Bently Nevada 330103-00-18-05-02-00 – Eddy Current Proximity Transducer | 3300 XL Series
The Bently Nevada 330103-00-18-05-02-00 is a high-precision eddy current proximity transducer engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in critical rotating machinery. As a core component of the 3300 XL Proximity Transducer System, it delivers the measurement accuracy and long-term reliability demanded by petrochemical, power generation, and heavy industrial operators worldwide.
Procurement engineers sourcing replacement or spare-parts inventory for Bently Nevada 3300-series monitoring systems will find this transducer a direct, OEM-specification-compliant solution — no recalibration of the monitoring rack required.
Complete Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330103-00-18-05-02-00 |
| Series / Platform | Bently Nevada 3300 XL Proximity Transducer System |
| Measurement Principle | Eddy Current (Non-contact) |
| Measurement Range | 0 – 90 mil pp (0 – 2.286 mm pp) |
| Scale Factor | 200 mV/mil (7.87 V/mm) |
| Probe Tip Diameter | 8 mm (0.315 in) |
| Cable Length | 18 in (457 mm) |
| Extension Cable | 5 m |
| Driver / Oscillator | 3300 XL 8mm Proximitor Sensor (separate order) |
| Target Material | AISI 4140 Steel (standard) |
| Operating Temperature | -50 C to +177 C (probe); -35 C to +85 C (driver) |
| Supply Voltage | -24 VDC (nominal) |
| Output Signal | -2 VDC to -20 VDC (linear range) |
| Frequency Response | DC to 10,000 Hz (-3 dB) |
| Connector Type | Armor-jacketed coaxial, TNC |
| Ingress Protection | IP67 (probe body) |
| Agency Approvals | CE, ATEX, FM |
| Weight | Approx. 40 g |
Proven Application Environments
- Steam & Gas Turbines — shaft radial vibration and thrust position monitoring per API 670
- Centrifugal Compressors — continuous rotor dynamic surveillance in high-pressure trains
- Pumps & Fans — early-warning vibration detection to prevent unplanned downtime
- Gearboxes — gear mesh frequency and bearing defect monitoring
- Hydro Turbines — axial position and differential expansion measurement
- Marine Propulsion Systems — shaft alignment and vibration trending
Engineering Advantages
- Non-contact measurement — zero mechanical wear, suitable for continuous 24/7 operation
- Wide temperature range — qualified for hot-section and cryogenic installations
- Direct system compatibility — plug-and-play replacement within existing 3300 XL monitoring racks
- High EMI immunity — armored coaxial cable construction rejects electrical noise in VFD-dense environments
- API 670 compliant — meets the machinery protection standard for critical turbomachinery
- Long-term signal stability — factory-calibrated scale factor maintained over service life
System Architecture & Signal Flow
The 330103-00-18-05-02-00 operates as part of a three-component measurement chain:
- Probe (330103-00-18-05-02-00) — generates the eddy current field and senses gap changes at the shaft surface.
- Extension Cable — 5 m armored coaxial cable transmits the high-frequency oscillator signal between probe and driver with minimal loss.
- Proximitor Driver / Oscillator — conditions the signal and outputs a DC voltage proportional to gap distance, fed directly to the 3300 monitoring rack or DCS analog input.
The linear output range of -2 V to -20 V maps directly to the 0-90 mil measurement span, enabling straightforward scaling in any PLC or DCS historian.
Sourcing & Quality Verification
- All units sourced through authorized distribution channels or verified surplus with full traceability documentation.
- Each transducer undergoes incoming inspection: visual, dimensional, and electrical continuity checks prior to dispatch.
- Original manufacturer labeling, date codes, and serial numbers preserved and documented.
- Certificate of Conformance (CoC) available upon request.
- Packaging: anti-static foam insert, moisture-barrier bag, outer carton with part number label.
Procurement Process
- Confirm compatibility — verify your existing Proximitor driver model and extension cable length match the -18-05- configuration.
- Request a quote — contact support@konmask.com for volume pricing, lead time, and CoC availability.
- Place order — secure checkout via Konmask.com; payment by T/T, credit card, or PayPal accepted.
- Shipping — DHL / FedEx express worldwide; export documentation (commercial invoice, packing list, HS code 9031.80) included.
- After-sales support — 12-month warranty against manufacturing defects; technical support via email or WhatsApp.
Technical FAQ
Q: Is the 330103-00-18-05-02-00 compatible with the 3500 monitoring system?
A: No. The 3300 XL transducer system uses a different Proximitor driver than the 3500 series. Confirm your rack model before ordering.
Q: Can this probe measure non-steel targets?
A: Yes, but the scale factor will differ. Bently Nevada provides target material correction factors; contact us for application-specific calibration data.
Q: What is the minimum gap for linear operation?
A: The linear range begins at approximately 10 mil (0.25 mm) gap. Operation below this threshold may produce non-linear output.
Q: Do you supply the complete system (probe + cable + driver)?
A: Yes. Contact us to configure a complete 3300 XL system bundle with matched components.
Q: Is ATEX certification included?
A: ATEX approval applies to specific sub-variants. Confirm the hazardous-area listing with your order if required for your installation.
2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






