BEARING CDX-HS/A 70/07 Single Cell Centrifugal Pump | Replacement, Equivalent & Selection Guide
The BEARING CDX-HS/A 70/07 (SKU: HP+/V-0010-02170 / EN-0020-85925) is a high-performance single-cell centrifugal pump engineered for demanding fluid transfer applications. This guide covers technical specifications, compatible replacements, equivalent models, and selection criteria to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
- Brand: BEARING
- Model: CDX-HS/A 70/07
- Series: CDX-HS
- Part Numbers: HP+/V 0010-02170 | EN 0020-85925
- Type: Single Cell Centrifugal Pump
- Configuration: Single Stage, Horizontal
- Country of Origin: Italy
- Weight: 2,600 g (approx.)
- Application: Clean water circulation, pressure boosting, irrigation, HVAC, industrial fluid transfer
- Compliance: EN standard (EN 0020-85925)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the BEARING CDX-HS/A 70/07. Always verify hydraulic performance curves and connection dimensions before substitution:
- BEARING CDX-HS/A 70/05 — Lower flow variant in the same CDX-HS series; verify head/flow requirements
- BEARING CDX-HS/A 70/10 — Higher capacity variant; suitable if system demands increased flow
- BEARING CDX 70/07 — Standard CDX series equivalent without HS reinforcement
- Grundfos CM5-4 — Cross-brand equivalent for similar duty points; check flange compatibility
- Lowara CEA 210/2 — Comparable single-stage centrifugal; verify motor rating and port size
- DAB K 30/30 M — Alternative for light-duty residential/commercial applications
Note: Cross-brand replacements require full hydraulic and mechanical verification. Contact support@konmask.com for application-specific guidance.
Why Choose the Original Model
- OEM-matched performance: Factory-calibrated hydraulic curves ensure system design integrity
- Certified compliance: Meets EN 0020-85925 standard for dimensional and performance interchangeability
- Proven reliability: BEARING CDX-HS series is widely deployed in European industrial and building services markets
- Spare parts availability: Full mechanical seal, impeller, and motor sub-assembly support
- Warranty protection: Original parts maintain system warranty where applicable
Typical Applications
- Domestic and commercial water pressure boosting
- Irrigation and agricultural water supply systems
- HVAC chilled/hot water circulation loops
- Light industrial process fluid transfer
- Swimming pool and water feature circulation
- Fire suppression pre-charge systems
System Compatibility
- Fluid: Clean, non-aggressive liquids (water, water-glycol mixtures)
- Connection standard: EN flange / BSP threaded ports (verify model suffix)
- Motor compatibility: Standard IEC frame; direct-coupled single-phase or three-phase options
- Control integration: Compatible with standard pressure switches, variable frequency drives (VFD), and building management systems (BMS)
- Ambient temperature: Typically 0°C to +40°C operating range
Selection Guide
Use the following criteria to confirm the CDX-HS/A 70/07 is the correct choice for your application:
- Step 1 — Define duty point: Confirm required flow rate (Q, m³/h) and total head (H, m) from system design
- Step 2 — Check performance curve: Verify the 70/07 curve covers your operating point with adequate margin
- Step 3 — Confirm connections: Match inlet/outlet port size and type (BSP/flange) to existing pipework
- Step 4 — Verify power supply: Confirm motor voltage, phase, and frequency match site supply
- Step 5 — Check fluid compatibility: Ensure fluid temperature and chemical composition are within pump material limits
- Step 6 — Consider alternatives: If the 70/07 is unavailable, refer to the Compatible Replacement section above
Quality Assurance & Sourcing
- All units sourced through authorized distribution channels with full traceability
- Products inspected for packaging integrity and part number verification prior to dispatch
- Genuine BEARING parts supplied with manufacturer documentation where available
- Konmask.com specializes in industrial automation and fluid handling components for B2B procurement
How to Order
- Online: Add to cart directly from this page
- Email RFQ: support@konmask.com — include quantity, delivery location, and any application details
- Phone/WhatsApp: +0086 19859288691
- Lead time: Contact us for current stock status and lead time confirmation
- Bulk / OEM pricing: Available for qualified B2B buyers — request a quote
Replacement & Compatibility FAQ
Q: Can I replace CDX-HS/A 70/07 with a standard CDX 70/07?
A: The CDX-HS series features reinforced hydraulic components. Substitution with the standard CDX is possible in low-duty applications but should be verified against system pressure requirements.
Q: Is the EN 0020-85925 number a European standard reference?
A: Yes, the EN prefix indicates compliance with a European Norm standard, ensuring dimensional and performance interchangeability within the certified scope.
Q: What is the difference between HP+/V and standard HP variants?
A: HP+/V designates an enhanced performance variant with improved hydraulic efficiency. Confirm with the original system documentation before substituting with a standard HP model.
Q: Do you supply mechanical seals and spare parts for this pump?
A: Yes. Contact us with your model number and we will identify compatible seal kits and wear parts.
Q: Can this pump be used with a VFD (variable frequency drive)?
A: Single-phase models have limitations with VFD control. Three-phase variants are generally VFD-compatible — confirm motor specifications before installation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
