High-Speed Computation & Parallel Processing Solution — GE IC697PCM711 | Series 90-70
Where This Product Is Used
The GE IC697PCM711 Programmable Coprocessor Module is deployed in demanding industrial environments where the main CPU requires offloaded computation or parallel task execution. Typical application scenarios include:
- Automotive Manufacturing: Real-time quality inspection algorithms, vision-system data processing, and high-speed PID loop control on assembly lines.
- Power Generation & Utilities: Turbine governor control, load-shedding logic, and SCADA data pre-processing in power plants running GE Series 90-70 racks.
- Oil & Gas Processing: Compressor surge control, pipeline flow computation, and safety instrumented system (SIS) co-processing in hazardous-area control panels.
- Chemical & Pharmaceutical Plants: Batch recipe execution, multi-loop regulatory control, and FDA 21 CFR Part 11-compliant data logging support.
- Pulp & Paper / Steel Mills: High-speed tension and speed regulation, coordinated drive control, and process optimization requiring sub-millisecond scan offloading.
- Water & Wastewater Treatment: Multi-pump sequencing, SCADA integration, and real-time flow/pressure computation in large municipal systems.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | GE (General Electric / GE Vernova) |
| Part Number | IC697PCM711 |
| Product Family | Series 90-70 PLC |
| Module Type | Programmable Coprocessor Module (PCM) |
| Processor | Intel 80C186 (16-bit, high-speed) |
| User Memory | 512 KB RAM (battery-backed) |
| Program Storage | Flash EPROM |
| Communication Interface | Dual-port RAM shared with Series 90-70 backplane |
| Programming Language | C (via GE PCM Development Kit) |
| Backplane Compatibility | IC697CHS750, IC697CHS782, IC697CHS790 and compatible Series 90-70 racks |
| Power Consumption | Supplied via backplane (5 VDC) |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% non-condensing |
| Weight | 700 g (approx.) |
| Form Factor | Single-slot Series 90-70 module |
Why Engineers Specify This Model
- CPU Offloading: Executes custom C-language algorithms independently of the main CPU scan cycle, eliminating scan-time bottlenecks in computation-intensive applications.
- Deterministic Parallel Processing: Shared dual-port RAM architecture ensures low-latency, deterministic data exchange between the PCM and the Series 90-70 CPU — critical for real-time control loops.
- Flexible Custom Programming: Engineers write application-specific code in C, enabling proprietary algorithms, custom communication protocols, and specialized math functions not available in standard ladder logic.
- Proven Platform Longevity: The Series 90-70 platform has decades of installed base in heavy industry; the IC697PCM711 is a trusted component for both new builds and long-term maintenance of existing systems.
- Battery-Backed RAM: Retains user program and data through power cycles without requiring re-download, reducing restart time in critical processes.
- Drop-In Rack Compatibility: Installs in any standard Series 90-70 rack slot — no special wiring or rack modification required.
Complete System Bill of Materials
A typical Series 90-70 system incorporating the IC697PCM711 includes the following components:
| Part Number | Description | Role |
|---|---|---|
| IC697PCM711 | Programmable Coprocessor Module | Custom computation / parallel processing |
| IC697CPU772 / IC697CPU781 | Series 90-70 CPU Module | Main PLC processor |
| IC697CHS750 / IC697CHS790 | Series 90-70 Rack / Chassis | Backplane and module housing |
| IC697PWR710 / IC697PWR711 | Power Supply Module | Rack power (120/240 VAC input) |
| IC697MDL340 / IC697MDL341 | Discrete Output Module | Digital I/O control |
| IC697ALG320 / IC697ALG321 | Analog Input Module | Process variable acquisition |
| IC697CMM742 | Ethernet Interface Module | SCADA / HMI network connectivity |
| IC697ACC701 | Lithium Battery (backup) | RAM retention during power loss |
Contact us to source any of the above components as a complete system package.
Compliance & Industry Standards
- CE Marking: Compliant with EU Low Voltage and EMC Directives (original GE design certification).
- UL Listed: Recognized under UL 508 (Industrial Control Equipment).
- RoHS: Original GE production units; RoHS status per specific manufacturing date code — confirm with our team if required.
- IEC 61131-2: Hardware design aligned with programmable controller hardware standard requirements.
- ATEX / IECEx: Not intrinsically rated; install in purged/pressurized enclosures for Zone 2 hazardous-area applications.
- ISO 9001: Sourced through suppliers operating under ISO 9001-certified quality management systems.
Quality Assurance & Sourcing
At Konmask.com, every IC697PCM711 unit undergoes a structured inspection and verification process before shipment:
- Visual Inspection: Board-level examination for physical damage, corrosion, burnt components, and counterfeit indicators.
- Firmware & Label Verification: Part number, revision level, and date code cross-checked against GE documentation.
- Functional Bench Test: Where test fixtures are available, modules are powered and communication with backplane is verified.
- ESD-Safe Packaging: All units shipped in anti-static bags with foam cushioning inside double-wall cartons.
- Traceability: Each unit is logged with source, inspection date, and inspector ID for full supply-chain traceability.
- Warranty: 12-month warranty against defects in materials and workmanship from date of shipment.
How to Source This Part
- Confirm Availability: Contact us via email or phone to verify current stock and lead time for IC697PCM711.
- Request a Quote: Provide your required quantity, delivery timeline, and any certification requirements. We respond within 1 business day.
- Place Your Order: Orders accepted via this product page, purchase order (PO), or direct bank transfer for B2B customers.
- Shipping: Domestic (China) orders ship within 1–3 business days. International orders ship via DHL / FedEx with full tracking. Export documentation (commercial invoice, packing list, COO) provided.
- After-Sales Support: Our technical team is available to assist with integration questions, system compatibility checks, and warranty claims.
Application-Specific FAQ
Q: Can the IC697PCM711 run independently without a Series 90-70 CPU in the same rack?
A: No. The PCM operates as a coprocessor and requires a Series 90-70 CPU module in the same rack for backplane communication and system initialization.
Q: What programming environment is required to develop code for the IC697PCM711?
A: GE provides the PCM Development Kit (C-language toolchain). Code is compiled on a PC and downloaded to the module via the backplane or a serial interface.
Q: Is this module compatible with the Series 90-30 or PACSystems RX7i rack?
A: No. The IC697PCM711 is exclusively compatible with Series 90-70 racks. It is not interchangeable with Series 90-30 or RX7i hardware.
Q: How does the PCM exchange data with the main CPU?
A: Via dual-port RAM on the backplane. The PCM writes to and reads from shared memory registers that the CPU can access within its normal scan cycle — no additional wiring required.
Q: Do you supply the PCM Development Kit or programming cables?
A: We can source GE programming accessories on request. Contact us with your specific requirements.
Q: What is the typical lead time for international orders?
A: In-stock units ship within 1–3 business days. International transit via DHL/FedEx Express is typically 3–7 business days depending on destination.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691




