Call: +86 19859288691 Email: support@konmask.com
EN PLC, DCS, HMI and drive spare parts RFQ support
Konmask
HomeProductsBrandsSeriesAbout UsNewsFast Quote
Quote Request
Skip to content
  • Large inventory and sourcing network. Stock items can ship in 1-2 business days. | TEL: +0086 19859288691 or via E-MAIL: support@konmask.com
  • About Us
  • Request a Fast Quote
  • FAQs
  • Large inventory and sourcing network. Stock items can ship in 1-2 business days. | TEL: +0086 19859288691 or via E-MAIL: support@konmask.com
KonmaskKonmask
  • +86 19859288691
    support@konmask.com
  • home
  • PRODUCTS
  • brands
    • Bently Nevada
    • GE Fanuc
    • Honeywell
    • ABB
    • Schneider
    • YOKOGAWA
    • Allen-Bradley
    • ICS Triplex
    • Emerson
    • HIMA
    • More Brand
  • Series
    • Bently Nevada 3300 XL Series
    • Bently Nevada NSv Series
    • GE Fanuc Mark VI
    • ABB AC 800M
    • Bently Nevada 3500 Series
    • Bently Nevada 3300 Series
    • Honeywell Experion PKS
    • Honeywell TDC 3000
    • Siemens SINAMICS
    • Emerson DeltaV
    • Allen-Bradley ControlLogix
    • Schneider Modicon
  • About Us
  • News
  • Request a Fast Quote
  • Refund Policy
  • Shipping Policy
Genuine General Electric 469-P5-HI-A20-E-H - Industrial Automation Part
General Electric 469-P5-HI-A20-E-H - Front Panel and Connectivity View
General Electric 469-P5-HI-A20-E-H - Technical Label and Specifications
Genuine General Electric 469-P5-HI-A20-E-H - Industrial Automation Part
General Electric 469-P5-HI-A20-E-H - Front Panel and Connectivity View
General Electric 469-P5-HI-A20-E-H - Technical Label and Specifications
Home / GE Fanuc

GE | 469-P5-HI-A20-E-H | Motor Management Relay

  • Genuine General Electric IC694ALG221A - Industrial Automation Part
  • Genuine General Electric 531X300CCHAFM5 - Industrial Automation Part

Request a Fast QuoteEmail Directly
SKU: 469-P5-HI-A20-E-H Category: GE Fanuc Tags: 469-P5-HI-A20-E-H, GE, Motor Management Relay, Motor Protection, Multilin
  • Genuine General Electric IC694ALG221A - Industrial Automation Part
  • Genuine General Electric 531X300CCHAFM5 - Industrial Automation Part
Browse
  • ABB
  • ADLINK
  • Advanced Energy
  • Advantech
  • Alfa Laval
  • Allen-Bradley
  • Alstom
  • AMCI
  • Applied Materials
  • ASML
  • Atos
  • B&R
  • Bachmann
  • Balluff
  • Basler
  • Baumer
  • Baumuller
  • Beckhoff
  • Bender
  • Bently Nevada
  • Berger Lahr
  • Bombardier
  • Bosch Rexroth
  • Brooks Instrument
  • Carlo Gavazzi
  • Control Techniques
  • Danfoss
  • Deep Sea Electronics
  • DELL
  • Delta
  • Eaton
  • ELAU
  • Emerson
  • EMG
  • Endress+Hauser
  • ENTEK
  • EPRO
  • ETEL
  • Fagor
  • Faiveley
  • Fanuc
  • Fisher
  • Fluke
  • Force Computers
  • Foxboro
  • FUJI
  • GE Fanuc
  • HEIDENHAIN
  • Hengstler
  • HIMA
  • Hirschmann
  • Hitachi
  • HMS
  • Hollysys
  • Honeywell
  • Horner
  • Hurco
  • ICS Triplex
  • Industronic
  • Invensys Triconex
  • Jetter
  • Kawasaki
  • KEBA
  • Kollmorgen
  • Kongsberg
  • Kontron
  • KUKA
  • Kulicke & Soffa
  • Lam Research
  • Lauer
  • Lenze
  • Littelfuse
  • LTI Motion
  • LUST
  • Metso
  • Mitsubishi
  • MKS Instruments
  • Moeller
  • Molex
  • MOOG
  • Moore
  • Motorola
  • MTL
  • Murphy
  • N-Tron
  • Neles
  • New Arrival
  • NI
  • Nikon
  • Novellus
  • OMRON
  • Ono Sokki
  • Other Parts
  • Ovation
  • Pacific Scientific
  • Panasonic
  • Parker
  • Pepperl+Fuchs
  • PHILIPS
  • Phoenix
  • Pilz
  • Pro-face
  • Prosoft
  • ProvibTech
  • Radisys
  • Reliance Electric
  • Robicon
  • Rofin
  • Rosemount
  • RTP
  • SAIA
  • Sanyo Denki
  • Schneider
  • Seica
  • Semikron
  • Serad
  • SEW-Eurodrive
  • Sharp
  • SICK
  • Siemens
  • SIGMATEK
  • SIPOS
  • SST
  • STAHL
  • Sumitomo
  • Tektronix
  • TMEIC
  • Tokyo Electron
  • Toshiba
  • Turck
  • UniOP
  • Vaisala
  • Varian
  • VAT
  • Vibro-Meter
  • VIPA
  • WAGO
  • Wartsila
  • Weidmuller
  • Westinghouse
  • Woodward
  • Xycom
  • Yaskawa
  • YOKOGAWA
  • Description

