GE IS215PMVPH1AA / IS200MVREH1ABB Protection I/O Module – Mark VIe Turbine Control System
When a protection I/O module fails in a gas or steam turbine control system, the consequences are immediate and severe: unplanned shutdowns, loss of overspeed and flame-out protection, and potential catastrophic equipment damage. In power generation and heavy industrial environments, every minute of unplanned downtime can cost tens of thousands of dollars — and more critically, it can compromise personnel safety. The GE IS215PMVPH1AA / IS200MVREH1ABB Protection I/O Module is the critical interface that keeps turbine protection logic active, reliable, and responsive.
The IS215PMVPH1AA paired with the IS200MVREH1ABB represents GE’s dedicated protection-grade I/O solution within the Mark VIe Turbine Control System — GE’s flagship distributed control architecture for gas turbines, steam turbines, and combined-cycle power plants. Widely deployed across power utilities, LNG facilities, and industrial cogeneration plants globally, this module set is recognized for its TMR (Triple Modular Redundancy) compatibility and deterministic response times that meet the stringent demands of API 670 and IEC 61511 safety standards.
Technical Specifications
- Part Numbers: IS215PMVPH1AA / IS200MVREH1ABB
- Manufacturer: GE (General Electric) / GE Vernova
- Series: Mark VIe Turbine Control System
- Module Type: Protection I/O Module
- Form Factor: VME-based plug-in module
- Communication: IONet Ethernet-based I/O network
- Redundancy Support: Simplex / TMR (Triple Modular Redundancy)
- Operating Temperature: 0°C to 60°C (32°F to 140°F)
- Power Supply: Supplied via Mark VIe I/O pack backplane
- Compliance: CE, UL, IEC 61131-2
- Weight: Approx. 500 g
Note: Specifications are based on GE published documentation. Always verify against your system’s engineering drawings before installation.
Key Features & Benefits
- Protection-Grade I/O: Dedicated to turbine protection functions including overspeed, vibration, and flame detection signal processing.
- TMR Architecture Ready: Supports triple-redundant voting logic for SIL 2/3 safety integrity levels.
- IONet Connectivity: High-speed deterministic Ethernet I/O network ensures sub-millisecond response times.
- Hot-Swap Capable: Designed for online replacement in Mark VIe cabinets without full system shutdown (configuration dependent).
- Proven Field Reliability: Deployed in thousands of turbine units across 6 continents in power generation, oil & gas, and petrochemical industries.
- GE ToolboxST Compatible: Fully configurable via GE’s ToolboxST engineering workstation software.
Industry & Equipment Applications
- Gas turbine protection systems (GE Frame 6, Frame 7, Frame 9 series)
- Steam turbine control and protection (combined-cycle power plants)
- LNG liquefaction and regasification compressor trains
- Offshore platform turbine-driven generators
- Industrial cogeneration and waste-heat recovery units
- Refinery and petrochemical rotating equipment protection
System Integration & Compatible Parts
The IS215PMVPH1AA / IS200MVREH1ABB integrates within the GE Mark VIe I/O pack ecosystem. Commonly paired or replaced alongside:
- IS215UCVEH2A / IS215UCVEH2B — Mark VIe UCVx Controller
- IS200TSVOH1B — Mark VIe Terminal Board
- IS200VTURH1BBA — Turbine Protection Terminal Board
- IS215ACLEH2A — Mark VIe AC/DC Power Supply Module
- IS200DSPXH1A — Digital Signal Processor Board
Always cross-reference your system’s Bill of Materials (BOM) and GE engineering drawings (GEH series) before ordering replacement modules.
Our Quality Assurance Process
- Visual Inspection: All modules inspected for physical damage, corrosion, and component integrity upon receipt.
- Functional Testing: Power-on and communication verification performed where applicable.
- Authenticity Verification: Part numbers, revision codes, and date codes verified against GE documentation.
- Anti-Static Packaging: Shipped in ESD-safe bags with foam cushioning and moisture barrier packaging.
- Traceability: Each unit tracked with inspection records available upon request.
How to Order
- Submit your inquiry via the Contact Us form or email support@konmask.com.
