Genuine BENTLY NEVADA 3500/65 145988-02 16-Channel Temperature Monitor | 3500 Series – Verified Source
The BENTLY NEVADA 3500/65 (Part No. 145988-02) is a mission-critical 16-channel temperature monitoring module within the industry-leading 3500 Series machinery protection system. Widely deployed in turbines, compressors, and rotating equipment across oil & gas, power generation, and petrochemical industries, this module is increasingly difficult to source through legitimate channels — making it a prime target for counterfeit and refurbished-as-new substitutes. Purchasing a non-genuine unit risks catastrophic machinery failure, voided OEM warranties, and non-compliance with IEC/API safety standards.
At Konmask.com, every BENTLY NEVADA 3500/65 145988-02 we supply is sourced exclusively from verified OEM-authorized distributors and traceable surplus channels. Each unit undergoes our documented 4-step quality verification process before shipment. We provide genuine, authentic hardware backed by full traceability documentation — so you can install with confidence, not guesswork.
Technical Specifications
- Manufacturer: BENTLY NEVADA (Baker Hughes)
- Part Number: 3500/65 | 145988-02
- Module Type: 16-Channel Temperature Monitor
- Series: 3500 Machinery Protection System
- Input Channels: 16 (thermocouple / RTD compatible)
- Sensor Types Supported: Type J, K, T, E thermocouples; PT100 RTD
- Temperature Range: -200°C to +1372°C (sensor dependent)
- Accuracy: ±1°C typical (per channel)
- Output: 4–20 mA analog, relay outputs, Modbus/RS-485
- Power Supply: 18–30 VDC (from 3500 rack backplane)
- Rack Compatibility: 3500 Series 19-inch rack (3500/05, 3500/15, 3500/25)
- Certifications: CE, SIL 2 (IEC 61508), API 670 compliant
- Operating Temperature: -20°C to +65°C
- Weight: Approx. 750 g
- Country of Origin: USA
Specifications verified against BENTLY NEVADA official documentation (3500/65 Temperature Monitor Manual, Rev. F).
Our 4-Step Quality Verification Process
- Step 1 — Visual & Physical Inspection: Each unit is inspected for OEM label integrity, PCB condition, connector pin alignment, and absence of rework or burn marks. High-resolution photos are taken and archived per serial number.
- Step 2 — Functional Bench Test: The module is powered up in a 3500 Series test rack. All 16 channels are verified for correct signal acquisition, alarm relay actuation, and communication output. Test reports are generated and retained.
- Step 3 — Firmware & Configuration Verification: Firmware version is confirmed against BENTLY NEVADA’s published release history. Configuration memory is checked for factory defaults or documented customer-specific settings.
- Step 4 — Documentation & Traceability Package: Every shipment includes a Certificate of Conformance (COC), Packing List, Country of Origin (COO) Declaration, and optional third-party Test Report. Serial numbers are cross-referenced against known counterfeit databases where applicable.
Key Features & Benefits
- 16 Independent Monitoring Channels: Simultaneous temperature acquisition across all channels with per-channel alarm setpoints — eliminating the need for multiple single-channel modules.
- API 670 & IEC 61508 SIL 2 Compliance: Meets the most stringent machinery protection standards mandated in oil & gas and power generation facilities globally.
- Seamless 3500 Rack Integration: Hot-swap capable within the 3500 Series backplane — minimizing planned maintenance downtime to under 5 minutes per module replacement.
- Multi-Sensor Compatibility: Supports thermocouple types J/K/T/E and PT100 RTD inputs on the same module, reducing spare parts inventory complexity.
- Dual Alarm Relay Outputs: Configurable Alert and Danger relay thresholds per channel, compliant with ISA-18.2 alarm management standards.
- Integrated Self-Diagnostics: Continuous channel health monitoring with fault annunciation — reducing mean time to detect (MTTD) for sensor or wiring failures.
Typical Applications
- Gas Turbines: Exhaust gas temperature (EGT) monitoring across all combustion stages in power generation and pipeline compression stations.
- Steam Turbines: Bearing metal temperature and steam inlet/outlet temperature surveillance in utility and industrial power plants.