GE 469-P5-HI-A20-E-H – Advanced Motor Management Relay | Multilin 469 Series

Engineering Background

The GE Multilin 469 series represents General Electric’s flagship solution for comprehensive motor protection and management in industrial environments. Designed for medium-to-large induction motors, the 469 platform integrates thermal modeling, current-based protection, and advanced diagnostics into a single DIN-rail or panel-mount unit. The 469-P5-HI-A20-E-H variant is configured with high-current CT inputs, analog I/O expansion, Ethernet communications, and a high-visibility display — making it the preferred choice for critical motor assets in process industries.

Product Positioning

This relay is engineered for procurement engineers and system integrators who require a proven, IEC/ANSI-compliant motor protection device with full SCADA integration capability. It replaces legacy electromechanical overload relays and standalone protection devices with a single, intelligent unit that reduces panel footprint, wiring complexity, and commissioning time.

Complete Technical Specifications

  • Model: 469-P5-HI-A20-E-H
  • Manufacturer: General Electric (GE Multilin)
  • Series: Multilin 469 Motor Management Relay
  • CT Input Range (HI): 1–12 A (high-current input, suitable for 1 A or 5 A secondary CTs)
  • Auxiliary Power Supply: 20–60 V DC / 20–48 V AC (A20 designation)
  • Communications: Ethernet (E designation) — Modbus TCP/IP, DNP3 over TCP
  • Display: High-visibility backlit LCD (H designation)
  • Analog I/O: Expanded analog I/O module (P5 designation)
  • Protection Functions: Thermal overload (49), Overcurrent (50/51), Ground fault (50G/51G), Undercurrent (37), Phase unbalance (46), Phase reversal (47), Stall/locked rotor (48/14), Starts-per-hour (66), RTD-based thermal protection (38/49)
  • RTD Inputs: Up to 12 RTD inputs (motor winding, bearing, ambient)
  • Output Relays: 5 programmable output relays
  • Digital Inputs: 8 optically isolated digital inputs
  • Metering: 3-phase current, ground current, thermal capacity, power (kW, kVAR, kVA, PF), energy (kWh)
  • Data Logging: Event recorder (last 256 events), oscillography (waveform capture)
  • Mounting: Panel flush-mount, 1/2 DIN cutout
  • Operating Temperature: -20°C to +60°C
  • Weight: 7.36 kg
  • Standards: IEC 60255, ANSI/IEEE C37.90, CE, UL, CSA

