Fieldbus Communication Solution — BACHMANN FS212/N | M1 Series
Where This Product Is Used
The BACHMANN FS212/N is a PROFIBUS DP fieldbus slave communication module designed for integration into BACHMANN M1 automation controllers. It is deployed across demanding industrial environments where deterministic, high-speed fieldbus communication is essential:
- Wind Turbine Control Systems — Coordinating pitch control, converter, and safety relay nodes over PROFIBUS DP networks in nacelle and tower cabinets.
- Hydropower & Turbine Governors — Interfacing BACHMANN M1 controllers with third-party drives, sensors, and actuators via standardized fieldbus.
- Industrial Machine Automation — Connecting PLCs to distributed I/O stations, variable frequency drives (VFDs), and smart field devices on the plant floor.
- Process Industry (Oil & Gas, Chemical) — Slave-mode fieldbus integration in DCS architectures requiring certified, deterministic communication.
- Test Bench & Simulation Systems — Enabling real-time data exchange between BACHMANN M1 real-time controllers and external measurement or actuation hardware.
- Building Automation & Infrastructure — Large-scale HVAC and energy management systems using PROFIBUS DP as the backbone network.
Technical Specifications
| Manufacturer | BACHMANN electronic GmbH |
| Part Number | FS212/N |
| Module Series | M1 Automation System |
| Function | PROFIBUS DP Fieldbus Slave Communication Module |
| Protocol | PROFIBUS DP (EN 50170 / IEC 61158) |
| Operating Mode | Slave |
| Baud Rate | Up to 12 Mbit/s (auto-detect) |
| Connector | 9-pin D-Sub (DB9) female |
| Backplane Interface | BACHMANN M1 proprietary backplane bus |
| Configuration | Via BACHMANN SolutionCenter / GSD file |
| Supply Voltage | Via M1 backplane (no external supply required) |
| Weight | 260 g |
| Form Factor | Single-slot M1 plug-in module |
| Operating Temperature | 0 °C to +55 °C |
| Storage Temperature | −25 °C to +85 °C |
| Humidity | 5–95% RH, non-condensing |
| Certifications | CE, UL (refer to current BACHMANN datasheet) |
Why Engineers Specify This Model
- Native M1 Integration — Slots directly into the BACHMANN M1 rack with zero external wiring to the controller; backplane communication is handled automatically.
- Auto Baud-Rate Detection — Eliminates manual DIP-switch configuration; the module synchronizes to the master’s baud rate on power-up.
- Deterministic Real-Time Performance — PROFIBUS DP cyclic data exchange meets the hard real-time requirements of turbine control and safety-critical loops.
- GSD-Based Plug-and-Play — Standard GSD file allows any PROFIBUS DP master (Siemens, ABB, Schneider, etc.) to configure the slave without custom drivers.
- Compact Single-Slot Footprint — Maximizes rack density in space-constrained nacelle or panel installations.
- Proven Reliability in Renewables — Widely deployed in wind and hydro OEM platforms where MTBF and long-term spare availability are critical procurement criteria.
Complete System Bill of Materials
A typical BACHMANN M1 controller node with PROFIBUS DP slave capability requires the following components:
- BACHMANN MPC240 / MPC265 / MPC270 — CPU / Main Processing Module
- BACHMANN FS212/N — PROFIBUS DP Slave Module (this item)
- BACHMANN DI212 / DO212 — Digital I/O Modules (as required)
- BACHMANN AI204 / AO202 — Analog I/O Modules (as required)
- BACHMANN ETH201 — Ethernet Communication Module
- BACHMANN M1 Rack (4, 8, or 12 slot) — Backplane Chassis
- BACHMANN PS201 / PS202 — Power Supply Module
- PROFIBUS DP Cable (shielded, 9-pin DB9 connectors with termination resistors)
- BACHMANN SolutionCenter — Engineering & Configuration Software
Compliance & Industry Standards
- PROFIBUS DP — EN 50170, IEC 61158, IEC 61784
- EMC Directive — 2014/30/EU (CE marking)
- Low Voltage Directive — 2014/35/EU
- RoHS — 2011/65/EU compliant
- IEC 61131-3 — Compatible controller programming environment
- Wind Energy — Suitable for IEC 61400-series turbine control architectures
Quality Assurance & Sourcing
Konmask.com specializes in sourcing genuine, tested industrial automation components for B2B buyers worldwide. Every BACHMANN FS212/N module offered through our platform undergoes the following process:
- Authenticity Verification — Cross-referenced against BACHMANN part number databases and physical label inspection.
- Functional Pre-Shipment Test — Powered-on bench test to confirm module initialization and backplane communication integrity where applicable.
- Condition Grading — Clearly stated as New, Refurbished (tested), or Surplus stock. Contact us to confirm current inventory grade.
- Secure Packaging — ESD-safe anti-static bags, foam-lined cartons, and moisture barrier packaging for international shipment.
- Traceability — Serial number recorded and provided with shipment documentation upon request.
How to Source This Part
- Confirm your requirement — Verify the part number FS212/N against your BACHMANN M1 rack configuration and PROFIBUS DP network topology.
- Request a quote — Contact support@konmask.com or call +0086 19859288691 for current stock availability, lead time, and volume pricing.
- Submit a purchase order — We accept T/T bank transfer, PayPal, and other B2B payment terms by arrangement.
- Receive with documentation — Shipment includes packing list, test report (if applicable), and customs invoice for smooth import clearance.
- Installation support — Our technical team can advise on GSD file configuration and BACHMANN SolutionCenter integration if required.
Application-Specific FAQ
Q: Can the FS212/N operate as a PROFIBUS DP master?
A: No. The FS212/N is a slave-only module. For master functionality, refer to the BACHMANN FM211 or FM212 series.
Q: Is the FS212/N compatible with PROFIBUS PA?
A: No. This module supports PROFIBUS DP only. PROFIBUS PA requires a separate DP/PA coupler and is not natively supported by this module.
Q: Which BACHMANN CPU modules are compatible?
A: The FS212/N is compatible with all BACHMANN M1 series CPU modules (MPC240, MPC265, MPC270, etc.) that support the M1 backplane bus. Confirm firmware compatibility with your SolutionCenter version.
Q: What is the maximum number of FS212/N modules per rack?
A: Subject to rack slot availability and CPU resource allocation. Consult the BACHMANN M1 system manual for multi-module fieldbus configurations.
Q: Do you provide the GSD file?
A: Yes. The GSD file for the FS212/N is available upon request. Contact support@konmask.com with your order reference.
Q: What is the lead time for this part?
A: Lead time varies by stock availability. In-stock units ship within 3–5 business days internationally. Contact us for current availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
