GE IS220PDIOH1A Gas Turbine Control | Replacement, Equivalent & Selection Guide
The GE IS220PDIOH1A is a digital I/O module designed for GE’s Mark VIe turbine control platform. It provides high-density discrete process I/O for gas turbine, steam turbine, and balance-of-plant (BOP) control applications. This page serves as a comprehensive selection guide covering technical specifications, compatible replacements, equivalent alternatives, and sourcing information.
Technical Specifications
- Part Number: IS220PDIOH1A
- Manufacturer: GE (General Electric) — Energy Controls Division
- Platform: Mark VIe Turbine Control System
- Module Type: Discrete Process I/O (PDIO)
- I/O Configuration: 24 discrete inputs / 16 discrete outputs
- Input Voltage: 24 VDC nominal
- Output Type: Solid-state relay (SSR) outputs
- Communication: IONet (Ethernet-based deterministic I/O network)
- Redundancy Support: Simplex and TMR (Triple Modular Redundancy)
- Operating Temperature: 0°C to 60°C
- Dimensions: Standard Mark VIe I/O module form factor
- Weight: ~380 g
- Certifications: CE, UL listed (industrial control equipment)
Compatible Replacement & Equivalent Models
When the IS220PDIOH1A is unavailable or end-of-life, the following models may serve as direct or functional replacements depending on your system revision and I/O requirements:
- IS220PDIOH1B — Revised hardware revision of the same module; pin-compatible, firmware update may be required
- IS220PDIAH1A — Analog process I/O variant; use only if I/O type requirements allow substitution
- IS200DTURH1A — Earlier Mark VI turbine I/O board; compatible in legacy retrofit scenarios
- IS220PSCAH1A — Power supply and communication module; used in conjunction, not a direct I/O replacement
- Third-party equivalents: Certain Bently Nevada and Woodward controllers offer functional equivalence in BOP applications — consult your system integrator for cross-reference validation
Note: Always verify firmware compatibility and I/O mapping before substituting modules in a live turbine control system.
Why Choose the Original Model
- OEM Guaranteed Compatibility: Designed and validated by GE for Mark VIe — zero integration risk
- TMR Redundancy Support: Critical for safety-rated turbine applications requiring fault tolerance
- Long Field Track Record: Deployed globally in power generation, oil & gas, and petrochemical plants
- GE ToolboxST Support: Full configuration and diagnostics via GE’s native engineering workstation
- Spare Parts Ecosystem: Broad availability of mating terminal boards (e.g., IS200TBCIH1C) and cables
Typical Applications
- Gas turbine start/stop sequencing and flame detection I/O
- Steam turbine trip and protection logic
- Balance-of-plant (BOP) discrete control in combined-cycle power plants
- Compressor station control and ESD (Emergency Shutdown) systems
- Offshore platform turbine control upgrades
- Refinery and petrochemical rotating equipment control
System Compatibility
- Control Platform: GE Mark VIe (primary); limited compatibility with Mark VI via adapter
- Terminal Boards: IS200TBCIH1C, IS200TBCIH2C (verify revision match)
- Engineering Tool: GE ToolboxST (version 05.02 and above recommended)
- Network: IONet — 100 Mbps Ethernet, deterministic protocol
- Redundancy Modes: Simplex (S), Dual (D), Triple Modular Redundancy (T)
- Power Supply: Requires IS220PSCAH1A or equivalent Mark VIe power module
Selection Guide
Use the following criteria to confirm IS220PDIOH1A is the correct module for your application:
- Step 1 — Platform Check: Confirm your system is GE Mark VIe (not Mark VI or Mark VIeS)
- Step 2 — I/O Type: Verify you need discrete (digital) I/O — not analog (4–20 mA) or thermocouple inputs
- Step 3 — Channel Count: Confirm 24 DI / 16 DO channel count meets your loop requirements
- Step 4 — Redundancy Mode: Identify whether your rack is Simplex, Dual, or TMR — IS220PDIOH1A supports all three
- Step 5 — Revision: Check existing module label for hardware revision (H1A vs H1B) to ensure spare compatibility
- Step 6 — Terminal Board: Confirm mating terminal board part number and cable harness availability
If you are unsure, share your system configuration or existing module label with our team — we will confirm compatibility before shipment.
Quality Assurance & Sourcing
- Source: Surplus new, refurbished OEM, and factory-reconditioned units available
- Inspection: Each unit undergoes visual inspection, functional bench test, and ESD-safe packaging
- Warranty: 12-month replacement warranty on all stocked units
- Traceability: Serial number and revision documented at time of shipment
- Packaging: Anti-static bag, foam-lined carton, humidity indicator card included
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
How to Order
- Online: Add to cart directly on this page — select quantity and proceed to checkout
- Email RFQ: Send part number, quantity, and required delivery date to support@konmask.com
- Phone/WhatsApp: +0086 19859288691 — available Monday–Friday, 09:00–18:00 CST
- Bulk / OEM Orders: Contact us for volume pricing and blanket purchase agreements
- Export Orders: We support international shipping with commercial invoice, packing list, and COO documentation
Replacement & Compatibility FAQ
Q: Can IS220PDIOH1B replace IS220PDIOH1A directly?
A: In most cases yes — the H1B is a hardware revision of the same module. A firmware update via ToolboxST may be required. Confirm with your GE service engineer before hot-swapping in a live system.
Q: Is IS220PDIOH1A compatible with Mark VI (not Mark VIe)?
A: No — IS220PDIOH1A is designed for Mark VIe IONet architecture. Mark VI uses a different I/O bus (IONET vs. older serial I/O). An adapter or full controller upgrade is required.
Q: Can I use a third-party equivalent in a safety-rated (SIL) application?
A: Only if the third-party module carries the same SIL certification and has been validated by your functional safety engineer. We recommend OEM parts for SIL-rated loops.
Q: What is the typical lead time for a refurbished unit?
A: In-stock refurbished units ship within 1–3 business days. If sourcing is required, expect 5–15 business days. Contact us for real-time stock status.
Q: Do you provide a test report with the module?
A: Yes — a bench test report is available upon request for refurbished units. New surplus units include original GE factory documentation where available.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






