Bently Nevada 21000-16-05-00-073-04-02 Proximity Probe Housing Assembly | Replacement, Equivalent & Selection Guide
The Bently Nevada 21000-16-05-00-073-04-02 is a precision Proximity Probe Housing Assembly designed for continuous vibration and position monitoring in rotating machinery. As an authorized sourcing partner, Konmask.com supplies genuine and compatible units with full traceability for industrial automation and condition monitoring systems.
Technical Specifications
- Part Number: 21000-16-05-00-073-04-02
- Brand: Bently Nevada (Baker Hughes)
- Series: 21000 Proximity Probe System
- Type: Proximity Probe Housing Assembly
- Probe Diameter: 16 mm
- Cable Length: 5 m (extension cable)
- Thread: M10 × 1 (standard)
- Connector: 073 series (per part number encoding)
- Output: Eddy-current, non-contact displacement signal
- Operating Temperature: −35 °C to +177 °C
- Weight: 1,400 g (assembly)
- Compliance: API 670, CE
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 21000-16-05-00-073-04-02. Always verify system compatibility before substitution:
- Bently Nevada 21000-16-05-10-073-04-02 — 10 m cable variant; same probe head and connector
- Bently Nevada 21000-08-05-00-073-04-02 — 8 mm probe diameter; verify clearance requirements
- Bently Nevada 330101-00-06-10-02-00 — 3300 XL 8 mm probe system; compatible with 3500 monitors
- Bently Nevada 330103-00-05-10-02-00 — 3300 XL 11 mm probe; widely used cross-reference
- Epro PR6423/010-040 — Third-party equivalent; eddy-current, 16 mm, API 670 rated
- Metrix ST5484E — Alternative housing assembly for turbomachinery applications
Note: Cross-references are provided for selection guidance only. Confirm part numbers with your OEM documentation or contact our engineers before ordering.
Why Choose the Original Model
- OEM Accuracy: Factory-calibrated sensitivity (−7.87 V/mm) ensures measurement integrity
- System Certification: Designed and tested for Bently Nevada 3500 & 3300 Series monitoring systems
- API 670 Compliance: Meets machinery protection standards for critical rotating equipment
- Long-Term Reliability: Stainless steel housing with hermetic sealing for harsh environments
- Full Traceability: Serialized units with calibration certificates available on request
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing displacement monitoring
- Gearbox and expander condition monitoring
- Petrochemical, power generation, and LNG plant machinery protection
System Compatibility
The 21000-16-05-00-073-04-02 is designed for use within the Bently Nevada 21000 Proximity Probe System and is compatible with the following monitors and drivers:
- Bently Nevada 3500/40M Proximitor® Monitor
- Bently Nevada 3500/42M Proximitor® Monitor
- Bently Nevada 3300 XL Proximitor® Sensor
- Bently Nevada 7200 Series Proximitor® Sensor (with adapter)
- Third-party monitors accepting −24 VDC eddy-current probe input (verify sensitivity)
Selection Guide
Use the table below to decode the 21000 series part number and select the correct variant for your application:
- Probe Diameter: 08 = 8 mm | 16 = 16 mm | 25 = 25 mm
- Cable Length: 05 = 5 m | 10 = 10 m | 15 = 15 m
- Armored Cable: 00 = standard | 10 = armored
- Connector Type: 073 = standard BNC-compatible | 040 = alternate
- Temperature Rating: 04 = standard (−35 °C to +177 °C) | 05 = high-temp
If your application requires a different cable length, probe diameter, or armored cable, contact support@konmask.com for a tailored recommendation.
Quality Assurance & Sourcing
- Source: Authorized distributor channels and verified surplus stock
- Inspection: Each unit undergoes visual, dimensional, and functional inspection before shipment
- Documentation: Calibration certificates, test reports, and country-of-origin documents available
- Warranty: 12-month warranty against manufacturing defects
- Anti-Counterfeit: All units verified against OEM serial number databases where applicable
How to Order
- Confirm your part number: 21000-16-05-00-073-04-02
- Specify quantity and required delivery timeline
- Request a quote via support@konmask.com or add directly to cart
- Provide your shipping address — we ship worldwide via DHL, FedEx, and UPS
- Receive order confirmation with tracking within 24 hours
Replacement & Compatibility FAQ
Q: Can I use a 3300 XL probe as a direct replacement for the 21000-16-05-00-073-04-02?
A: The 3300 XL series uses an 8 mm or 11 mm probe head and a different sensitivity curve. It is not a direct drop-in replacement without recalibrating the monitor. Consult your system documentation.
Q: Is the 21000-16-05-00-073-04-02 compatible with non-Bently Nevada monitors?
A: Yes, provided the monitor accepts a −24 VDC powered eddy-current probe with −7.87 V/mm sensitivity. Verify input specifications with your monitor manufacturer.
Q: What is the lead time for this part?
A: In-stock units ship within 1–3 business days. For out-of-stock items, typical lead time is 2–4 weeks. Contact us for real-time availability.
Q: Do you provide calibration certificates?
A: Yes. Calibration certificates are available upon request at no additional charge for new units.
Q: Can Konmask.com source other 21000 series variants?
A: Yes. We source the full 21000 series range. Provide your exact part number and we will confirm availability and pricing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






