Semiconductor Equipment Power Solution – Applied Materials 0040-49884 E7627/Z | 0150-00947
Where This Product Is Used
The Applied Materials (AMAT) part number 0040-49884 (assembly revision E7627/Z, PCB P/N 0150-00947) is a power board module designed for use in Applied Materials semiconductor processing equipment. Typical deployment environments include:
- CVD (Chemical Vapor Deposition) systems — Centura, Producer, and P5000 platforms
- Etch systems — DPS, MxP, and related chamber controllers
- Fab maintenance depots — as a donor board for component-level repair
- University & R&D labs — legacy AMAT tool refurbishment programs
- Third-party equipment service providers (ESPs) — board swap and repair-by-exchange programs
This unit is listed as UNABLE TO POWER UP and is sold as-is for repair, parts harvesting, or reverse-engineering reference. It is not guaranteed functional.
Technical Specifications
- Manufacturer: Applied Materials (AMAT)
- Assembly Part Number: 0040-49884
- Assembly Revision: E7627/Z
- PCB / Sub-assembly P/N: 0150-00947
- Form Factor: PCB module / card assembly
- Weight: ~2,600 g (as shipped)
- Condition: Used — UNABLE TO POWER UP (fault/repair unit)
- Compatibility: Applied Materials CVD & etch platform families (verify against your tool BOM)
- Country of Origin: USA (original manufacture)
Why Engineers Specify This Model
- OEM-matched architecture — direct form, fit, and function replacement within AMAT tool families; no re-qualification of the chamber required
- Repair-by-exchange value — experienced board-level repair shops can restore this unit at a fraction of new-OEM cost, extending tool life by 3–5 years
- Component harvesting — high-value ICs, power MOSFETs, and passives on AMAT boards are often reusable; this unit is a cost-effective donor source
- Reverse-engineering reference — R&D teams use known-bad boards to develop in-house repair procedures and test fixtures
- Reduced lead time risk — OEM lead times for legacy AMAT assemblies can exceed 26 weeks; sourcing a repairable spare now protects uptime
Complete System Bill of Materials
This module typically operates alongside the following AMAT system components (verify against your specific tool configuration):
- Chamber controller PCB assembly
- RF match network / matchbox assembly
- Gas panel manifold and MFC modules
- Chiller / temperature control unit
- Vacuum pump and throttle valve controller
- Endpoint detection module
Contact us if you need assistance sourcing complementary assemblies for a complete system restoration.
Compliance & Industry Standards
- Original manufacture complies with SEMI S2 environmental, health, and safety guidelines for semiconductor manufacturing equipment
- PCB assembly manufactured to IPC-A-610 workmanship standards
- RoHS status: verify with OEM documentation for your specific revision
- Note: This unit is sold as a repair/parts item. Buyer is responsible for verifying compliance requirements before reinstallation in a regulated fab environment.
Quality Assurance & Sourcing
- Physically inspected and photographed prior to listing
- Part numbers verified against visible silkscreen markings on the PCB
- Stored in ESD-safe packaging in a climate-controlled warehouse
- Sold with full photo documentation — contact us for additional images or video inspection
- Sourced from decommissioned fab equipment through authorized asset disposition channels
How to Source This Part
- Confirm compatibility — cross-reference 0040-49884 / 0150-00947 against your tool’s BOM or AMAT service manual
- Request additional photos — email [email protected] with your tool model and chamber configuration
- Place your order — add to cart or contact us for bulk/urgent procurement
- Arrange shipping — we ship worldwide with ESD-safe, double-box packaging; DHL / FedEx express available
- Repair & reinstall — work with a qualified board-level repair vendor or AMAT-certified service engineer
Application-Specific FAQ
Q: Is this unit tested or guaranteed to work?
A: No. This unit is listed as UNABLE TO POWER UP and is sold strictly as-is for repair or parts. No warranty on functionality is provided.
Q: Can this board be repaired?
A: Many AMAT power boards with this symptom are repairable at the component level (failed capacitors, MOSFETs, or power regulators). We recommend engaging a specialist ESP with AMAT board repair experience.
Q: What tools is this compatible with?
A: Cross-reference P/N 0040-49884 with your AMAT tool BOM. Common platforms include Centura, Producer, and P5000 families. Contact us to verify fit for your specific tool.
Q: Do you have a working replacement available?
A: Contact us — we maintain an active network of AMAT spare parts and may be able to source a tested unit or exchange program.
Q: What is the lead time?
A: This is an in-stock item. Orders ship within 1–3 business days after payment confirmation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
