Genuine GE IC200EBI001 VersaMax - Industrial Automation Part

GE IC200EBI001 Slave Module | Replacement, Equivalent & Selection Guide

Category: GE Fanuc

Description

GE IC200EBI001 Slave Module | Replacement, Equivalent & Selection Guide

The GE IC200EBI001 is a VersaMax EtherNet/IP Bus Interface (EBI) Slave Module designed for distributed I/O expansion in GE Fanuc VersaMax automation systems. This page provides full technical specifications, compatible replacement models, and a structured selection guide to help engineers and procurement teams source the right module — whether original or equivalent.

Technical Specifications

Part Number: IC200EBI001
Manufacturer: GE Fanuc / GE Automation & Controls
Series: VersaMax
Function: EtherNet/IP Bus Interface Slave Module
Communication Protocol: EtherNet/IP (Industrial Ethernet)
Network Role: Adapter (Slave) — connects VersaMax I/O to an EtherNet/IP scanner/master
Supported I/O: Up to 32 I/O modules per node
Power Supply: 24 VDC (from VersaMax power supply module)
Operating Temperature: 0°C to 60°C
Dimensions: Standard VersaMax module form factor
Weight: ~140 g
Mounting: DIN rail via VersaMax carrier
Certifications: CE, UL (refer to GE datasheet for current listing)

Compatible Replacement & Equivalent Models

When the IC200EBI001 is unavailable or discontinued, the following models may serve as functional replacements depending on your system configuration. Always verify firmware and carrier compatibility before substitution.

IC200EBI001B — Revised hardware revision of the same module; direct drop-in replacement in most applications
IC200EBI001C — Later revision with enhanced diagnostics; backward compatible with IC200EBI001 carriers
IC200BEM103 — Profibus DP Slave BIM; alternative bus interface if migrating to Profibus architecture
IC200BEM104 — DeviceNet Slave BIM; suitable for DeviceNet-based distributed I/O topologies
IC200BEM001 — Genius Bus Interface Module; for legacy Genius network integration
Emerson / CIMPLICITY-compatible EtherNet/IP adapters — Post-GE acquisition equivalents; confirm part number mapping with Emerson Automation Solutions

Note: Cross-referencing should be validated against your PLC scanner’s EDS file and VersaMax carrier model. Contact support@konmask.com for compatibility verification.

Why Choose the Original Model

Guaranteed compatibility with all GE VersaMax carriers (IC200CHS series) and power supplies
Native EDS file support for seamless integration with Rockwell, Omron, and GE EtherNet/IP scanners
Proven field reliability in continuous industrial environments with 24/7 uptime requirements
OEM firmware ensures full diagnostic and fault-reporting capability via GE Proficy Machine Edition
Warranty and traceability — sourced from authorized channels with full documentation

Typical Applications

Distributed I/O expansion for GE VersaMax PLC systems over EtherNet/IP
Remote I/O nodes in manufacturing assembly lines and process control panels
Machine automation with centralized PLC and distributed sensor/actuator I/O
Water treatment, oil & gas, and power generation SCADA edge nodes
Retrofit and modernization of legacy GE Series 90 systems to Ethernet-based I/O

System Compatibility

PLC / Scanner: Any EtherNet/IP Class 1 scanner — GE PACSystems RX3i, RX7i, Rockwell ControlLogix, CompactLogix, Omron NJ/NX series
Carriers: IC200CHS002, IC200CHS005, IC200CHS014, IC200CHS022 (and compatible variants)
Power Supplies: IC200PWR001, IC200PWR002, IC200PWR101, IC200PWR102
I/O Modules: All IC200 series discrete and analog I/O modules
Configuration Software: GE Proficy Machine Edition 8.x and above; Rockwell Studio 5000 (via EDS)
Network Topology: Star, linear, or ring (with managed switch supporting DLR)

Selection Guide

Use the following criteria to confirm the IC200EBI001 is the right module for your application:

Network protocol required: EtherNet/IP → IC200EBI001 ✓ | Profibus DP → IC200BEM103 | DeviceNet → IC200BEM104
I/O count per node: ≤32 modules → IC200EBI001 ✓ | Larger node requirements → consider PACSystems RX3i remote I/O
Environment: Standard industrial (0–60°C, non-condensing) → IC200EBI001 ✓ | Harsh/extended temp → verify extended-range variants
Existing carrier: IC200CHS series → IC200EBI001 ✓ | Non-VersaMax carrier → incompatible, contact us
Revision requirement: If your system requires a specific hardware revision (A/B/C), specify at time of order

Quality Assurance & Sourcing

All IC200EBI001 units supplied by Konmask.com are sourced from verified industrial distributors and authorized surplus channels
Each module undergoes visual inspection and functional verification prior to shipment
Original packaging, labels, and documentation preserved where available
Traceability records maintained for B2B procurement compliance
Refurbished units clearly labeled and priced separately from new/surplus stock

How to Order

Online: Add to cart directly from this page — specify quantity and any revision preference in order notes
Email RFQ: support@konmask.com — include part number, quantity, required delivery date, and destination country
Phone/WhatsApp: +0086 19859288691 — available for urgent procurement and technical pre-sales consultation
Lead Time: In-stock orders ship within 1–3 business days; sourced orders 5–15 business days
Payment: T/T (wire transfer), PayPal, and major credit cards accepted
Export: We ship worldwide; export documentation (CO, packing list, commercial invoice) provided on request

Replacement & Compatibility FAQ

Q: Can I use IC200EBI001 with a Rockwell ControlLogix scanner?
A: Yes. The IC200EBI001 is an EtherNet/IP adapter and is compatible with any Class 1 EtherNet/IP scanner, including ControlLogix and CompactLogix. Import the GE-provided EDS file into Studio 5000 to configure the connection.

Q: Is IC200EBI001B a direct replacement for IC200EBI001?
A: In most cases, yes. The B revision is a hardware update with the same functional specification. Verify with your system integrator if your application uses revision-specific firmware features.

Q: What is the difference between IC200EBI001 and IC200BEM103?
A: The IC200EBI001 uses EtherNet/IP; the IC200BEM103 uses Profibus DP. They are not interchangeable — selection depends on your network protocol.

Q: Can Konmask.com source discontinued or hard-to-find revisions?
A: Yes. Submit an RFQ to support@konmask.com with your target revision and quantity. We maintain relationships with global surplus and authorized distributors.

Q: Do you provide a warranty?
A: Yes. New/surplus units carry a 12-month warranty against manufacturing defects. Refurbished units carry a 6-month warranty. Terms available on request.