GE IS215VPROH1BD Speedtronic Mark VI RTD Card | Replacement, Equivalent & Selection Guide
The GE IS215VPROH1BD is a Resistance Temperature Detector (RTD) input card designed for the GE Speedtronic Mark VI turbine control system. It provides high-accuracy temperature signal conditioning for gas and steam turbine protection and control applications. Konmask.com supplies genuine and compatible units with full traceability.
Technical Specifications
- Part Number: IS215VPROH1BD
- Manufacturer: GE (General Electric)
- Series: Speedtronic Mark VI
- Card Type: RTD (Resistance Temperature Detector) Input Card
- Input Channels: Multiple RTD input channels (PT100 / PT1000 compatible)
- Communication: Mark VI backplane I/O bus
- Form Factor: VME-style plug-in module
- Operating Temperature: 0°C to 60°C
- Weight: Approx. 360 g
- Compliance: CE, UL industrial standards
Compatible Replacement & Equivalent Models
When the IS215VPROH1BD is unavailable or end-of-life, the following models may serve as functional replacements depending on your system revision and firmware version. Always verify compatibility with your Mark VI system integrator before substitution.
- IS215VPROH1B — Earlier hardware revision; functionally equivalent in most Mark VI configurations
- IS215VPROH1A — First-generation variant; verify firmware compatibility
- IS215VPROH2BD — Enhanced revision with extended channel support (check slot compatibility)
- IS200VPROH1B — Mark VIe platform equivalent; requires system-level validation
- Third-party RTD modules — Contact Konmask.com for vetted cross-reference options
Why Choose the Original IS215VPROH1BD
- Factory-calibrated for GE Mark VI backplane signal integrity
- Guaranteed firmware and hardware revision compatibility with Mark VI UCSC/UCSC controllers
- Minimizes re-commissioning time versus third-party alternatives
- Full GE diagnostic and HMI integration without additional configuration
- Preferred by OEM service contracts and insurance-compliant maintenance programs
Typical Applications
- Gas turbine exhaust and inlet temperature monitoring
- Steam turbine bearing and casing temperature protection
- Compressor inter-stage temperature measurement
- Combined-cycle power plant DCS integration
- Industrial process temperature control loops
System Compatibility
- Primary Platform: GE Speedtronic Mark VI turbine control system
- Controller Compatibility: UCSC, UCSB, UCSA controller boards
- I/O Rack: Mark VI I/O pack and VME rack configurations
- HMI: GE Cimplicity / ToolboxST compatible
- Not compatible with: Mark V, Mark IV, or non-GE turbine control platforms without engineering review
Selection Guide
Use the following criteria to confirm the correct RTD card for your Mark VI system:
- Step 1 — Identify hardware revision: Check the label on your existing card (H1A / H1B / H1BD / H2BD)
- Step 2 — Confirm RTD sensor type: PT100 (3-wire) is standard; verify wiring diagram
- Step 3 — Check slot assignment: Confirm I/O slot address in ToolboxST configuration
- Step 4 — Firmware version: Ensure Mark VI controller firmware supports the card revision
- Step 5 — Contact Konmask: Provide your system serial number for final cross-reference validation
Quality Assurance & Sourcing
- All units inspected and tested prior to shipment
- Sourced from authorized distributors and certified refurbishers
- Full traceability documentation available on request
- Anti-static packaging with ESD protection
- 90-day warranty on all stocked units; extended warranty available
How to Order
- Online: Add to cart directly on this page
- Email: [email protected] with your PO or RFQ
- Phone/WhatsApp: +0086 19859288691
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
- Shipping: Worldwide DHL / FedEx / UPS with tracking
Replacement & Compatibility FAQ
Q: Can IS215VPROH1B replace IS215VPROH1BD?
A: In most Mark VI configurations, yes. The “D” suffix typically denotes a minor hardware revision. Confirm with your system documentation or contact us.
Q: Is IS215VPROH1BD compatible with Mark VIe?
A: Mark VIe uses a different I/O architecture (IS200 series). Direct substitution is not recommended without engineering review.
Q: Do you supply refurbished units?
A: Yes. All refurbished units are tested to OEM specifications and include a 90-day warranty.
Q: Can you help identify the correct replacement if my card is damaged?
A: Yes — send us the part number, hardware revision, and system serial number and we will provide a validated cross-reference.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