Proven Application Environments

  • Oil & Gas: Compressor motors, pump drives, and wellhead motor protection in upstream and midstream facilities
  • Water & Wastewater: High-duty-cycle pump motors requiring starts-per-hour limiting and thermal modeling
  • Mining & Minerals: Conveyor drives, crusher motors, and mill drives subject to frequent starts and high inertia loads
  • Pulp & Paper: Refiner and agitator motors with RTD winding temperature monitoring
  • Power Generation: Auxiliary motor protection in thermal and hydro plants
  • Chemical & Petrochemical: Hazardous-area motor feeders requiring ground fault sensitivity and SCADA integration

Engineering Advantages

  • Adaptive Thermal Model: Accounts for motor heating history, ambient temperature (via RTD), and cooling curves — preventing nuisance trips while protecting against genuine overloads
  • Ethernet Native: Modbus TCP/IP and DNP3 over TCP eliminate the need for serial-to-Ethernet converters, simplifying DCS/SCADA integration
  • Oscillography: On-board waveform capture enables post-fault analysis without external power quality meters
  • RTD Multiplexing: Up to 12 RTDs on a single relay eliminates separate temperature monitoring modules
  • Reduced Panel Footprint: Consolidates overload relay, ground fault relay, temperature monitor, and power meter into one 1/2 DIN unit
  • Firmware Upgradeable: Field-upgradeable firmware via EnerVista 469 Setup software

System Architecture & Signal Flow

The 469-P5-HI-A20-E-H sits at the motor feeder level within the protection hierarchy:

  • Upstream: MCC bus / switchgear breaker → 469 trip output → contactor/breaker trip coil
  • CT Inputs: Phase CTs (1 A or 5 A secondary, HI range) + core-balance or residual ground CT → 469 current inputs
  • RTD Inputs: Motor winding RTDs (Pt100) + bearing RTDs → 469 RTD module
  • Communications: 469 Ethernet port → plant LAN → DCS/SCADA (Modbus TCP or DNP3)
  • Analog Outputs: 4–20 mA analog outputs → DCS analog input cards (current, thermal capacity, power)
  • Digital Inputs: Motor running feedback, emergency stop, external trip → 469 digital inputs

Sourcing & Quality Verification

  • All units sourced from authorized GE Multilin distributors or verified OEM surplus channels
  • Each unit inspected for firmware version, hardware revision, and physical condition prior to listing
  • Serial number traceability available upon request for critical applications
  • Calibration certificates and factory test reports available for select stock
  • Konmask.com maintains a zero-counterfeit policy — units failing authentication are rejected and not listed

Procurement Process

  • Step 1: Submit inquiry via product page or email support@konmask.com with your project BOM and required delivery date
  • Step 2: Receive stock confirmation, lead time, and formal quotation within 1 business day
  • Step 3: Issue PO against quotation; payment via T/T, L/C, or approved credit terms
  • Step 4: Unit ships with commercial invoice, packing list, and optional test report
  • Step 5: Post-delivery technical support available via email or WhatsApp (+86 198 5928 8691)

Technical FAQ

Q: What is the difference between the HI and LO current input versions?
A: The HI version accepts 1–12 A CT secondary input, suitable for standard 1 A or 5 A CTs. The LO version accepts 0.1–1.2 A, used with low-ratio CTs on small motors. The 469-P5-HI-A20-E-H uses HI inputs.

Q: Is the A20 power supply compatible with 24 V DC control power?
A: Yes. The A20 auxiliary supply range is 20–60 V DC, making it fully compatible with 24 V DC and 48 V DC control power systems.

Q: Can this relay communicate with a Modbus RTU DCS?
A: The E (Ethernet) variant supports Modbus TCP/IP natively. For Modbus RTU, a Modbus TCP-to-RTU gateway is required, or specify the RS485 variant (469-P5-HI-A20-A-H) at time of order.

Q: What software is required for configuration?
A: GE EnerVista 469 Setup software (free download from GE Grid Solutions). Configuration can also be performed via the front-panel keypad and display.

Q: Is a warranty available?
A: Konmask.com offers a 12-month functional warranty on all verified units. Extended warranty and on-site commissioning support available upon request.


© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691

Related products

Genuine GE IS200EXHSG4A Mark VI Excitation Control - Industrial Automation Part

GE Fanuc

GE IS200EXHSG4A Static Exciter Terminal Board | Mark VI Excitation Control

Request a Fast Quote
Genuine GE IS200VCRCH1B Mark VI Turbine Control System - Industrial Automation Part

GE Fanuc

GE IS200VCRCH1B Digital Card | Mark VI Turbine Control

Request a Fast Quote
Genuine General Electric IC697BEM731 - Industrial Automation Part

GE Fanuc

GE | IC697BEM731 | Bus Controller Module

Request a Fast Quote
Genuine General Electric DS200ADGIH1AAA - Industrial Automation Part

Other Parts

Genuine GE DS200ADGIH1AAA Auxiliary Interface Board | Mark VI Series – Verified Source

Request a Fast Quote
Genuine GE VIPC616 - Industrial Automation Part

GE Fanuc

GE | VIPC616 | VME Carrier Card 4-Slot RF Filtering

Request a Fast Quote
Genuine GE VMIPCI-5565-110000 PCI-5565 Reflective Memory Node - Industrial Automation Part

GE Fanuc

GE VMIPCI-5565-110000 Reflective Memory Interface | PCI-5565 Series

Request a Fast Quote
Genuine General Electric IC670MDL740 GE Series 90-70 PLC - Industrial Automation Part

Other Parts

Genuine GE IC670MDL740 Discrete Output Module | Series 90-70 – Verified Source

Request a Fast Quote
Genuine General Electric IC697MDL653 - Industrial Automation Part

GE Fanuc

GE | IC697MDL653 | Discrete Input Module

Request a Fast Quote
Fast Delivery

Quick and efficient shipping to meet your tight schedules.

Comprehensive Stock

A wide range of products readily available for immediate dispatch.

Guaranteed Quality

Authentic and reliable PLC & DCS parts you can trust.

Worldwide Reach

Providing exceptional support and service to clients across the globe.

Our newsletter

Subscribe to our newsletter and receive special offers

Our newsletter

Subscribe to our newsletter and receive special offers

Konmask

 

With an unparalleled inventory of new and

surplus parts, Konmask is your trusted

partner in reducing downtime and keeping

your operations running smoothly.

Top Brands

ABB
Allen-Bradley
Bently Nevada
Emerson
GE Fanuc
Honeywell
Invensys Triconex
Yokogawa
HIMA

Hot Categories

Cable
Drives
I/O Module
Rack/Chassis/Backplane
Sensors
Turbine Control/Protection
HMI/Panel View
More & Other

Support & Contact

About Us
FAQ
Contact Us
Privacy Policy
Refund Policy
Shipping Policy
Terms of Service
Copyright 2026 © konmask
Konmask

Industrial automation spare parts sourcing for PLC, DCS, HMI, drives, sensors and legacy control systems.

RFQ desk Call +86 19859288691 Email support@konmask.com WhatsApp sourcing desk

Quick Links

Products Brands Series Request Quote

Solutions

PLC Modules HMI Panels Servo Drives Sensors

Company

About Konmask News FAQs Contact

Policies

Shipping Policy Refund Policy Privacy Policy
Konmask.com Send model number, brand, quantity and destination country for a fast sourcing check.
  • home
  • PRODUCTS
  • brands
    • Bently Nevada
    • GE Fanuc
    • Honeywell
    • ABB
    • Schneider
    • YOKOGAWA
    • Allen-Bradley
    • ICS Triplex
    • Emerson
    • HIMA
    • More Brand
  • Series
    • Bently Nevada 3300 XL Series
    • Bently Nevada NSv Series
    • GE Fanuc Mark VI
    • ABB AC 800M
    • Bently Nevada 3500 Series
    • Bently Nevada 3300 Series
    • Honeywell Experion PKS
    • Honeywell TDC 3000
    • Siemens SINAMICS
    • Emerson DeltaV
    • Allen-Bradley ControlLogix
    • Schneider Modicon
  • About Us
  • News
  • Request a Fast Quote
  • Large inventory and sourcing network. Stock items can ship in 1-2 business days. | TEL: +0086 19859288691 or via E-MAIL: support@konmask.com
  • +86 19859288691
    support@konmask.com