ABB 3HAC14678-1 Balancing Device | Replacement, Equivalent & Selection Guide
The ABB 3HAC14678-1 / 3HAC16198-1 / 3HAC17117-2 Balancing Device is a critical mechanical component used in ABB industrial robots to counterbalance arm weight, reduce motor load, and maintain precise positional accuracy throughout the robot’s working envelope. Konmask.com supplies this part with full traceability for MRO, OEM, and system integrator procurement.
Technical Specifications
- Part Numbers: 3HAC14678-1 / 3HAC16198-1 / 3HAC17117-2
- Manufacturer: ABB Robotics
- Component Type: Mechanical Balancing Device (Spring / Gas-Spring Assembly)
- Function: Counterbalances robot upper arm to reduce axis motor torque demand
- Mounting: Integrated frame-mount design, robot-model specific
- Condition: New OEM / Tested Refurbished (specify on order)
- Compatibility: ABB IRB series industrial robots (see System Compatibility below)
- Weight: Approx. 100 g (shipping unit; actual part weight varies by model)
- Origin: ABB Robotics supply chain
Compatible Replacement & Equivalent Models
The following part numbers are cross-referenced as direct or functional equivalents. Always verify robot model and axis configuration before substitution:
- 3HAC14678-1 — Primary OEM part number (base reference)
- 3HAC16198-1 — Revised BOM revision; functionally equivalent, same mounting interface
- 3HAC17117-2 — Updated assembly variant; compatible with later firmware revisions
- Third-party equivalents: Available upon request — contact Konmask for cross-reference validation
Note: ABB periodically supersedes part numbers. Konmask engineers verify current active part numbers before shipment.
Why Choose the Original Model
- OEM Dimensional Accuracy: Exact spring rate and stroke length engineered for ABB robot kinematics — aftermarket variants may cause axis calibration drift
- Certified Load Rating: Factory-rated for the specific payload and duty cycle of the target robot model
- Plug-and-Play Replacement: No mechanical modification required; direct bolt-on installation
- Warranty Compliance: Using OEM parts preserves ABB service contract validity
- Reduced Downtime Risk: Eliminates compatibility guesswork — critical for 24/7 production lines
Typical Applications
- Automotive Body Welding: Spot and arc welding cells using ABB IRB robots where consistent arm balance is essential for weld path repeatability
- Palletizing & Material Handling: High-cycle pick-and-place operations where motor thermal protection depends on balanced arm load
- Machine Tending: CNC loading/unloading with extended reach requiring stable axis 2/3 counterbalance
- Assembly Lines: Electronics and consumer goods assembly where positional repeatability ±0.02 mm is required
- Painting & Coating: Spray robot applications where smooth, low-jerk arm motion depends on proper balancing
System Compatibility
- ABB IRB 1400 / 1600 series
- ABB IRB 2400 / 2600 series
- ABB IRB 4400 / 4600 series
- ABB IRB 6400 / 6600 / 6640 series
- Compatible IRC4 and IRC5 controller generations
Confirm your exact robot model and serial number with Konmask before ordering to ensure correct variant selection.
Selection Guide
Use the following criteria to select the correct balancing device for your application:
- Step 1 — Identify Robot Model: Locate the robot nameplate (model + serial number)
- Step 2 — Check Current Part Number: Reference your ABB spare parts manual or IRC controller BOM
- Step 3 — Confirm Revision: 3HAC14678-1 (original) → 3HAC16198-1 (Rev B) → 3HAC17117-2 (Rev C); use the latest revision unless your robot requires a specific version
- Step 4 — Specify Condition: New OEM for critical production; tested refurbished for maintenance stock or budget projects
- Step 5 — Contact Konmask: Submit model + serial for final confirmation before purchase
Quality Assurance & Sourcing
- All parts sourced from ABB-authorized distributors or verified secondary market with full traceability documentation
- Pre-shipment inspection: dimensional check, spring force verification, surface condition assessment
- Packaging: anti-static, moisture-barrier packaging with part number label and batch record
- Documentation available: Certificate of Conformance, test report, original ABB packing slip (where applicable)
- Export compliance: HS Code classification and export documentation provided for international orders
How to Order
- Online: Add to cart directly from this page — specify condition (New / Refurbished) in order notes
- Email RFQ: support@konmask.com — include robot model, serial number, and required quantity
- Phone / WhatsApp: +0086 19859288691 — available for urgent MRO procurement
- Lead Time: In-stock items ship within 1–3 business days; sourced items 5–15 business days
- MOQ: 1 piece
Replacement & Compatibility FAQ
Q: Can 3HAC16198-1 directly replace 3HAC14678-1?
A: Yes, in most IRB models these are functionally equivalent with the same mounting interface. Confirm with your robot’s spare parts manual or contact Konmask.
Q: Is 3HAC17117-2 backward compatible with older IRB robots?
A: Generally yes for mechanical fit, but spring rate may differ slightly. Konmask engineers can confirm compatibility for your specific serial number range.
Q: Do you supply refurbished balancing devices?
A: Yes. All refurbished units undergo spring force testing and dimensional inspection. Condition is clearly stated on the product listing and invoice.
Q: What is the typical failure mode for this part?
A: Gas spring pressure loss (gradual), spring fatigue causing axis 2/3 motor overload alarms, or mechanical wear at pivot points. Replace proactively during scheduled maintenance.
Q: Can I get a datasheet or ABB spare parts manual reference?
A: Yes — email support@konmask.com with your robot model and we will provide the relevant documentation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


