Bently Nevada 330103-00-24-05-01-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330103-00-24-05-01-00 is a high-precision eddy-current proximity transducer system from the 3300 XL Series, engineered for continuous vibration, position, and speed monitoring in rotating machinery. Sourced and supplied by Konmask.com — your trusted industrial automation parts partner.
Technical Specifications
- Part Number: 330103-00-24-05-01-00
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL Proximity Transducer System
- Sensing Technology: Eddy-Current (Non-contact)
- Cable Length: 24 inches (approx. 610 mm) — encoded in part number position 3
- Extension Cable: 5 meters — encoded in part number position 4
- Driver Type: Standard (01) — compatible with 3300 XL Proximitor® Sensor
- Target Material: Steel / Stainless Steel (AISI 4140 reference)
- Output Signal: –24 VDC nominal bias voltage; linear voltage output proportional to gap
- Frequency Range: DC to 10,000 Hz
- Operating Temperature: –35°C to +121°C (probe); –35°C to +85°C (Proximitor)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm to 2.26 mm (10 mil to 89 mil)
- Connector: Integral coaxial, armored cable
- Approvals: CE, FM, CSA, ATEX (intrinsically safe options available)
- Weight: ~40 g (probe assembly)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330103-00-24-05-01-00. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 330103-00-24-10-01-00 — Same probe, 10 m extension cable (drop-in for longer cable runs)
- Bently Nevada 330103-00-24-05-02-00 — High-temperature driver variant
- Bently Nevada 330104-00-24-05-01-00 — 3300 XL 8 mm probe, same cable config (check gap range)
- Bently Nevada 330180-91-00 — 3300 XL Proximitor Sensor (required driver module)
- Epro PR6423/010-040 — Third-party eddy-current transducer, compatible signal output; verify connector and sensitivity
- Metrix ST5484E — Alternative proximity transducer; confirm system compatibility with Bently Nevada monitors
Note: Konmask.com recommends using genuine Bently Nevada components for safety-critical machinery monitoring. Contact us for cross-reference verification.
Why Choose the Original Model
- Certified Accuracy: Factory-calibrated to API 670 standards for machinery protection systems
- System Integration: Plug-and-play with Bently Nevada 3300, 3500, and System 1 platforms
- Long-term Reliability: Proven MTBF in continuous 24/7 industrial environments
- OEM Traceability: Full documentation, calibration certificates, and warranty support
- Hazardous Area Ratings: ATEX/FM certified versions available for Zone 1/Division 1 installations
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing displacement monitoring
- Gearbox speed and phase reference measurement
- Petrochemical, power generation, and LNG plant rotating equipment
- API 670-compliant machinery protection systems
System Compatibility
- Bently Nevada 3300 XL Proximitor Sensor (330180 series) — Primary driver
- Bently Nevada 3500 Monitoring System — 3500/42M, 3500/40M modules
- Bently Nevada System 1 — Condition monitoring software integration
- DCS / PLC Integration: 4–20 mA or voltage output via signal conditioner; compatible with Siemens, ABB, Emerson DeltaV, Honeywell
- Target Materials: Carbon steel, 4140 alloy steel (non-magnetic stainless requires recalibration)
Selection Guide
Use the part number structure to select the correct configuration:
- 330103 — 3300 XL 5 mm proximity probe
- 00 — Standard configuration
- 24 — Probe cable length: 24 inches
- 05 — Extension cable length: 5 meters
- 01 — Driver: Standard 3300 XL Proximitor
- 00 — No special options
Need a different cable length, high-temperature rating, or ATEX certification? Contact Konmask.com for custom configuration sourcing.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus with full traceability
- Pre-shipment inspection: visual, dimensional, and functional checks
- Original packaging and documentation preserved where available
- Anti-counterfeit verification available on request
- Export compliance: EAR/ECCN classification reviewed for international orders
How to Order
- Online: Add to cart directly on this page
- Email RFQ: support@konmask.com — include quantity, required delivery, and destination
- Phone/WhatsApp: +0086 19859288691
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
- Payment: T/T, PayPal, credit card, and trade assurance accepted
Replacement & Compatibility FAQ
Q: Can I use a third-party proximity probe with my Bently Nevada 3500 monitor?
A: Possibly, but the system must be recalibrated. Bently Nevada monitors are optimized for their own transducer systems. Third-party probes may trigger false alarms or void certifications.
Q: What is the difference between 330103 and 330104?
A: The 330103 is a 5 mm diameter probe; the 330104 is an 8 mm probe with a wider linear range. Selection depends on shaft diameter and gap requirements.
Q: How do I decode the full part number?
A: See the Selection Guide section above. Each segment encodes probe type, cable length, extension length, and driver compatibility.
Q: Is this part available with ATEX certification?
A: Yes. Contact us with your hazardous area classification (Zone/Division, gas group, temperature class) for the correct certified variant.
Q: Can Konmask.com provide a calibration certificate?
A: Yes, calibration certificates are available for new units. For surplus stock, functional test reports are provided.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






