GE IS220PRTDH1A RTD Input Module | Replacement, Equivalent & Selection Guide
The GE IS220PRTDH1A is a Resistance Temperature Device (RTD) Input Module designed for the GE Mark VIe Distributed Control System (DCS). It provides high-accuracy temperature measurement for turbine control and industrial process automation. This page serves as a comprehensive selection, replacement, and compatibility reference for engineers and procurement teams sourcing IS220PRTDH1A or its functional equivalents.
Technical Specifications
- Part Number: IS220PRTDH1A
- Manufacturer: GE (General Electric) / Baker Hughes
- Series: Mark VIe (IS220 Series)
- Module Type: RTD (Resistance Temperature Device) Input Module
- Input Channels: 12 RTD input channels (differential)
- RTD Types Supported: PT100, PT200, PT500, PT1000, Ni120, Cu10
- Measurement Range: -200°C to +850°C (PT100)
- Accuracy: ±0.1°C typical
- Communication: IONet (GE proprietary Ethernet-based I/O network)
- Power Supply: 24 VDC (supplied via backplane)
- Form Factor: Single-width Mark VIe I/O module
- Weight: Approx. 380 g
- Operating Temperature: 0°C to 60°C
- Certifications: CE, UL (refer to GE datasheet for full listing)
- Country of Origin: USA
Compatible Replacement & Equivalent Models
The following modules are functionally compatible or serve as direct/near-direct replacements for the IS220PRTDH1A in Mark VIe systems. Always verify firmware and backplane compatibility before substitution.
- IS220PRTDH1B — Revised hardware revision of IS220PRTDH1A; pin-compatible, same IONet interface
- IS220PRTDH2A — Enhanced version with extended channel diagnostics; backward compatible
- IS215PRTDH1A — Mark VI series predecessor; requires adapter terminal board for Mark VIe backplane
- IS200PRTDH1A — Older Mark V/VI generation; not directly interchangeable without engineering review
- Third-party equivalents: Consult Konmask engineering team for validated third-party RTD input modules compatible with Mark VIe IONet architecture
Note: Replacement modules must match the terminal board (TRPD, TRPDH) and IONet slot assignment. Contact support@konmask.com for a compatibility check.
Why Choose the Original IS220PRTDH1A
- OEM Guaranteed Compatibility: Designed and validated by GE for Mark VIe — zero integration risk
- Proven Field Reliability: Widely deployed in gas turbine, steam turbine, and combined-cycle power plants globally
- Full Diagnostic Support: Native integration with Mark VIe Toolbox for channel-level fault diagnostics
- Long Service Life: Robust industrial-grade components rated for continuous 24/7 operation
- Firmware Traceability: GE-certified firmware version tracking for compliance and audit requirements
Typical Applications
- Gas turbine exhaust temperature monitoring (EGT)
- Steam turbine bearing and casing temperature measurement
- Combined-cycle power plant DCS temperature loops
- Compressor inlet/outlet temperature sensing
- Industrial boiler and heat exchanger process control
- Oil & gas upstream/downstream temperature instrumentation
System Compatibility
- DCS Platform: GE Mark VIe (primary); Mark VIeS (Safety) with appropriate configuration
- Terminal Boards: TRPD, TRPDH (GE Mark VIe RTD terminal boards)
- I/O Network: IONet (100 Mbps Ethernet-based GE proprietary protocol)
- Engineering Tool: GE Mark VIe Toolbox (ToolboxST)
- Backplane: Mark VIe I/O Pack backplane (standard single-width slot)
- Not compatible with: Mark VI (IS200 series) backplane without adapter; Speedtronic Mark IV/V without engineering modification
Selection Guide
Use the following criteria to confirm IS220PRTDH1A is the correct module for your application:
- ✅ Your DCS is GE Mark VIe (IS220 series I/O)
- ✅ You require RTD (PT100/PT200/Ni120) temperature inputs — not thermocouple (TC)
- ✅ Your terminal board is TRPD or TRPDH
- ✅ You need 12 differential RTD channels per module
- ✅ Your application is non-safety (SIL) — for safety loops, specify IS220PRTDH1A in Mark VIeS configuration
If your system uses thermocouples, consider the IS220PTCCH1A (TC Input Module). For mixed RTD/TC requirements, consult our engineering team for a multi-module solution.
Quality Assurance & Sourcing
- Sourcing: Konmask.com sources IS220PRTDH1A from authorized distributors and verified surplus channels
- Inspection: All modules undergo visual inspection, label verification, and functional pre-check before shipment
- Condition: New (factory sealed), Refurbished (tested), and Surplus (used, tested) options available — specify at order
- Warranty: 12-month warranty on all units; extended warranty available on request
- Documentation: GE datasheet, test report, and certificate of conformance provided upon request
- Export Compliance: ECCN classification and export license assessment available for international orders
How to Order
- Part Number: IS220PRTDH1A
- Minimum Order: 1 unit
- Lead Time: In-stock units ship within 3–5 business days; contact us for urgent requirements
- Payment: T/T, PayPal, credit card, and trade finance options available
- Shipping: DHL, FedEx, UPS worldwide; sea freight available for bulk orders
- RFQ: Email support@konmask.com with quantity, required condition, and delivery timeline
Replacement & Compatibility FAQ
Q: Can IS220PRTDH1B replace IS220PRTDH1A directly?
A: Yes. The H1B is a hardware revision of H1A and is pin- and firmware-compatible. No configuration change is required in ToolboxST.
Q: Is IS220PRTDH1A compatible with Mark VI (IS200 series)?
A: No. Mark VIe (IS220) and Mark VI (IS200) use different backplane connectors and I/O network protocols. An adapter and engineering review are required.
Q: Can I use IS220PRTDH1A for thermocouple inputs?
A: No. This module is RTD-only. For thermocouple inputs, use IS220PTCCH1A.
Q: What is the difference between TRPD and TRPDH terminal boards?
A: TRPDH is the high-density version supporting more field wiring terminations. Both are compatible with IS220PRTDH1A; select based on your field wiring density.
Q: Do you provide a test report with the module?
A: Yes. A functional test report is available upon request for all refurbished and surplus units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






