Discrete Source I/O Solution — GE IC660BBD022 | Genius Block Series
Where This Product Is Used
The GE IC660BBD022 is a 16-circuit sourcing discrete I/O block designed for the GE Genius I/O distributed I/O system. It is widely deployed in environments where reliable, high-density discrete signal acquisition and control are critical:
- Automotive Assembly Lines — End-of-line testing stations, conveyor interlocks, and robotic cell safety monitoring where sourcing outputs drive 24 VDC actuators and solenoids.
- Packaging & Material Handling — Palletizers, case erectors, and sortation systems requiring fast, deterministic I/O response for proximity sensors and pneumatic valves.
- Food & Beverage Processing — Washdown-tolerant panel installations controlling filling lines, capping machines, and conveyor drives via GE Series 90 or Series Six PLCs.
- Chemical & Petrochemical Plants — Remote I/O drops in hazardous-area marshalling cabinets, reducing home-run wiring costs across large process units.
- Water & Wastewater Treatment — Pump station control panels and SCADA-connected RTU cabinets where distributed I/O minimises cable runs between field devices and the control room.
- Power Generation & Utilities — Auxiliary control panels for turbine BOP systems and switchgear monitoring using the Genius Bus serial network.
Technical Specifications
| Part Number | IC660BBD022 |
| Manufacturer | GE (General Electric) / GE Automation & Controls |
| Series | Genius I/O Block |
| Module Type | Discrete Source (PNP) I/O Block |
| Circuit Count | 16 Circuits (configurable as inputs or outputs) |
| Output Type | Source (PNP), solid-state |
| Rated Voltage | 24 VDC nominal |
| Output Current | 0.5 A per circuit (8 A max block) |
| Communication Bus | Genius Bus (serial, 153.6 kbps) |
| Bus Interface | Dual-port daisy-chain, 2 × Genius Bus connectors |
| Isolation | Optical isolation between field circuits and bus |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | -40 °C to +85 °C |
| Relative Humidity | 5% to 95% non-condensing |
| Enclosure Rating | IP20 (panel-mount) |
| Mounting | DIN rail or panel mount |
| Weight | Approx. 1.4 kg |
| Dimensions (H × W × D) | Refer to GE GFK-0898 installation manual |
| Power Consumption | Supplied via Genius Bus power; field power separate 24 VDC |
| Certifications | UL Listed, CE Marked |
Why Engineers Specify This Model
- High Circuit Density — 16 I/O points in a single compact block reduce panel footprint and wiring labour compared to rack-mounted discrete modules.
- Source (PNP) Output Architecture — Directly compatible with the majority of modern 24 VDC sensors and actuators used in European and Asian machine designs, eliminating the need for interposing relays.
- Genius Bus Resilience — The dual-port bus connection supports ring or daisy-chain topologies; a single cable fault does not take down the entire I/O network.
- Hot-Swap Capability — Blocks can be replaced under power in many configurations, minimising unplanned downtime during maintenance windows.
- Proven Longevity — The Genius I/O platform has a multi-decade installed base; spare parts availability and engineering familiarity remain high in brownfield facilities.
- Flexible Circuit Configuration — Individual circuits can be configured as inputs or outputs via software, reducing the number of distinct spare part SKUs a plant must stock.
Complete System Bill of Materials
A typical Genius I/O node using the IC660BBD022 requires the following components:
- IC660BBD022 — This block (16-circuit source I/O)
- IC660CBB900 / IC660CBB902 — Genius Bus Controller (GBC) for Series 90-70 or 90-30 PLC
- IC660BBA020 / IC660BBA024 — Genius Bus power supply block (if bus-powered nodes required)
- IC693PWR321 / IC693PWR330 — PLC rack power supply (Series 90-30)
- Genius Bus Cable — Belden 9182 or equivalent shielded twisted-pair, 78 Ω characteristic impedance
- IC660BBA100 — Bus terminator plug (required at each end of daisy-chain segment)
- 24 VDC Field Power Supply — Sized to total output load (e.g., Phoenix Contact QUINT series)
- DIN Rail & Terminal Blocks — For field wiring termination
Compliance & Industry Standards
- UL 508 — Industrial Control Equipment (UL Listed)
- CE Marking — EMC Directive 2014/30/EU; Low Voltage Directive 2014/35/EU
- IEC 61131-2 — Programmable Controllers: Equipment Requirements and Tests
- RoHS — Compliance status subject to manufacturing date; consult datasheet revision
- ATEX / IECEx — Not rated for Zone 1/2 hazardous areas in standard configuration; use appropriate barriers for intrinsically safe applications
Quality Assurance & Sourcing
Konmask.com sources the IC660BBD022 through established industrial automation distribution channels. Every unit offered is:
- Inspected for physical integrity, label authenticity, and connector condition prior to listing
- Stored in ESD-safe, climate-controlled warehousing to preserve electronics integrity
- Shipped with appropriate anti-static packaging and shock-absorbing materials
- Traceable to supplier documentation; certificates of conformance available on request
- Covered by Konmask’s standard return and exchange policy for DOA units
We supply both new surplus and refurbished/tested units. Condition is clearly stated on each listing. Refurbished units undergo functional bench testing against GE factory test parameters before dispatch.
How to Source This Part
- Confirm your bus topology — Verify whether your Genius Bus segment uses daisy-chain or ring configuration, and confirm the Bus Controller firmware revision supports IC660BBD022.
- Check quantity and lead time — Contact us at support@konmask.com or +0086 19859288691 for real-time stock levels and bulk pricing.
- Specify condition requirement — Indicate whether new surplus or refurbished/tested is acceptable for your application and budget.
- Place order — Add to cart directly, or request a formal quotation for PO-based procurement. We support T/T wire transfer, PayPal, and major credit cards.
- Receive and verify — Upon receipt, cross-check the part number label (IC660BBD022) and inspect connectors before installation. Refer to GE GFK-0898 for installation guidance.
Application-Specific FAQ
Q: Can the IC660BBD022 replace an IC660BBD020 (sink I/O block) in my panel?
A: Not directly. The BBD020 is a sinking (NPN) block; the BBD022 is sourcing (PNP). Replacing one with the other requires rewiring field devices and verifying sensor compatibility. Consult your electrical engineer before substitution.
Q: What is the maximum number of IC660BBD022 blocks per Genius Bus segment?
A: The Genius Bus supports up to 32 devices per segment (including the Bus Controller). Actual limits depend on bus loading, cable length (max 750 m per segment), and power budget.
Q: Is this block compatible with GE PACSystems RX3i controllers?
A: Yes, via a Genius Bus Controller (e.g., IC695GCG001) installed in the RX3i backplane. The IC660BBD022 communicates over the Genius Bus regardless of the host PLC generation.
Q: Can I mix input and output circuits on the same block?
A: Yes. Individual circuits are software-configurable as inputs or outputs using the Genius Bus Controller configuration tool (e.g., Proficy Machine Edition / Logicmaster 90).
Q: What happens if the Genius Bus cable is cut?
A: In a daisy-chain topology, blocks downstream of the break lose communication. In a ring topology, the Bus Controller detects the fault and reconfigures the network to maintain communication with all remaining blocks.
Q: Do you provide a warranty?
A: Yes. New surplus units carry a 12-month warranty against manufacturing defects. Refurbished/tested units carry a 90-day functional warranty. Contact support for claims.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


