FUJIKURA 1886-455368-11 RF Coaxial Cable Assembly 52FT | Replacement, Equivalent & Selection Guide
The FUJIKURA 1886-455368-11 (also referenced as P/N 716-140139-313, assembly codes 2800/3000, catalog ref 156403, and internal designation 17E181W412G1) is a precision 52-foot RF coaxial cable assembly engineered for demanding telecommunications, broadcast, and industrial RF signal distribution applications. Konmask.com supplies genuine and compatible-equivalent units with full traceability.
Technical Specifications
- Manufacturer: FUJIKURA
- Part Number: 1886-455368-11
- Cross Reference P/N: 716-140139-313
- Assembly Series: 2800 / 3000
- Catalog Reference: 156403
- Internal Designation: 17E181W412G1
- Cable Length: 52 FT (approx. 15.85 m)
- Cable Type: RF Coaxial Cable Assembly
- Application: RF signal transmission, telecom infrastructure, broadcast systems
- Connector Style: Per OEM specification (confirm at order)
- Impedance: 50 Ω (standard RF coaxial)
- Shielding: Multi-layer foil + braid (OEM spec)
Compatible Replacement & Equivalent Models
When the original FUJIKURA 1886-455368-11 is unavailable or discontinued, the following cross-references and functional equivalents may apply (verify electrical and mechanical specs before substitution):
- FUJIKURA 716-140139-313 (alternate P/N, same assembly)
- FUJIKURA 156403 (catalog reference unit)
- FUJIKURA 17E181W412G1 (internal designation variant)
- Generic 52FT 50Ω RF coaxial assemblies with matching connector terminations
- Custom-length assemblies cut to 52FT from FUJIKURA bulk coaxial stock
Contact Konmask.com for verified cross-reference confirmation before ordering a replacement.
Why Choose the Original Model
- OEM-grade signal integrity: Manufactured to FUJIKURA’s exacting RF performance standards, minimizing insertion loss and VSWR.
- Pre-terminated assembly: Factory-terminated connectors eliminate field crimping errors and ensure repeatable performance.
- Exact-length 52FT: Purpose-built cable run length reduces excess cable management and signal degradation from unnecessary coils.
- Multi-series compatibility: Validated for use in FUJIKURA 2800 and 3000 series system architectures.
- Full traceability: Dual P/N cross-referencing (1886-455368-11 / 716-140139-313) supports MRO and spare-parts documentation.
Typical Applications
- Telecommunications base station RF feeder runs
- Broadcast antenna distribution systems
- Industrial RF signal routing in automation and SCADA environments
- Test & measurement lab cable assemblies
- Microwave link and point-to-point radio installations
- MRO replacement in FUJIKURA 2800/3000 series equipment racks
System Compatibility
- FUJIKURA 2800 Series – Validated OEM fit
- FUJIKURA 3000 Series – Validated OEM fit
- Third-party RF systems – Compatible where 50Ω impedance and matching connector interface are confirmed
Always verify connector type, impedance, and frequency rating against your system’s RF port specifications before installation.
Selection Guide
Use the following criteria to confirm this assembly is the correct choice for your application:
- Required cable length: 52 FT / ~15.85 m — if a different length is needed, contact us for custom assemblies.
- System series: FUJIKURA 2800 or 3000 — confirm your rack/chassis model.
- Connector interface: Match OEM connector type on both ends (request datasheet if uncertain).
- Frequency range: Confirm your operating frequency falls within the assembly’s rated bandwidth.
- Replacement vs. upgrade: For like-for-like MRO replacement, use P/N 1886-455368-11 or 716-140139-313. For upgraded performance, consult our technical team.
Quality Assurance & Sourcing
- Units sourced from authorized distributors and verified surplus channels
- Each assembly inspected for connector integrity and cable jacket condition prior to dispatch
- Dual P/N verification against FUJIKURA documentation
- Packaging preserves connector terminations during transit
- Certificate of conformance available upon request for critical installations
How to Order
- Confirm your system model (FUJIKURA 2800 or 3000 series) and required P/N (1886-455368-11 or 716-140139-313).
- Add to cart or contact support@konmask.com for bulk pricing or lead-time inquiry.
- Provide your shipping destination — we ship globally from China.
- Request a certificate of conformance or datasheet if required for your procurement process.
Replacement & Compatibility FAQ
Q: Is 716-140139-313 the same as 1886-455368-11?
A: Yes — these are dual manufacturer part numbers referencing the same FUJIKURA RF coaxial cable assembly.
Q: Can I use a generic 52FT coaxial cable as a replacement?
A: Only if the connector type, impedance (50Ω), and frequency rating match. OEM assemblies are recommended for critical RF paths.
Q: Is this compatible with FUJIKURA 3000 series systems?
A: Yes, the assembly is listed for both 2800 and 3000 series. Verify your specific chassis port before installation.
Q: Do you offer custom cable lengths?
A: Contact us — we can source or fabricate assemblies in non-standard lengths based on your requirements.
Q: What is the lead time?
A: In-stock units ship within 1–3 business days. Out-of-stock items typically have a 2–4 week lead time. Contact us for current availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
