GE IS230PCAAH1A Core Analog I/O Assembly | Replacement, Equivalent & Selection Guide
The GE IS230PCAAH1A is a Core Analog I/O Assembly module designed for use in General Electric’s Mark VI and Mark VIe turbine control systems. This page provides full technical specifications, compatible replacement models, cross-reference equivalents, and a structured selection guide to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
| Part Number | IS230PCAAH1A |
| Manufacturer | General Electric (GE) |
| Series | Mark VI / Mark VIe Turbine Control |
| Module Type | Core Analog I/O Assembly |
| I/O Type | Analog Input / Output |
| Form Factor | PCB Assembly / Plug-in Module |
| Weight | Approx. 1,500 g |
| Operating Environment | Industrial / DCS / Turbine Control Panel |
| Condition Available | New, Refurbished, Tested |
Compatible Replacement & Equivalent Models
The following modules are commonly evaluated as functional replacements or equivalents for the IS230PCAAH1A. Always verify firmware revision, I/O channel count, and backplane compatibility before substitution:
- IS230PCAAH1B – Revised hardware revision; pin-compatible in most Mark VI configurations
- IS230PCAAH2A – Enhanced analog resolution variant; confirm signal range compatibility
- IS200PCAAH1A – Predecessor series; verify rack slot and connector compatibility
- IS230PCAAG1A – Adjacent part number; check I/O channel mapping differences
- Third-party analog I/O modules certified for GE Mark VI – consult Konmask engineering team for validated alternatives
Note: Cross-reference equivalency must be confirmed against your system’s I/O configuration file and GE engineering documentation before installation.
Why Choose the Original Model
- OEM Compatibility: Designed and validated by GE for Mark VI/VIe control architectures — zero firmware adaptation required
- Signal Integrity: Factory-calibrated analog channels ensure measurement accuracy critical for turbine protection loops
- Regulatory Compliance: Meets GE’s internal quality and safety standards for power generation control systems
- Long-Term Support: Original part numbers are referenced in GE service bulletins and spare parts lists
- Reduced Commissioning Risk: Drop-in replacement with no re-engineering of I/O configuration files
Typical Applications
- Gas turbine and steam turbine control panels (GE Mark VI / Mark VIe)
- Combined-cycle power plant DCS integration
- Analog sensor signal conditioning (4–20 mA, thermocouple, RTD inputs)
- Turbine speed, temperature, and pressure monitoring loops
- Industrial process control systems requiring high-density analog I/O
System Compatibility
- Primary Platform: GE Mark VI Turbine Control System
- Extended Compatibility: GE Mark VIe (verify I/O pack revision)
- Communication: Compatible with GE’s IONet and ARCNET-based control networks
- Software: Configurable via GE ToolboxST / Control System Toolbox
- Rack/Backplane: Confirm slot assignment with your system’s hardware configuration drawing
Selection Guide
Use the following criteria to determine whether the IS230PCAAH1A is the correct module for your application:
- Step 1 – Identify your control platform: Confirm your system is GE Mark VI or Mark VIe
- Step 2 – Check the I/O configuration file: Locate the module’s assigned slot and I/O type (analog vs. digital)
- Step 3 – Verify hardware revision: Match the H1A suffix to your existing installed revision to avoid firmware conflicts
- Step 4 – Confirm channel requirements: Validate the number of analog input/output channels required by your loop drawings
- Step 5 – Evaluate replacement options: If the original is unavailable, contact Konmask for a validated equivalent recommendation
Quality Assurance & Sourcing
- All IS230PCAAH1A units sourced by Konmask undergo visual inspection, functional testing, and documentation verification
- Traceability documentation available upon request (test reports, photos, serial number records)
- Units are shipped in anti-static packaging with appropriate cushioning for PCB assemblies
- Counterfeit-avoidance protocols applied: sourced from authorized distributors and verified OEM channels
- Warranty: 12-month replacement warranty on tested units (terms apply)
How to Order
- Online: Add to cart directly on this page — stock availability shown in real time
- RFQ / Bulk: Email support@konmask.com with quantity, required delivery date, and destination
- Phone/WhatsApp: +0086 19859288691 — available for urgent technical inquiries
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
- Export: International shipping available; export documentation (CO, packing list, commercial invoice) provided
Replacement & Compatibility FAQ
Q: Can IS230PCAAH1B replace IS230PCAAH1A directly?
A: In most Mark VI installations, yes — the H1B is a hardware revision of the H1A with the same functional footprint. Confirm with your GE system documentation before swapping.
Q: Is this module compatible with Mark VIe?
A: The IS230PCAAH1A is primarily designed for Mark VI. Mark VIe compatibility depends on the I/O pack revision and rack configuration — contact us for a system-specific assessment.
Q: Do you supply refurbished units?
A: Yes. All refurbished units are tested to functional specification and include a test report. New surplus units are also available subject to stock.
Q: Can you help identify the correct replacement if IS230PCAAH1A is obsolete?
A: Yes — send us your system’s I/O configuration file or hardware drawing and we will recommend a validated equivalent.
Q: What is the lead time for out-of-stock units?
A: Typically 5–15 business days depending on sourcing channel. Contact us for a firm timeline.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


