Bently Nevada 21000-16-10-00-041-04-02 Proximity Probe Housing Assembly | Replacement, Equivalent & Selection Guide
The Bently Nevada 21000-16-10-00-041-04-02 is a precision Proximity Probe Housing Assembly designed for industrial vibration and position monitoring systems. This unit is part of the Bently Nevada 21000 Series and is engineered for demanding rotating machinery applications where measurement accuracy and long-term reliability are critical.
Technical Specifications
- Part Number: 21000-16-10-00-041-04-02
- Series: Bently Nevada 21000 Series
- Type: Proximity Probe Housing Assembly
- Probe Tip Diameter: 16 mm
- Cable Length: 1.0 m (extension cable configuration)
- Thread: M10 x 1 (standard metric)
- Temperature Range: -35°C to +177°C (probe tip)
- Sensing Range: 0–2.54 mm (0–100 mil)
- Output: Compatible with 3300 XL / 3500 series proximitor systems
- Material: Stainless steel housing, PTFE-insulated cable
- Weight: Approx. 1,400 g (with cable assembly)
- Approvals: CE, ATEX (consult datasheet for zone classification)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 21000-16-10-00-041-04-02. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 21000-16-10-00-041-04-01 — Same series, shorter cable variant; verify cable length requirement
- Bently Nevada 21000-16-10-00-041-04-03 — Extended cable version; compatible with same proximitor driver
- Bently Nevada 330101-00-06-10-02-00 — 3300 XL 8mm probe; different tip diameter, requires driver recalibration
- Bently Nevada 330130-040-00-00 — 3300 XL 11mm probe; check gap voltage and sensitivity settings
- Epro PR6423/010-040 — Third-party equivalent; compatible with Bently Nevada 3500 system drivers in many installations
- Metrix ST5484E — Alternative proximity transducer; confirm output scale factor (V/mm) before use
Note: Replacement compatibility depends on the target gap, scale factor, and proximitor driver model. Contact Konmask for application-specific guidance.
Why Choose the Original Model
- Factory-calibrated: Each 21000-16-10-00-041-04-02 is calibrated to Bently Nevada’s tight linearity specifications, ensuring accurate gap measurement without field recalibration.
- System-matched: Designed to work seamlessly with Bently Nevada 3300 XL and 3500 Series monitoring systems — no scale factor adjustment required.
- Long service life: Stainless steel housing and PTFE cable insulation resist chemical exposure and high-temperature environments common in turbomachinery installations.
- OEM traceability: Original parts carry full OEM documentation, supporting compliance audits and machinery safety records.
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Compressor rotor position and eccentricity measurement
- Pump and motor bearing proximity sensing
- Gearbox and expander shaft displacement monitoring
- Critical rotating machinery in oil & gas, power generation, and petrochemical plants
System Compatibility
- Proximitor Drivers: Bently Nevada 3300 XL Proximitor, 3500/42M Proximitor I/O Module
- Monitoring Systems: Bently Nevada 3500 Series Machinery Protection System, System 1 Software
- DCS Integration: Compatible with 4–20 mA output modules via appropriate signal conditioners
- Target Material: AISI 4140 steel or equivalent (non-magnetic, non-conductive targets require recalibration)
Selection Guide
Use the following criteria to confirm the correct model for your application:
- Probe tip diameter: 16 mm — suitable for standard turbomachinery bearing housings
- Cable length: Confirm total system cable length (probe + extension + driver) does not exceed system specification (typically 5 m or 9 m system)
- Thread size: M10 x 1 — verify housing thread compatibility before installation
- Gap voltage: Target –10 VDC at nominal gap (1.27 mm / 50 mil) with standard Bently Nevada driver
- Environment: For hazardous area installations, confirm ATEX/IECEx zone classification matches your site requirements
- Replacement scenario: If replacing a failed probe in an existing system, match the full part number to avoid recalibration downtime
Quality Assurance & Sourcing
- All units sourced through authorized distribution channels or verified surplus with full traceability documentation
- Pre-shipment inspection available upon request
- Certificate of Conformance (CoC) provided with each order
- Konmask.com specializes in industrial automation components — we stock both new OEM and tested surplus Bently Nevada parts
How to Order
- Part Number: 21000-16-10-00-041-04-02
- Quantity: Single unit or bulk orders accepted
- Lead Time: In-stock items ship within 1–3 business days; contact us for availability confirmation
- Request a Quote: Email support@konmask.com or call +0086 19859288691
- Online Order: Add to cart directly on this page — secure checkout with international shipping available
Replacement & Compatibility FAQ
Q: Can I use a 3300 XL 8mm probe as a direct replacement?
A: No. The 8mm probe (e.g., 330101 series) has a different tip diameter and scale factor. Substitution requires driver recalibration and housing modification.
Q: Is the Epro PR6423 a drop-in replacement?
A: In many 3500 system installations, yes — but you must verify the output scale factor (V/mm) and connector type match your existing driver configuration.
Q: What is the difference between the -04-01 and -04-02 suffix?
A: The suffix typically denotes cable length or connector configuration. The -04-02 variant is the standard configuration for most 3500 system installations. Contact us to confirm for your specific application.
Q: Do you supply calibration certificates?
A: Yes. OEM calibration documentation is available for new units. For surplus stock, we can arrange third-party calibration verification upon request.
Q: Can Konmask source discontinued or hard-to-find Bently Nevada parts?
A: Yes. Contact our team with your full part number and quantity requirement — we maintain an extensive network for obsolete and legacy Bently Nevada components.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






