Bently Nevada 31000-00-00-00-120-00-02 Proximity Probe Housing Assembly | Replacement, Equivalent & Selection Guide
The Bently Nevada 31000-00-00-00-120-00-02 is a precision-engineered Proximity Probe Housing Assembly designed for continuous vibration and position monitoring in rotating machinery. As an authorized distributor and sourcing specialist, Konmask.com supplies both original and verified-equivalent units to keep your critical assets online.
Technical Specifications
- Part Number: 31000-00-00-00-120-00-02
- Manufacturer: Bently Nevada (Baker Hughes)
- Series: 31000 Proximity Probe Series
- Type: Proximity Probe Housing Assembly
- Sensing Technology: Eddy-current (non-contact)
- Cable Length: 120 inches (approx. 3.05 m)
- Output: Compatible with 3300 XL / 3500 monitoring system signal conditioners
- Weight: Approx. 1,200 g (housing + cable assembly)
- Operating Temperature: –40 °C to +177 °C (probe tip)
- Compliance: CE, RoHS-compatible; designed to API 670 standards
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 330130-080-00-00 – 3300 XL 8 mm Proximity Transducer System (shorter cable; verify signal conditioner match)
- Bently Nevada 330180-X1-05 – 3300 XL 5 mm Proximity Transducer (different tip diameter; confirm gap range)
- Emerson 330104-00-06-10-02-00 – Direct OEM equivalent for select 3500 rack configurations
- Epro PR6423/010-030 – Third-party eddy-current probe; compatible with CON021 signal conditioner
- Metrix ST5484E – Proximity transducer with similar output range; verify connector pinout
Konmask.com recommends confirming compatibility with your system integrator or OEM documentation before ordering a replacement.
Why Choose the Original Model
- OEM Precision: Factory-calibrated gap voltage and sensitivity (–7.87 V/mm typical) for direct drop-in replacement
- System Integrity: Maintains API 670 compliance and Bently Nevada 3500 rack certification
- Traceability: Full OEM documentation and calibration certificates available on request
- Reliability: Proven MTBF in turbine, compressor, and pump monitoring applications
- Warranty: Backed by Konmask.com sourcing guarantee and supplier quality assurance
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing displacement monitoring
- Gearbox and fan shaft orbit analysis
- Critical rotating machinery protected under API 670 / ISO 13373
System Compatibility
- Bently Nevada 3500 Rack System – Primary target platform
- Bently Nevada 3300 XL Monitoring System – Compatible with appropriate signal conditioner
- Bently Nevada 1900/65A – General-purpose vibration monitor (verify input range)
- DCS Integration: Compatible with Emerson DeltaV, Honeywell Experion, ABB 800xA via appropriate I/O modules
Selection Guide
Decode the 31000 series part number to select the correct variant:
- 31000 – Base model: Proximity Probe Housing Assembly
- -00-00-00 – Standard configuration
- -120 – Cable length: 120 inches
- -00-02 – Connector and termination type
Key selection criteria:
- Cable length required (common: 5 ft / 9 ft / 120 in)
- Probe tip diameter (5 mm vs. 8 mm — affects gap range and sensitivity)
- Signal conditioner model in your monitoring rack
- Environmental rating (standard vs. high-temperature or hazardous area)
- Connector type (integral cable vs. extension cable configuration)
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified OEM-surplus channels
- Pre-shipment inspection: visual, dimensional, and functional checks
- Calibration certificates and OEM documentation available upon request
- Anti-counterfeit verification: hologram labels, serial number traceability
- Packaging: original OEM or equivalent ESD-safe protective packaging
How to Order
- Part Number: 31000-00-00-00-120-00-02
- Contact: support@konmask.com | +0086 19859288691
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
- MOQ: 1 unit
- Payment: T/T, PayPal, credit card accepted
- Shipping: DHL / FedEx / UPS worldwide express available
Replacement & Compatibility FAQ
Q: Can I use a 330130 series probe to replace the 31000-00-00-00-120-00-02?
A: Potentially yes, but cable length and connector type differ. Confirm your signal conditioner input range and mounting thread before substituting.
Q: Is this probe compatible with the Bently Nevada 3500/42M position monitor?
A: The 31000 series is primarily designed for the 3300 XL and 3500 rack systems. Verify the specific monitor card input specification against the probe sensitivity (–200 mV/mil).
Q: Do you supply calibration certificates?
A: Yes. OEM calibration documentation is available upon request for all units sourced through Konmask.com.
Q: What is the difference between the 31000 and 330100 series?
A: The 330100 series is the newer 3300 XL generation with updated connector standards. The 31000 series is the legacy platform. Both use eddy-current technology but differ in signal conditioner compatibility.
Q: Can Konmask.com source discontinued or obsolete part numbers?
A: Yes. We specialize in sourcing legacy and obsolete Bently Nevada parts. Contact us with your full part number for availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






