Turbine Control Communication Solution – GE IS210AEBIH1BED | Mark VI Series
Where This Product Is Used
The GE IS210AEBIH1BED AE Bridge Interface Card is a critical communication module deployed in GE Mark VI Turbine Control Systems across power generation and heavy industrial environments. Engineers specify this card in the following application scenarios:
- Gas Turbine Control Panels – Serves as the AE (Application Engine) bridge interface, enabling high-speed data exchange between the Mark VI controller and plant-level SCADA/DCS networks.
- Steam Turbine Governor Systems – Provides reliable I/O bridge communication for turbine speed, load, and protection logic in combined-cycle power plants.
- Combined Heat & Power (CHP) Plants – Integrates turbine control data into plant-wide energy management systems via the AE bridge protocol.
- Compressor Station Automation – Used in pipeline compressor stations where GE Mark VI controls reciprocating or centrifugal compressors requiring bridge-level communication.
- Offshore Oil & Gas Platforms – Installed in hazardous-area control cabinets where robust, vibration-tolerant interface cards are mandatory.
- Refinery Turbine Drives – Supports process turbine drives in petrochemical facilities requiring continuous uptime and deterministic communication.
Technical Specifications
- Part Number: IS210AEBIH1BED
- Series: GE Mark VI Turbine Control System
- Card Type: AE Bridge Interface Card
- Form Factor: VME-compatible plug-in module
- Communication Protocol: AE Bridge (Application Engine Bridge)
- Operating Temperature: 0°C to 60°C (standard industrial range)
- Weight: 320 g (approx.)
- Manufacturer: GE (General Electric) / GE Vernova
- Condition Available: New surplus / Tested refurbished
Why Engineers Specify This Model
- Drop-in Compatibility: Designed exclusively for GE Mark VI racks — no firmware re-flashing or hardware modification required for like-for-like replacement.
- Deterministic Latency: The AE bridge architecture delivers low-latency, cycle-synchronous data transfer essential for turbine protection and governor response.
- Proven Field Reliability: Widely deployed in GE Frame 6B, 7E, 7F, and 9E gas turbine fleets globally, with documented MTBF exceeding 100,000 hours in controlled environments.
- Reduced Downtime Risk: Stocking a spare IS210AEBIH1BED eliminates multi-week OEM lead times during unplanned outages — a critical consideration for peaking power plants.
- Backward Compatibility: Compatible with multiple Mark VI firmware revisions, reducing qualification risk during emergency replacements.
Complete System Bill of Materials
The IS210AEBIH1BED is typically installed alongside the following Mark VI components. Konmask.com stocks most of these parts:
- IS215UCVEH2A – Mark VI UCVE Controller Card
- IS200TREGH1B – Mark VI TREG Terminal Board
- IS210BPPCH1BED – Mark VI BPPC Power Supply Card
- IS200VTURH1BDD – Mark VI VTUR I/O Terminal Board
- IS215VCMIH2A – Mark VI VCMI Communication Interface
- DS200TCQAG1BHF – Mark VI TCQA Analog I/O Board
Contact us to confirm cross-compatibility and current stock levels for your specific Mark VI cabinet revision.
Compliance & Industry Standards
- CE Marking: Compliant with applicable EU directives for industrial control equipment
- RoHS: Manufactured under GE’s RoHS compliance program
- IEC 61511 / IEC 61508: Mark VI platform is used in SIL-rated safety instrumented systems; consult your SIS engineer for SIL loop validation
- IEEE 1613: Communication networking devices for substation environments (applicable to power plant deployments)
- NERC CIP: Compatible with Mark VI deployments subject to NERC CIP cybersecurity compliance programs
Quality Assurance & Sourcing
Every IS210AEBIH1BED unit shipped by Konmask.com undergoes the following quality process:
- ✔ Visual inspection for physical damage, corrosion, and component integrity
- ✔ Functional power-on test where applicable
- ✔ Firmware revision verification and documentation
- ✔ Anti-static packaging with humidity indicator card
- ✔ Traceable sourcing documentation available on request
We source from decommissioned power plant inventories, authorized distributors, and verified surplus channels — never from unverified grey-market brokers.
How to Source This Part
- Add to Cart – Proceed directly if your part number and revision match.
- Request a Quote – For bulk orders (3+ units), OEM warranty requirements, or expedited shipping, contact our team.
- Provide Your Cabinet Revision – Share your Mark VI cabinet drawing number or existing card revision (e.g., H1BED, H1BEF) to confirm compatibility before ordering.
- Lead Time – In-stock units ship within 1–3 business days. Out-of-stock units: 2–6 weeks sourcing lead time.
📧 support@konmask.com | 📞 +0086 19859288691
Application-Specific FAQ
Q: Is IS210AEBIH1BED compatible with Mark VIe systems?
A: No. The IS210AEBIH1BED is designed for the Mark VI platform. Mark VIe uses a different I/O and communication architecture. Contact us to identify the correct Mark VIe equivalent.
Q: Can this card be repaired if it fails?
A: Board-level repair is possible for some failure modes. Konmask.com offers repair evaluation services — contact us with your failure symptoms for assessment.
Q: What is the difference between IS210AEBIH1BED and IS210AEBIH1BEF?
A: The suffix letters (BED vs BEF) denote hardware revision levels. In most cases they are functionally interchangeable, but always verify with your GE Mark VI system documentation or contact our engineers.
Q: Do you provide a warranty?
A: Yes. All tested refurbished units carry a 12-month functional warranty. New surplus units carry a 6-month warranty. Terms available on request.
Q: Can you ship internationally?
A: Yes. We ship worldwide with DHL, FedEx, and UPS Express. Export documentation and commercial invoices are provided for customs clearance.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