- Provide your full part number, required quantity, and any revision/suffix requirements.
- Our technical team will confirm availability, lead time, and issue a formal quotation within 24 hours.
- Upon PO confirmation, we arrange secure packaging and international shipping with full documentation (commercial invoice, packing list, COO).
Why Choose Konmask.com?
- Industrial Automation Specialists: Focused exclusively on PLC, DCS, and turbine control components from leading OEMs.
- Global B2B Supply: Serving power utilities, EPC contractors, and MRO teams across 50+ countries.
- Fast Response: Dedicated technical sales team responds to all inquiries within 1 business day.
- Secure Shipping: DHL, FedEx, and UPS express options with full export documentation support.
- Long-Term Partnership: We support your ongoing MRO and spare parts planning, not just one-time transactions.
Frequently Asked Questions
Q: What is the difference between IS215PMVPH1AA and IS200MVREH1ABB?
A: The IS215PMVPH1AA is the primary protection I/O processor module, while the IS200MVREH1ABB is the associated terminal/relay board that provides the physical I/O interface. They are typically installed and replaced as a matched set within the Mark VIe protection I/O pack.
Q: Is this module compatible with Mark VI (non-e) systems?
A: No. The IS215PMVPH1AA is designed specifically for the Mark VIe architecture with IONet communication. It is not backward compatible with the older Mark VI ARCNET-based system. Please verify your system generation before ordering.
Q: Do you supply new, refurbished, or surplus units?
A: We supply both new-surplus (unused, original packaging) and professionally refurbished units. Condition is clearly stated in the quotation. All units undergo our QA process regardless of condition.
Q: Can you provide a Certificate of Conformance (CoC)?
A: Yes. A CoC and inspection report are available upon request for all orders.
Q: What is the typical lead time?
A: In-stock units ship within 2–3 business days. For sourced units, lead time is typically 1–3 weeks depending on availability. Contact us for current stock status.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
{
“@context”: “https://schema.org/”,
“@type”: “Product”,
“name”: “GE IS215PMVPH1AA / IS200MVREH1ABB Protection I/O Module”,
“description”: “GE IS215PMVPH1AA and IS200MVREH1ABB Protection I/O Module for Mark VIe turbine control systems. Supports TMR redundancy, IONet communication, and SIL 2/3 safety integrity levels.”,
“sku”: “IS215PMVPH1AA/IS200MVREH1ABB”,
“brand”: {
“@type”: “Brand”,
“name”: “GE”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “GE (General Electric)”
},
“category”: “Protection I/O Module”,
“url”: “https://konmask.com/products/ge-is215pmvph1aa-is200mvreh1abb-protection-io-module-mark-vie”,
“offers”: {
“@type”: “Offer”,
“url”: “https://konmask.com/products/ge-is215pmvph1aa-is200mvreh1abb-protection-io-module-mark-vie”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
}
{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the difference between IS215PMVPH1AA and IS200MVREH1ABB?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The IS215PMVPH1AA is the primary protection I/O processor module, while the IS200MVREH1ABB is the associated terminal/relay board. They are typically installed and replaced as a matched set within the Mark VIe protection I/O pack.”
}
},
{
“@type”: “Question”,
“name”: “Is this module compatible with Mark VI (non-e) systems?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. The IS215PMVPH1AA is designed specifically for the Mark VIe architecture with IONet communication. It is not backward compatible with the older Mark VI ARCNET-based system.”
}
},
{
“@type”: “Question”,
“name”: “Do you supply new, refurbished, or surplus units?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “We supply both new-surplus (unused, original packaging) and professionally refurbished units. Condition is clearly stated in the quotation. All units undergo our QA process regardless of condition.”
}
},
{
“@type”: “Question”,
“name”: “Can you provide a Certificate of Conformance (CoC)?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. A CoC and inspection report are available upon request for all orders.”
}
},
{
“@type”: “Question”,
“name”: “What is the typical lead time?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “In-stock units ship within 2–3 business days. For sourced units, lead time is typically 1–3 weeks depending on availability.”
}
}
]
}
