GE AINP-01 CODE 64530275E Input Bridge Control Board | Replacement, Equivalent & Selection Guide
The GE AINP-01 (Part No. 64530275E) is a dedicated Input Bridge Control Board manufactured by General Electric, designed for use in industrial drive and power conversion systems. This page provides full technical specifications, compatible replacement models, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
- Manufacturer: General Electric (GE)
- Part Number: AINP-01
- Code / Revision: 64530275E
- Description: Input Bridge Control Board
- Function: Controls and monitors the input rectifier bridge in AC drive systems; manages gate firing signals, fault detection, and bridge protection
- Form Factor: PCB module (plug-in card)
- Weight: 980 g (approx.)
- Condition Available: New, Refurbished, Tested & Repaired
- Warranty: 12 months (Konmask standard)
Note: Full electrical ratings (voltage, current, communication interface) vary by host drive platform. Contact us with your drive model for confirmation.
Compatible Replacement & Equivalent Models
The following models may serve as functional replacements or equivalents for the GE AINP-01 64530275E, subject to hardware revision and drive compatibility verification:
- GE AINP-01 (earlier/later code revisions, e.g., 64530275A / 64530275D)
- GE Drive Series input bridge boards with matching connector footprint
- ABB RINT-5611C / RINT-5521C (input bridge interface boards for ACS series — cross-platform reference)
- Siemens equivalent input rectifier control cards for SINAMICS/MICROMASTER series (consult engineering for pin mapping)
⚠ Important: Always verify part revision, firmware compatibility, and drive model before substituting. Konmask engineers can assist with cross-reference validation — contact us before ordering a replacement.
Why Choose the Original Model
- OEM Precision: Designed and tested specifically for GE drive platforms — no adaptation or re-parameterization required
- Proven Reliability: Field-proven in heavy industrial environments with documented MTBF performance
- Seamless Integration: Direct plug-in replacement; preserves existing wiring, firmware, and drive configuration
- Reduced Commissioning Risk: Eliminates compatibility unknowns associated with third-party alternatives
- Spare Parts Continuity: Stocking the original part ensures long-term serviceability of your GE drive fleet
Typical Applications
- AC variable frequency drives (VFDs) — input rectifier bridge control
- Industrial motor control centers (MCCs)
- Steel mills, paper mills, and heavy process industries
- Oil & gas compressor and pump drive systems
- Water treatment and HVAC large-motor applications
- Marine and offshore power conversion systems
System Compatibility
The GE AINP-01 64530275E is compatible with select GE industrial drive platforms. Confirmed compatibility should be verified against your drive’s documentation or serial number. Konmask can cross-reference your drive model number to confirm fit before shipment.
- GE Drive Series (consult nameplate for exact model)
- Systems using GE input bridge PCB form factor with 64530275x code series
If you are unsure whether this board fits your system, provide your drive model and serial number when contacting us.
Selection Guide
Use the following criteria to determine the correct input bridge control board for your application:
- Step 1 — Identify host drive model: Locate the drive nameplate; note manufacturer, model, and serial number.
- Step 2 — Confirm part number: Match the board part number (AINP-01) and code revision (64530275E) against the drive’s spare parts list or service manual.
- Step 3 — Check revision compatibility: Verify that the code revision (64530275E) is accepted by your drive firmware version.
- Step 4 — Evaluate replacement options: If the original is unavailable, consult Konmask for validated cross-reference alternatives.
- Step 5 — Confirm lead time & condition: Specify whether new, refurbished, or tested-used stock is acceptable for your maintenance strategy.
Quality Assurance & Sourcing
- All boards are inspected and functionally tested prior to shipment
- Sourced from authorized distributors, OEM surplus, and certified refurbishers
- Anti-static packaging with full traceability documentation
- Certificate of conformance available on request
- 12-month warranty against manufacturing defects and functional failure
- Konmask maintains stock of critical GE drive spare parts for rapid dispatch
How to Order
- Add to cart directly, or contact us for bulk / project pricing
- Provide your drive model and serial number for compatibility confirmation
- Specify required condition: New / Refurbished / Tested-Used
- Request a proforma invoice for procurement / finance approval if needed
- Payment via T/T, PayPal, or trade credit (approved accounts)
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Can I use a different code revision (e.g., 64530275D) instead of 64530275E?
A: Possibly. Minor revision changes are often backward-compatible, but this must be confirmed against your drive’s service bulletin. Contact us for guidance.
Q: Is the AINP-01 repairable if it has failed?
A: Yes. Konmask offers board-level repair services for GE drive PCBs. Send us the failed board for evaluation and quotation.
Q: Do you provide a test report with the board?
A: Yes. A functional test report is available upon request for refurbished and tested-used units.
Q: What is the lead time for a new unit?
A: Stock availability varies. Contact us for real-time inventory status and lead time confirmation.
Q: Can Konmask source other GE drive spare parts?
A: Yes. We specialize in GE, ABB, Siemens, Rockwell, and other industrial automation components. Submit your full BOM for a consolidated quote.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