- Centrifugal Compressors: Process gas temperature monitoring at suction, discharge, and interstage cooler positions in LNG and refinery service.
- Reciprocating Compressors: Cylinder head and packing temperature monitoring for API 618 compliance in gas gathering and transmission.
- Pumps & Gearboxes: Lube oil and bearing temperature monitoring in large rotating equipment trains in petrochemical and offshore platforms.
- Heat Exchangers & Reactors: Process temperature profiling in critical heat transfer equipment within chemical and refining operations.
Compatible System Components
- 3500/05 Rack Interface Module (RIM)
- 3500/15 Power Supply Module (Standard & Redundant)
- 3500/22M Transient Data Interface (TDI)
- 3500/32 4-Channel Relay Module
- 3500/42M Proximitor / Seismic Monitor
- 3500/92 Communication Gateway Module (Modbus, Profibus, Ethernet)
- Bently Nevada System 1 Evolution Software (condition monitoring platform)
- Compatible thermocouple extension cables and RTD transmitters per OEM specifications
Global Sourcing & Shipping Capabilities
- Primary Service Regions: China Mainland, Hong Kong SAR, Southeast Asia (Singapore, Malaysia, Thailand, Indonesia), Middle East (UAE, Saudi Arabia, Qatar), Europe (Germany, Netherlands, UK), North America (USA, Canada)
- Packaging Standard: Anti-static ESD bag + foam-lined rigid carton + moisture-barrier outer packaging. Fragile/electronic handling labels applied. Gross weight approx. 1.2 kg.
- Shipping Options: DHL Express (3–5 business days worldwide), FedEx International Priority, sea freight consolidation for bulk orders, and bonded warehouse dispatch for time-critical plant shutdowns.
- Export Compliance: All shipments include commercial invoice, packing list, COO declaration, and HS code classification (HS: 9032.89) for smooth customs clearance.
- Lead Time: In-stock units ship within 1–2 business days. Sourcing orders: 7–21 business days depending on region.
Certifications & Compliance Statement
- CE Marking (EU Machinery Directive 2006/42/EC)
- IEC 61508 SIL 2 Functional Safety Certification
- API 670 5th Edition Machinery Protection Systems Compliance
- RoHS 2 Directive (2011/65/EU) Compliant
- ISO 9001:2015 Supply Chain Quality Management (Konmask internal QMS)
Konmask Quality Commitment: We supply only genuine, traceable BENTLY NEVADA hardware. Every unit is documented, tested, and shipped with a Certificate of Conformance. If any unit fails to meet OEM specifications upon receipt, we provide full replacement or refund within 30 days — no questions asked. Our sourcing integrity is the foundation of every transaction.
How to Order
- Step 1 — Submit Your Inquiry: Contact us via the product page, email [email protected], or WhatsApp +0086 19859288691 with your part number, required quantity, and delivery timeline.
- Step 2 — Receive Quote & Documentation Preview: Within 24 hours, we will provide a formal quotation, stock availability confirmation, and a preview of available documentation (COC, test report, photos).
- Step 3 — Confirm & Ship: Upon order confirmation and payment, your unit is re-inspected, packaged to ESD standards, and dispatched with full shipping documentation and tracking.
Sample units and third-party test reports available upon request for qualified buyers. Minimum order quantity: 1 unit.
Authenticity & Trust FAQ
-
Q: How can I verify the unit I receive is genuine BENTLY NEVADA?
A: Every unit ships with a Certificate of Conformance (COC) referencing the serial number, part number, and our verification process. You can cross-reference the serial number with BENTLY NEVADA’s authorized service network. We also provide high-resolution pre-shipment photos of the actual unit upon request. -
Q: What is your warranty policy?
A: All units carry a 12-month warranty against defects in materials and workmanship from the date of shipment. If a unit fails under normal operating conditions within this period, we will replace it or issue a full refund. Extended warranty options are available for long-term maintenance contracts. -
Q: Can you provide a third-party test report or COC before I place an order?
A: Yes. For qualified buyers and larger orders, we can provide a sample COC, functional test report summary, and pre-shipment inspection photos prior to order confirmation. Contact us to request documentation samples.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
