GE DS200SLCCG1AFG Communication Card | Replacement, Equivalent & Selection Guide
The GE DS200SLCCG1AFG is a Communication Card designed for use in General Electric’s Mark V and Mark VI turbine control systems. It serves as a critical interface module enabling serial and network communication between the control system and peripheral devices. Konmask.com stocks verified original and compatible units, ready for immediate dispatch to minimize your downtime.
Technical Specifications
| Part Number | DS200SLCCG1AFG |
| Manufacturer | General Electric (GE) |
| Series | DS200 / Mark V / Mark VI |
| Function | Communication Card (Serial / Network Interface) |
| Form Factor | PCB Module / Plug-in Card |
| Weight | Approx. 240 g |
| Operating Temperature | 0°C to 60°C (typical industrial range) |
| Compatibility | GE Mark V, Mark VI Turbine Control Panels |
| Condition Available | New, Refurbished, Tested |
Compatible Replacement & Equivalent Models
If the DS200SLCCG1AFG is unavailable or discontinued, the following models may serve as functional equivalents or drop-in replacements depending on your system revision. Always verify firmware and hardware revision compatibility before substitution.
- DS200SLCCG1AEG – Earlier revision; functionally equivalent in most Mark V applications
- DS200SLCCG1BFG – Later revision with minor firmware updates; backward compatible
- DS200SLCCG2AFG – Enhanced communication variant; confirm slot and backplane compatibility
- IS200SLCCG1A – Mark VI series equivalent; requires system-level verification
- DS200SDCCG3A – Alternative communication card for Mark VI; different pinout, consult GE documentation
Note: Contact Konmask technical support to confirm cross-compatibility for your specific panel revision before ordering a replacement.
Why Choose the Original Model
- Guaranteed Compatibility: Factory-matched to GE Mark V/VI control architecture — no firmware conflicts or signal mismatch
- Regulatory Compliance: Meets OEM specifications for power generation and industrial control environments
- Reduced Integration Risk: Eliminates the engineering effort required to validate a third-party substitute
- Long Service Life: Designed for continuous-duty industrial operation with proven field reliability
- Traceability: Original units sourced through verified supply chains with full documentation available on request
Typical Applications
- Gas turbine and steam turbine control systems (GE Frame 5, 6, 7, 9)
- Combined-cycle power plant automation
- Industrial compressor and pump control panels
- Offshore and onshore oil & gas processing facilities
- Petrochemical plant distributed control systems
- Utility-scale power generation facilities requiring Mark V/VI upgrades or maintenance
System Compatibility
- GE Mark V Turbine Control System – Primary platform; direct fit
- GE Mark VI Turbine Control System – Compatible with appropriate revision; verify slot assignment
- GE SPEEDTRONIC™ Control Panels – Applicable to panels using DS200-series communication architecture
- Third-Party SCADA / DCS Integration – Supports Modbus, RS-232/RS-485 serial protocols (confirm with system integrator)
Selection Guide
Use the following criteria to select the correct communication card for your application:
- Step 1 – Identify your control system: Confirm whether your panel is Mark V or Mark VI and note the panel serial number.
- Step 2 – Check the hardware revision: The suffix letters (e.g., G1AFG) indicate hardware and firmware revision. Match exactly when possible.
- Step 3 – Verify slot position: Communication cards are slot-specific in Mark V/VI racks. Confirm the card’s designated slot from your system drawing.
- Step 4 – Assess protocol requirements: Confirm whether your application requires RS-232, RS-485, Ethernet, or proprietary GE serial protocol.
- Step 5 – Contact Konmask: Provide your panel model, serial number, and current card part number. Our engineers will confirm the correct replacement.
Quality Assurance & Sourcing
- All units undergo functional testing prior to shipment
- Refurbished units are cleaned, inspected, and tested to OEM performance standards
- Certificates of conformance and test reports available upon request
- Supply chain traceability maintained — no counterfeit risk
- Packaging: ESD-safe anti-static bags with foam cushioning for safe transit
How to Order
- Add the DS200SLCCG1AFG to your cart and proceed to checkout, or
- Contact us directly for bulk orders, urgent requirements, or technical pre-sales consultation:
- Email: support@konmask.com
- Phone / WhatsApp: +0086 19859288691
- Website: https://Konmask.com
Lead time: In-stock units ship within 1–3 business days. Special-order or refurbished units: 5–10 business days.
Replacement & Compatibility FAQ
Q: Can DS200SLCCG1AEG replace DS200SLCCG1AFG?
A: In most Mark V applications, yes. The AEG suffix is an earlier hardware revision. Functional behavior is typically identical, but confirm with your system integrator for safety-critical applications.
Q: Is this card compatible with Mark VI systems?
A: Partial compatibility exists. Mark VI uses the IS200-series as primary, but some DS200-series cards are interoperable. Contact Konmask to verify for your specific panel.
Q: Do you offer tested/refurbished units?
A: Yes. All refurbished units are fully tested and include a 90-day warranty. New surplus units carry the original manufacturer warranty where applicable.
Q: Can I send my faulty card for repair?
A: Yes, board-level repair service is available. Contact support@konmask.com with your card details and fault description for a repair quote.
Q: What is the lead time for out-of-stock units?
A: Typically 5–15 business days depending on sourcing. We maintain a global supplier network for hard-to-find GE parts.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






