Turbine Control Relay Solution — GE IS200SRTDH2ACV | Mark VI Series
Where This Product Is Used
The GE IS200SRTDH2ACV Simplex Terminal Relay Board is a critical I/O interface component deployed in GE Mark VI turbine control systems across a wide range of industrial power generation and rotating machinery applications. Engineers specify this board in:
- Gas turbine power plants — relay output interfacing for trip, alarm, and permissive logic in Frame 5, Frame 6, Frame 7, and Frame 9 gas turbines
- Steam turbine control panels — hardwired relay termination for EHC and protective relay circuits
- Combined-cycle power stations — HRSG and BOP control integration where Mark VI acts as the primary turbine controller
- Compressor stations — pipeline and process compressor control systems using GE Mark VI as the safety and sequencing platform
- Industrial cogeneration facilities — on-site power generation with relay-based interlock wiring to plant DCS or SCADA
- OEM turbine packages — factory-built skids where IS200SRTDH2ACV provides the relay termination layer between the Mark VI controller and field devices
In Simplex (single-channel) configurations, this board handles relay coil drive signals from the Mark VI VCMI or VTUR cards, converting digital outputs into dry-contact relay closures for field wiring to solenoids, contactors, and annunciator panels.
Technical Specifications
| Part Number | IS200SRTDH2ACV |
| Manufacturer | General Electric (GE Energy / GE Vernova) |
| Series | Mark VI Turbine Control System |
| Board Type | Simplex Terminal Relay Board |
| Configuration | Simplex (non-redundant) relay output termination |
| Relay Outputs | Multiple dry-contact relay channels for field device interfacing |
| Mounting | Mark VI I/O panel / terminal board rack |
| Compatibility | GE Mark VI, Mark VIe control systems; interfaces with VCMI, VTUR, and associated I/O cards |
| Revision | H2ACV (confirm revision compatibility with your Mark VI BOM) |
| Operating Environment | Industrial panel-mount; designed for continuous duty in power plant control rooms |
| Certifications | Manufactured under GE quality management system; CE / UL applicable per system-level certification |
Why Engineers Specify This Model
- Simplex architecture fit — purpose-built for single-channel Mark VI configurations where TMR redundancy is not required, reducing cost without sacrificing control integrity
- Direct OEM form-factor — drop-in replacement for existing IS200SRTDH2ACV boards; no panel modification or re-wiring required
- Relay isolation — provides galvanic isolation between the Mark VI digital output logic and field-side high-voltage or inductive loads
- Proven field reliability — widely deployed across GE Frame turbine fleets globally; extensive installed base with documented MTBF in power generation environments
- Reduced downtime risk — stocking a spare IS200SRTDH2ACV eliminates extended outages caused by relay board failures during planned or forced outages
- Revision-specific compatibility — H2ACV revision ensures firmware and hardware alignment with your existing Mark VI system BOM
Complete System Bill of Materials
The IS200SRTDH2ACV is typically specified alongside the following Mark VI components. Contact Konmask for availability on any of these parts:
- IS200VCMIH2A — Voter Communication Module (VCMI)
- IS200VTURH1B / IS200VTURH2A — Turbine Control I/O Card (VTUR)
- IS200TREGH1B — Terminal Relay Board (TMR variant, for redundant systems)
- IS200EPCTG1A — Ethernet Protection Card
- IS200DSPXH1A — Digital Signal Processor Card
- IS200BICLH1A — Binary Input Card
- IS200AEPCH1B — Analog I/O Card
- DS200TCQAG1BHF — Mark V/VI Transition I/O Card
- Mark VI I/O Panel Backplane and Rack Assembly
Compliance & Industry Standards
- NERC CIP — suitable for use in BES Cyber Systems when integrated within a compliant Mark VI control architecture
- IEC 61511 / IEC 61508 — Mark VI platform supports SIL-rated safety instrumented functions; consult GE SIL documentation for IS200SRTDH2ACV-specific SIL claim
- IEEE 1686 — intelligent electronic device (IED) cybersecurity standard applicable to Mark VI system-level deployment
- ANSI/ISA-18.2 — alarm management compliance for relay-driven annunciator outputs
- RoHS / WEEE — GE manufacturing compliance; confirm revision-specific RoHS status with Konmask sourcing team
Quality Assurance & Sourcing
Konmask sources IS200SRTDH2ACV boards through a controlled supply chain with the following quality commitments:
- Visual and functional inspection — each board is inspected for physical damage, component integrity, and connector condition prior to shipment
- Traceability documentation — serial number, revision, and sourcing records provided on request
- Authentic GE hardware only — Konmask does not supply counterfeit, re-marked, or unauthorized reproduction boards
- Packaging — ESD-safe anti-static packaging with foam cushioning; suitable for international air freight
- Warranty — 12-month warranty against defects in materials and workmanship; RMA process available
- Lead time — in-stock units ship within 1–3 business days; out-of-stock lead times quoted on inquiry
How to Source This Part
To place an order or request a quote for the GE IS200SRTDH2ACV:
- Email: support@konmask.com — include your PO number, required quantity, and delivery deadline
- Phone / WhatsApp: +0086 19859288691 — available for urgent inquiries and technical pre-sales questions
- Online: Add to cart directly on Konmask.com — secure checkout with bank transfer, PayPal, and T/T options
- Bulk / project orders: Request a formal quotation with lead time, inspection report, and export documentation (commercial invoice, packing list, COO)
Application-Specific FAQ
Q: Can IS200SRTDH2ACV be used in a TMR (Triple Modular Redundant) Mark VI system?
A: No. The SRTD designation indicates Simplex Terminal Relay Board. TMR systems use IS200TREGH1B or equivalent TMR relay termination boards. Using a Simplex board in a TMR rack will result in incorrect relay voting behavior.
Q: What is the difference between IS200SRTDH2ACV and IS200SRTDH1A?
A: The H2ACV revision reflects a later hardware revision with potential component or layout changes. Always match the revision to your existing Mark VI system BOM to ensure compatibility. Contact Konmask if you are unsure which revision your system requires.
Q: Do I need to re-configure the Mark VI software after replacing this board?
A: In most cases, a like-for-like board swap does not require software reconfiguration. However, GE recommends verifying relay output assignments and performing a functional test of all relay channels after replacement. Consult your Mark VI Application Manual (GEH-6421) for the replacement procedure.
Q: Can Konmask provide an inspection report or test certificate?
A: Yes. Inspection reports and sourcing traceability documents are available on request. Contact support@konmask.com with your order reference.
Q: What is the lead time for urgent orders?
A: In-stock units ship within 1–3 business days from Xiamen, China. Express DHL/FedEx options are available for next-flight-out requirements. Contact us for emergency sourcing support.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


