product Positioning
The 6ES7960-1AA04-0XA0 is the current-generation sync submodule designed for the S7-400H CPU pair. It provides the physical and protocol layer for inter-CPU state synchronization, enabling bumpless switchover in the event of a CPU fault. This module is a mandatory component in any S7-400H redundant configuration and is not interchangeable with earlier sync submodule variants without firmware compatibility verification.
Complete Technical Specifications
- Part Number: 6ES7960-1AA04-0XA0
- MLFB: 6ES7 960-1AA04-0XA0
- Manufacturer: Siemens AG, Automation & Drives
- Product Family: SIMATIC S7-400H
- Module Type: Synchronization Submodule (Sync Module)
- Interface: Fiber-optic patch cable (LC duplex, multi-mode)
- Synchronization Method: Hardware-based inter-CPU state synchronization
- Redundancy Mode: Hot-standby (1-of-2 CPU active, bumpless switchover)
- Compatible CPUs: SIMATIC S7-400H CPU 41x-5H series (verify firmware revision)
- Max Sync Cable Length: Up to 10 m (standard patch cable); extended distances via fiber repeater
- Operating Temperature: 0 °C to +60 °C
- Storage Temperature: −40 °C to +70 °C
- Relative Humidity: 10–95 % (non-condensing)
- Degree of Protection: IP20 (installed in S7-400 rack)
- Supply Voltage: Powered via CPU backplane (no external supply required)
- Weight: Approx. 80 g
- Dimensions (W × H × D): Per S7-400 submodule form factor
- Certifications: CE, UL, cULus, ATEX (zone-dependent; verify with Siemens datasheet)
- STEP 7 / TIA Portal: Configurable in STEP 7 V5.x and TIA Portal V13+
Proven Application Environments
- Oil & Gas: Upstream wellhead control, pipeline SCADA, compressor station automation — where process continuity is safety-critical and SIL 2/3 compliance is required.
- Chemical & Petrochemical: Reactor control, distillation column management, and batch processing where CPU fault must not interrupt the control loop.
- Power Generation & Utilities: Turbine control, substation automation, and grid-tie protection systems requiring sub-second failover.
- Water & Wastewater: Pumping station control and treatment plant automation with 24/7 uptime mandates.
- Automotive Manufacturing: Body-in-white welding lines and paint shop conveyors where line stoppage carries high cost-per-minute penalties.
- Pharmaceutical: GMP-compliant batch control systems where audit trail continuity across CPU switchover is required.
Engineering Advantages
- Bumpless Switchover: Synchronization at the memory-image level ensures the standby CPU takes over with zero process disruption — no output glitch, no setpoint loss.
- Fiber-Optic Isolation: Galvanic isolation between CPUs eliminates ground-loop interference and provides immunity to conducted EMI on the sync link.
- Deterministic Sync Cycle: Fixed synchronization cycle time ensures predictable worst-case switchover latency, critical for SIL-rated applications.
- Hot-Swap Capable: Module can be replaced during system operation (with appropriate CPU configuration) minimizing maintenance windows.
- Compact Form Factor: Plugs directly into the CPU submodule slot — no additional rack space or wiring required.
- Long Service Life: Siemens industrial-grade components rated for extended MTBF in continuous-duty environments.
System Architecture & Signal Flow
In a standard S7-400H configuration, two identical CPUs (CPU-1 and CPU-2) are installed in separate racks. Each CPU is fitted with one 6ES7960-1AA04-0XA0 sync submodule. A fiber-optic patch cable connects the two submodules, forming the synchronization link. During normal operation, CPU-1 (master) executes the user program and continuously mirrors its process image, data blocks, and timer/counter states to CPU-2 (standby) via this link. Upon detection of a CPU-1 fault, CPU-2 assumes master status within one synchronization cycle — typically within the OB1 scan time — with no interruption to I/O outputs or communications.
The sync submodule handles the physical layer (fiber-optic transceiver), the data-link layer (frame encoding/error detection), and the handshake protocol that governs switchover arbitration. It operates transparently to the user program; no special programming is required beyond the H-system configuration in STEP 7 or TIA Portal.
Sourcing & Quality Verification
- Origin: Sourced from authorized Siemens distribution channels and verified industrial surplus with full traceability.
- Inspection: Each unit undergoes visual inspection, label verification (MLFB, date code, firmware revision sticker), and connector integrity check prior to dispatch.
- Packaging: Ships in original Siemens ESD-protective packaging where available; otherwise in equivalent anti-static packaging with desiccant.
- Documentation: Certificate of conformity and test record available on request for regulated industries.
- Warranty: 12-month Konmask operational warranty covering manufacturing defects under normal operating conditions.
Procurement Process
- Step 1 — Inquiry: Submit your BOM or part number via the product page or email support@konmask.com with required quantity and delivery timeline.
- Step 2 — Quotation: Receive a formal quotation within 1 business day including unit price, lead time, and shipping options (DHL Express / FedEx / sea freight).
- Step 3 — Order Confirmation: Issue PO or pay via the online checkout. B2B net-30 terms available for qualified accounts.
- Step 4 — Dispatch: Orders confirmed before 14:00 CST ship same day. Tracking number provided within 2 hours of dispatch.
- Step 5 — After-Sales: Technical support available via email and WhatsApp (+0086 19859288691) for installation and commissioning queries.
Technical FAQ
Q: Is the 6ES7960-1AA04-0XA0 compatible with all S7-400H CPUs?
A: It is designed for the S7-400H CPU 41x-5H series. Compatibility with specific CPU firmware revisions should be verified against the Siemens compatibility matrix (Industry Online Support). Contact us with your CPU order number for a pre-sale compatibility check.
Q: Can I use a standard LC duplex multimode patch cable?
A: Yes. The module uses a standard LC duplex interface. Siemens recommends OM2 or OM3 multimode fiber for distances up to 10 m. For longer runs, consult the S7-400H system manual for repeater options.
Q: What happens if the sync submodule fails during operation?
A: The S7-400H CPU detects loss of synchronization and logs a diagnostic event. The system continues to operate in simplex mode (single CPU) and generates an alarm. The faulty submodule should be replaced at the next maintenance window. No process interruption occurs at the moment of sync loss.
Q: Do I need to reprogram the CPU after replacing the sync submodule?
A: No. The sync submodule is a hardware interface only. After physical replacement, the H-system re-establishes synchronization automatically during the next CPU startup sequence.
Q: Is this module available for immediate shipment?
A: Stock availability is updated in real time on this page. For urgent requirements or quantities >5 units, contact us directly for a dedicated stock check and expedited shipping arrangement.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






