EPRO PR6423/010-110-CN CON021 Eddy Current Sensor Module | Replacement, Equivalent & Selection Guide
The EPRO PR6423/010-110-CN CON021 is a high-precision eddy current sensor module designed for non-contact displacement and vibration measurement in industrial rotating machinery. As an authorized sourcing partner, Konmask.com supplies genuine and compatible units for critical condition monitoring applications.
Technical Specifications
- Manufacturer: EPRO (Baker Hughes / Bently Nevada compatible series)
- Part Number: PR6423/010-110-CN
- Conditioner: CON021
- Sensor Type: Eddy Current (Non-contact)
- Measurement: Radial vibration, axial displacement, differential expansion
- Probe Cable Length: 1.0 m (010 = 1.0 m)
- Extension Cable: 110 (11.0 m standard)
- Output Signal: -24 VDC nominal (standard Bently Nevada compatible)
- Frequency Range: 0 – 10,000 Hz
- Operating Temperature: -40°C to +120°C (probe); -20°C to +70°C (conditioner)
- Protection Rating: IP67 (probe)
- Country of Origin: Germany
- Weight: ~500 g (complete assembly)
Compatible Replacement & Equivalent Models
The following models are functionally equivalent or drop-in replacements for the PR6423/010-110-CN CON021. Always verify gap voltage, sensitivity, and cable length before substitution.
- Bently Nevada 330101-00-06-10-02-00 – 3300 XL 8mm probe, direct functional equivalent
- EPRO PR6423/010-100-CN CON021 – Same probe, 10.0 m extension cable variant
- EPRO PR6423/005-110-CN CON021 – 0.5 m probe cable variant
- EPRO PR6424/010-110-CN CON021 – 14 mm probe diameter upgrade for larger shaft clearances
- Emerson CSI 6500 compatible probes – Signal-compatible with CON021 conditioner output
- Metrix ST5484E – Alternative eddy current transmitter for retrofit applications
Contact Konmask.com for cross-reference verification before ordering a replacement.
Why Choose the Original EPRO PR6423/010-110-CN CON021
- Factory-calibrated sensitivity: 8 mV/µm (200 mV/mil) — no field recalibration required
- Certified for use with EPRO MMS 6000 and CON021 signal conditioner systems
- Traceable quality documentation and material certificates available
- Long-term availability through Konmask.com authorized sourcing network
- Proven reliability in power generation, petrochemical, and compressor train applications
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial displacement measurement
- Pump and motor bearing condition monitoring
- Gearbox differential expansion measurement
- OEM machinery protection systems requiring API 670 compliance
System Compatibility
- EPRO MMS 6000 – Native integration, plug-and-play
- Bently Nevada 3500 Series – Signal-compatible with CON021 output (-24 VDC)
- Emerson AMS 6500 – Compatible via standard 4–20 mA or voltage output interface
- Yokogawa CENTUM VP / CS 3000 – Via signal conditioning interface module
- Siemens SPPA-T3000 – Compatible with standard eddy current input cards
Selection Guide
Use the table below to select the correct PR6423 variant for your application:
- Probe cable length (XXX): 005 = 0.5 m | 010 = 1.0 m | 020 = 2.0 m
- Extension cable (YYY): 050 = 5.0 m | 100 = 10.0 m | 110 = 11.0 m | 150 = 15.0 m
- Target material: Steel (standard) — specify if stainless, titanium, or non-ferrous
- Conditioner: CON021 (standard) | CON011 (legacy) | CON031 (high-temp)
- Shaft diameter: PR6423 (8 mm probe) suits shafts ≥ 50 mm; use PR6424 for larger clearances
Not sure which variant fits your system? Send us your DCS/PLC drawing and we will confirm the correct part number.
Quality Assurance & Sourcing
- All units sourced through verified industrial supply channels
- Pre-shipment inspection: visual, dimensional, and functional checks
- Original manufacturer packaging preserved where available
- Batch traceability records maintained for 5 years
- Export compliance: ECCN classification reviewed per order destination
How to Order
- Confirm part number: PR6423/010-110-CN CON021
- Specify quantity and required delivery timeline
- Submit your PO or inquiry to support@konmask.com
- Receive proforma invoice with lead time and shipping options (DHL / FedEx / sea freight)
- Payment: T/T, PayPal, or trade assurance — confirm with sales team
Replacement & Compatibility FAQ
Q: Can I use PR6423/010-110-CN with a Bently Nevada 3500/42M module?
A: Yes. The CON021 conditioner outputs a -24 VDC signal compatible with Bently Nevada 3500 series proximity inputs. Verify gap voltage setting (typically -10 VDC at nominal gap).
Q: What is the difference between CON021 and CON011?
A: CON021 is the current-generation conditioner with improved EMI shielding and wider temperature range. CON011 is the legacy version; both are signal-compatible but CON021 is recommended for new installations.
Q: Is the PR6423/010-110-CN suitable for high-temperature environments?
A: The probe is rated to +120°C. For applications above this, consider the PR6424 high-temperature variant or contact us for application engineering support.
Q: Can Konmask.com supply the complete probe-cable-conditioner kit?
A: Yes. We supply complete kits (probe + extension cable + CON021 conditioner) as well as individual components. Specify your requirement when ordering.
Q: Do you provide a warranty?
A: All units carry a 12-month warranty against manufacturing defects from the date of shipment. Warranty claims are processed within 5 business days.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
