Pneumatic Cylinder Automation Solution — TURCK BIM-UNT-AP7X | BIM Series
The TURCK BIM-UNT-AP7X is a compact inductive magnetic cylinder position sensor engineered for reliable end-of-stroke detection in pneumatic and hydraulic cylinder applications. Designed for T-slot mounting on standard ISO cylinders, this sensor delivers consistent switching performance in demanding industrial environments where space, vibration, and contamination are everyday challenges.
Where This Product Is Used
Engineers and system integrators specify the BIM-UNT-AP7X across a wide range of motion-control and automation applications:
- Pneumatic cylinder end-of-stroke detection — confirms piston position in clamping, pressing, and indexing fixtures
- Robotic end-effector feedback — provides discrete position signals to PLCs for gripper open/close confirmation
- Conveyor and transfer systems — detects actuator home and extended positions on pick-and-place stations
- Injection molding & die casting — monitors mold-open and mold-close cylinder positions in high-cycle environments
- Packaging machinery — validates stroke completion on folding, sealing, and cutting actuators
- Automotive assembly lines — used in body-in-white jigs and welding fixtures for cylinder position verification
- Food & beverage processing — IP67-rated housing withstands washdown and humid environments
Technical Specifications
| Part Number | BIM-UNT-AP7X |
| Manufacturer | TURCK |
| Sensor Type | Inductive Magnetic Cylinder Position Sensor |
| Mounting Style | T-slot (ISO cylinder groove) |
| Supply Voltage | 10–30 VDC |
| Output Type | PNP / NPN (model-dependent) |
| Switching Function | Normally Open (NO) |
| Protection Rating | IP67 |
| Operating Temperature | −25 °C to +70 °C |
| Connection | Integral cable / M8 connector |
| Housing Material | Plastic (PA) |
| Weight | ~100 g |
| Compatible Cylinder Profiles | Standard T-slot ISO 15552 / VDMA 24562 |
Specifications are based on TURCK published datasheets. Confirm exact variant parameters with your application engineer before ordering.
Why Engineers Specify This Model
- Flush T-slot form factor — slides directly into standard cylinder grooves without brackets or adapters, reducing installation time to under 2 minutes
- Magnetic field detection — senses the piston magnet through the cylinder wall; no mechanical contact, no wear, no false triggers from vibration
- Wide supply voltage range (10–30 VDC) — compatible with 12 V and 24 V PLC I/O cards without additional signal conditioning
- IP67 ingress protection — sealed against dust and temporary immersion; suitable for washdown zones and outdoor enclosures
- TURCK reliability pedigree — TURCK sensors are specified in automotive, food, and heavy-industry OEM machinery worldwide for their long MTBF and consistent switching repeatability
- LED status indicator — visual confirmation of switching state simplifies commissioning and fault diagnosis without a multimeter
Complete System Bill of Materials
For a complete pneumatic cylinder position-sensing loop, consider pairing the BIM-UNT-AP7X with:
- ISO 15552 pneumatic cylinder (any standard T-slot profile)
- 24 VDC PLC digital input module (e.g., Siemens SM 321, Allen-Bradley 1734-IB8)
- M8 or M12 sensor cable extension (shielded, 3-wire PNP)
- DIN rail terminal block for field wiring consolidation
- 24 VDC SMPS power supply (sized to total sensor load)
- Cable management conduit or drag chain for moving-axis installations
Compliance & Industry Standards
- CE Marking — compliant with EU Low Voltage Directive and EMC Directive
- RoHS — manufactured without restricted hazardous substances
- IP67 — per IEC 60529 ingress protection standard
- ISO 15552 / VDMA 24562 — T-slot geometry compatible with standard pneumatic cylinder profiles
- UL Recognition — consult TURCK datasheet for applicable UL file numbers
Quality Assurance & Sourcing
Konmask.com sources TURCK components through established industrial distribution channels. Every unit shipped is:
- Inspected for original manufacturer packaging and label integrity
- Cross-referenced against TURCK part number databases to confirm authenticity
- Stored in ESD-safe, climate-controlled warehouse conditions
- Accompanied by a Konmask quality inspection record upon request
We do not supply grey-market, refurbished, or counterfeit components. If you require a Certificate of Conformance or third-party inspection, please contact us before placing your order.
How to Source This Part
- Add to cart — click the purchase button above to place a standard order
- Request a quote — for quantities >10 units or project-based procurement, email [email protected] for volume pricing
- Confirm lead time — in-stock units ship within 1–3 business days; out-of-stock items are sourced to order (typical 5–15 business days)
- Provide your PO or project reference — B2B customers may submit a purchase order; net-30 terms available upon credit approval
- Shipping options — DHL Express, FedEx International Priority, and sea freight consolidation available for international orders
Application-Specific FAQ
Q: Will the BIM-UNT-AP7X work on a non-magnetic piston cylinder?
A: No. This sensor detects the magnetic field of the piston magnet. Cylinders must have a built-in piston magnet (standard on most ISO 15552 cylinders). Verify with your cylinder manufacturer before ordering.
Q: Can I use this sensor with a 12 VDC PLC input?
A: Yes. The 10–30 VDC supply range covers both 12 V and 24 V systems. Confirm your PLC input threshold voltage is compatible with the sensor’s output switching level.
Q: What is the maximum switching frequency?
A: Refer to the TURCK BIM-UNT-AP7X datasheet for the rated switching frequency. For high-speed indexing applications (>5 Hz), confirm the sensor response time against your cycle time requirements.
Q: Is the cable length customizable?
A: The standard unit ships with a fixed cable length. M8 connector variants allow field-installable cable extensions. Specify your required cable length when requesting a quote.
Q: Do you provide TURCK factory certificates?
A: We can provide manufacturer documentation available through our distribution channel. For factory-direct certificates, contact TURCK directly or request documentation at the time of order.
Q: Can this sensor be used in ATEX / hazardous area zones?
A: The standard BIM-UNT-AP7X is not ATEX-rated. For hazardous area applications, consult TURCK’s Ex-rated sensor portfolio and contact us for sourcing assistance.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
